Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Give your Raptor the Bomber look you want
The Bomber combines a low-profile plate-steel front end with an included aluminium skid plate and three centre lighting arrangements. Choose the face you want for your Raptor: twin light bars, three Baja Designs LP6 lamps or four RIGID 360 round lights, with additional cube-light mounts on the wings.
SKUs: F210012140103, F210014100103, F210014110103
Protection and a close fit
The full 3/16-inch aluminium skid plate provides underbody protection, and the bumper assembly weighs less than the OEM front bumper. Hammer Black powder coat and Satin Black panels give the steel-and-aluminium design its distinctive contrast.
Choose your off-road lighting
F210012140103 mounts two 20-inch light bars. F210014100103 mounts three Baja Designs LP6 round lights. F210014110103 mounts four 6-inch RIGID 360 round lights. The selection changes the mounts supplied with the bumper; lights and wiring are separate.
Recovery equipment and factory features
Factory tow hooks and parking sensors are retained. ACC-equipped trucks require a separate relocation bracket. A shutter motor bracket is included. On V6 Raptors, optional IC1650KIT installation requires shutter motor relocation and an additional kit on 2024+ models; Raptor R has the separately listed AC21112301NA heat exchanger option.
Fitting your bumper
On V6 Raptors, the original shutter motor is removed from the intercooler guard, reconnected and secured. The 2024 model follows the shutter motor bracket fitting route. For F210012140103, a separate shutter motor relocation kit is required for bumper installation on 2024+ V6 Raptors. Sensor tabs are trimmed only if the rings do not click into place. Professional fitting helps complete the chosen lighting and factory-equipment transfer.
Choose your option
| SKU | Option | Details |
|---|---|---|
| F210012140103 | Dual 20-inch light bars | Two 20-inch centre light-bar mounts; separate shutter motor relocation kit required on 2024+ V6 Raptors |
| F210014100103 | Baja Designs light mounts | Three centre LP6 mounts |
| F210014110103 | Rigid light mounts | Four 6-inch RIGID 360 centre mounts |
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| F210012140103 | Ford | F-150 Raptor | 2021-2026 | - |
| F210012140103 | Ford | F-150 Raptor R | 2023-2026 | - |
| F210014100103 | Ford | F-150 Raptor | 2021-2026 | - |
| F210014100103 | Ford | F-150 Raptor R | 2023-2026 | - |
| F210014110103 | Ford | F-150 Raptor | 2021-2026 | - |
| F210014110103 | Ford | F-150 Raptor R | 2023-2026 | - |
Applications shown are for North American-spec vehicles.
Fitting guide - F210012140103 / F210014100103 / F210014110103
Talk to us about compatible lighting, recovery equipment and fitting parts for your bumper.
Technical specifications
| Specification | Details |
|---|---|
| Construction | Plate-steel bumper with aluminium panels |
| Included skid plate | Full 3/16-inch aluminium |
| Bumper weight | Less than the OEM front bumper |
| Side lighting | Cube-light mounts on both wings |
| Retained equipment | Factory tow hooks and parking sensors |
| ACC | Separate relocation bracket required on equipped trucks |
| Shutter motor bracket | Included |
| F210012140103 / 2024+ V6 | Separate shutter motor relocation kit required for bumper installation |
| IC1650KIT upgrade | V6 Raptor: separate; shutter motor relocation required, with an additional kit on 2024+ models |
| Raptor R cooling option | Separate AC21112301NA heat exchanger kit |
| Sensor tabs | Trim only if mounting rings do not click into place |
| Finish | Hammer Black powder coat |
| Country of manufacture | USA |
Frequently asked questions
Are the lamps included with the lighting option?
No. The option chooses the bumper mounts. Purchase the lamps and wiring separately.
Which version takes three LP6 lights?
F210014100103 is the Baja Designs LP6 version, with three centre mounts.
Can I keep the factory tow hooks and sensors?
Yes. Both are retained, with the sensors transferred in their correct orientation.
Is the intercooler upgrade compulsory?
No. On the V6 Raptor, IC1650KIT is optional, with shutter motor relocation and an additional kit on 2024+ models. Raptor R has the separate AC21112301NA heat exchanger option.
