Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
Lazer Linear lights are a good choice when you want useful extra illumination without a large housing taking over the front of the vehicle. The slim body suits discreet installations, while the range of lengths, outputs and functions lets you choose a light for the space and journeys you have in mind.
Start with the available space and whether you need an approved road high beam or an off-road lamp. Linear-48 Standard and Linear-36, Linear-42 and Linear-48 Elite have no road high-beam approval. Then choose the Standard, Elite, Elite+ or i-LBA version offered in that size, and any listed position-light function. Check the exact lamp dimensions, output and operating mode before choosing.
| Model | Specification | SKU |
|---|---|---|
| Linear-48 | Elite | 0L48-EL-LNR |
| Linear-42 | Elite | 0L42-EL-LNR |
| Linear-36 | Elite | 0L36-EL-LNR |
| Linear-48 | Standard | 0L48-LNR |
| Linear-18 | Elite i-LBA | 0L18-LBA-B |
| Linear-42 | Standard | 0L42-LNR |
| Linear-18 | Elite+ dual colour | 0L18-PLUS-LNR |
| Linear-24 | Elite | 0L24-DBL-EL-LNR |
| Linear-36 | Standard | 0L36-DBL-LNR |
| Linear-18 | Elite with position light | 0L18-PL-LNR |
| Linear-18 | Elite | 0L18-EL-LNR |
| Linear-18 | Standard | 0L18-LNR |
| Linear-12 | Elite with position light | 0L12-PL-LNR |
| Linear-12 | Elite | 0L12-EL-LNR |
| Linear-6 | Elite+ dual colour | 0L06-PLUS-LNR |
| Linear-12 | Standard | 0L12-LNR |
| Linear-6 | Elite | 0L06-EL-LNR |
| Linear-6 | Standard | 0L06-LNR |
Applies to: 0L48-EL-LNR
When the track is narrow and the ground is uneven, you want to see more than a bright spot straight ahead. The Linear-48 Elite combines a broad 60-degree horizontal beam with 34,800 raw lumens, helping you pick out the edges of the route and the terrain around it.
At 1282 mm wide and just 40 mm high, it gives you substantial off-road lighting in a slim aluminium housing. The beam reaches 771 m at 1 lux, so you have useful distance as well as the wide spread that makes the Elite range so appealing.
96 high-output LEDs work with vacuum-metallised optics to spread the light evenly across your view. The 5,000 K colour temperature and 80 CRI help bring out detail and definition rather than relying on a cold-looking beam alone.
The controlled up/down spread is useful for roof or lower mounting positions and helps limit light spilling onto the bonnet when correctly positioned. The low-profile aerodynamic housing also helps keep wind noise down on roof installations.
The aluminium housing is anodised before its automotive-grade powder coat is applied, providing corrosion and chemical resistance. A hard-coated polycarbonate lens protects the optics, while the heatsink and electronic thermal management help preserve LED life. The lamp has IP68 weather protection.
Over-voltage and reverse-polarity protection add electrical protection. The lamp is designed and manufactured in the UK and carries a five-year Lazer warranty, subject to its terms.
You receive one lamp, a 1127k anti-theft side-mount kit, a 1L-40A-320 single-lamp wiring harness and installation instructions. The pre-wired male/female two-pin connections help your installer make a tidy electrical installation. Vehicle-specific brackets or other mounting supports must suit your chosen position.
The following output, power, distance and weight figures apply to one lamp. High-beam approval is N/A; ECE R10 is electromagnetic compatibility only.
| Specification | Details |
|---|---|
| SKU | 0L48-EL-LNR |
| Application | Universal auxiliary light bar for an appropriate off-road installation; not a vehicle-specific mounting kit |
| Construction | Slim aluminium housing; anodised and powder-coated |
| LED colour and rendering | 5,000 K; 80 CRI |
| Lens | Hard-coated polycarbonate |
| Protection | Over-voltage, reverse-polarity and electronic thermal management |
| Included mounting | 1127k anti-theft side mount |
| Included wiring | 1L-40A-320 single-lamp harness; two-pin connections |
| Warranty | Five years, subject to Lazer terms |
| Weather protection | IP68 lamp rating |
| Specification | Details |
|---|---|
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 4 kg |
| High beam function | |
| Total Luminous Flux | 34800 Lm |
| Total Driver 'FOV' Flux † | 24986 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 96 |
| Power Consumption | 364 Watts |
| Current Draw (at 14.4V) | 25.3 Amps |
| Certification | |
| High Beam | N/A |
| ECE Reference | N/A |
| Dimensions | |
| Width | 1282 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 60° |
| 0.25 lx Line | 1543m |
| 0.5 lx Line | 1091m |
| 1 lx Line | 771m |
| 3 lx Line | 445m |
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux measures the light within 45 degrees either side and 10 degrees above and below the driver's view. Lux-distance figures describe the specified illumination level at that distance; they are not a promise that every object can be seen from that far away.
