Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
This bracket adapts the APEX Through Shaft Ram to the specified Steer Smarts Yeti XD steering combination. It is a practical way to retain that matched steering hardware when fitting the ram, with the right mounting position and movement clearances established during installation.
SKU: X02-10-013
APEX verified this kit with steering tie rod 78088001 and drag link 78075001, for X02-10-001 and X02-10-003 TSR installations. Using other tie rods or drag links can create unwanted contact between critical components.
The guide requires marking and drilling the tie-rod end, starting with a 1/4 in pilot and finishing both holes at 12 mm, then deburring. It also uses specified carriage-bolt and ram-eyelet hardware from the steering-ram kit. Arrange competent installation of this steering component.
After fitting, check steering travel, ram movement and clearances. If the TSR skid plate is fitted, include the guard, eyelet and bracket in those checks. The Rock Jock bracket is an alternative for its own exact Currectlync combination, not another bracket required for this Yeti XD installation.
| Specification | Details |
|---|---|
| Brand | APEX Design USA |
| SKU | X02-10-013 |
| Verified tie rod | Steer Smarts 78088001 |
| Verified drag link | Steer Smarts 78075001 |
| Compatible TSR kits | X02-10-001 and X02-10-003 |
| Required drilling | Two tie-rod-end holes, 1/4 in pilot then 12 mm finished size |
| Guide hardware dependency | Specified hardware from the steering-ram kit |
| Post-fitting checks | Steering lock, ram travel, axle and optional skid-guard clearance |
| Other steering combinations | Not verified; can cause unwanted contact |
Yes. The guide specifies two holes, using a 1/4 in pilot before finishing to 12 mm and deburring.
Tie rod 78088001 and drag link 78075001. Do not transfer that verification to a different tie rod or drag link.
No. That is an alternative mounting kit for its own specified Currectlync steering combination.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Check dimensions, mounting points, clearance and any wiring or hose requirements against your setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