Choose a firm mounting position, allow room for the heatsink and aim the lamp before its first night out. Talk to us if you want help with a suitable mounting arrangement or electrical interface.
Keep the lens clean, check fixings and wiring during regular servicing and follow the supplied cleaning instructions. A well-fitted, correctly aimed bar is how you make the most of the light you have paid for.
No. This Linear-48 Elite has no ECE high-beam approval. ECE R10 concerns electromagnetic compatibility and does not make it an approved road driving light.
It is a 1282 x 62 x 40 mm light bar supplied with side mounts, rather than a complete vehicle-specific kit. Check the available space, secure mounting points and the required cable route for your installation.
No. The 34,800-raw-lumen output and 771 m at 1 lux apply to one lamp.
One lamp consumes 364 W and draws 25.3 A at 14.4 V. Use the correct harness and follow the fitting instructions rather than connecting it directly to a small accessory feed.
Applies to: 0L42-EL-LNR
When the track is narrow and the ground is uneven, you want to see more than a bright spot straight ahead. The Linear-42 Elite combines a broad 60-degree horizontal beam with 33,300 raw lumens, helping you pick out the edges of the route and the terrain around it.
At 1132 mm wide and just 40 mm high, it gives you substantial off-road lighting in a slim aluminium housing. The beam reaches 765 m at 1 lux, so you have useful distance as well as the wide spread that makes the Elite range so appealing.
84 high-output LEDs work with vacuum-metallised optics to spread the light evenly across your view. The 5,000 K colour temperature and 80 CRI help bring out detail and definition rather than relying on a cold-looking beam alone.
The controlled up/down spread is useful for roof or lower mounting positions and helps limit light spilling onto the bonnet when correctly positioned. The low-profile aerodynamic housing also helps keep wind noise down on roof installations.
The aluminium housing is anodised before its automotive-grade powder coat is applied, providing corrosion and chemical resistance. A hard-coated polycarbonate lens protects the optics, while the heatsink and electronic thermal management help preserve LED life. The lamp has IP68 weather protection.
Over-voltage and reverse-polarity protection add electrical protection. The lamp is designed and manufactured in the UK and carries a five-year Lazer warranty, subject to its terms.
You receive one lamp, a 1127k anti-theft side-mount kit, a 1L-40A-320 single-lamp wiring harness and installation instructions. The pre-wired male/female two-pin connections help your installer make a tidy electrical installation. Vehicle-specific brackets or other mounting supports must suit your chosen position.
The following output, power, distance and weight figures apply to one lamp. High-beam approval is N/A; ECE R10 is electromagnetic compatibility only.
| Specification | Details |
|---|---|
| SKU | 0L42-EL-LNR |
| Application | Universal auxiliary light bar for an appropriate off-road installation; not a vehicle-specific mounting kit |
| Construction | Slim aluminium housing; anodised and powder-coated |
| LED colour and rendering | 5,000 K; 80 CRI |
| Lens | Hard-coated polycarbonate |
| Protection | Over-voltage, reverse-polarity and electronic thermal management |
| Included mounting | 1127k anti-theft side mount |
| Included wiring | 1L-40A-320 single-lamp harness; two-pin connections |
| Warranty | Five years, subject to Lazer terms |
| Weather protection | IP68 lamp rating |
| Specification | Details |
|---|---|
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 3.5 kg |
| High beam function | |
| Total Luminous Flux | 33300 Lm |
| Total Driver 'FOV' Flux † | 23909 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 84 |
| Power Consumption | 355 Watts |
| Current Draw (at 14.4V) | 24.7 Amps |
| Certification | |
| High Beam | N/A |
| ECE Reference | N/A |
| Dimensions | |
| Width | 1132 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 60° |
| 0.25 lx Line | 1530m |
| 0.5 lx Line | 1082m |
| 1 lx Line | 765m |
| 3 lx Line | 442m |
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux measures the light within 45 degrees either side and 10 degrees above and below the driver's view. Lux-distance figures describe the specified illumination level at that distance; they are not a promise that every object can be seen from that far away.
Choose a firm mounting position, allow room for the heatsink and aim the lamp before its first night out. Talk to us if you want help with a suitable mounting arrangement or electrical interface.
Keep the lens clean, check fixings and wiring during regular servicing and follow the supplied cleaning instructions. A well-fitted, correctly aimed bar is how you make the most of the light you have paid for.
No. This Linear-42 Elite has no ECE high-beam approval. ECE R10 concerns electromagnetic compatibility and does not make it an approved road driving light.
It is a 1132 x 62 x 40 mm light bar supplied with side mounts, rather than a complete vehicle-specific kit. Check the available space, secure mounting points and the required cable route for your installation.
No. The 33,300-raw-lumen output and 765 m at 1 lux apply to one lamp.
One lamp consumes 355 W and draws 24.7 A at 14.4 V. Use the correct harness and follow the fitting instructions rather than connecting it directly to a small accessory feed.
Applies to: 0L36-EL-LNR
When the track is narrow and the ground is uneven, you want to see more than a bright spot straight ahead. The Linear-36 Elite combines a broad 60-degree horizontal beam with 29,700 raw lumens, helping you pick out the edges of the route and the terrain around it.
At 982 mm wide and just 40 mm high, it gives you substantial off-road lighting in a slim aluminium housing. The beam reaches 712 m at 1 lux, so you have useful distance as well as the wide spread that makes the Elite range so appealing.
72 high-output LEDs work with vacuum-metallised optics to spread the light evenly across your view. The 5,000 K colour temperature and 80 CRI help bring out detail and definition rather than relying on a cold-looking beam alone.
The controlled up/down spread is useful for roof or lower mounting positions and helps limit light spilling onto the bonnet when correctly positioned. The low-profile aerodynamic housing also helps keep wind noise down on roof installations.
The aluminium housing is anodised before its automotive-grade powder coat is applied, providing corrosion and chemical resistance. A hard-coated polycarbonate lens protects the optics, while the heatsink and electronic thermal management help preserve LED life. The lamp has IP68 weather protection.
Over-voltage and reverse-polarity protection add electrical protection. The lamp is designed and manufactured in the UK and carries a five-year Lazer warranty, subject to its terms.
You receive one lamp, a 1127k anti-theft side-mount kit, a 1L-40A-320 single-lamp wiring harness and installation instructions. The pre-wired male/female two-pin connections help your installer make a tidy electrical installation. Vehicle-specific brackets or other mounting supports must suit your chosen position.
The following output, power, distance and weight figures apply to one lamp. High-beam approval is N/A; ECE R10 is electromagnetic compatibility only.
| Specification | Details |
|---|---|
| SKU | 0L36-EL-LNR |
| Application | Universal auxiliary light bar for an appropriate off-road installation; not a vehicle-specific mounting kit |
| Construction | Slim aluminium housing; anodised and powder-coated |
| LED colour and rendering | 5,000 K; 80 CRI |
| Lens | Hard-coated polycarbonate |
| Protection | Over-voltage, reverse-polarity and electronic thermal management |
| Included mounting | 1127k anti-theft side mount |
| Included wiring | 1L-40A-320 single-lamp harness; two-pin connections |
| Warranty | Five years, subject to Lazer terms |
| Weather protection | IP68 lamp rating |
| Specification | Details |
|---|---|
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 2.7 kg |
| High beam function | |
| Total Luminous Flux | 29700 Lm |
| Total Driver 'FOV' Flux † | 21325 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 72 |
| Power Consumption | 308 Watts |
| Current Draw (at 14.4V) | 21.4 Amps |
| Certification | |
| High Beam | N/A |
| ECE Reference | N/A |
| Dimensions | |
| Width | 982 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 60° |
| 0.25 lx Line | 1423m |
| 0.5 lx Line | 1006m |
| 1 lx Line | 712m |
| 3 lx Line | 411m |
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux measures the light within 45 degrees either side and 10 degrees above and below the driver's view. Lux-distance figures describe the specified illumination level at that distance; they are not a promise that every object can be seen from that far away.
Choose a firm mounting position, allow room for the heatsink and aim the lamp before its first night out. Talk to us if you want help with a suitable mounting arrangement or electrical interface.
Keep the lens clean, check fixings and wiring during regular servicing and follow the supplied cleaning instructions. A well-fitted, correctly aimed bar is how you make the most of the light you have paid for.
No. This Linear-36 Elite has no ECE high-beam approval. ECE R10 concerns electromagnetic compatibility and does not make it an approved road driving light.
It is a 982 x 62 x 40 mm light bar supplied with side mounts, rather than a complete vehicle-specific kit. Check the available space, secure mounting points and the required cable route for your installation.
No. The 29,700-raw-lumen output and 712 m at 1 lux apply to one lamp.
One lamp consumes 308 W and draws 21.4 A at 14.4 V. Use the correct harness and follow the fitting instructions rather than connecting it directly to a small accessory feed.
Applies to: 0L48-LNR
For off-road journeys, the Linear-48 combines 18,000 raw lumens with 550 m at 1 lux in a slim 40 mm-high housing. Its broad beam helps you see the track and surrounding ground. This model does not have ECE road high-beam approval.
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp. Raw lumens, driver field-of-view flux and lux-distance are different measurements. This lamp does not have ECE road high-beam approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L48-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Supplied detail | Includes low profile side mounting brackets (anti-theft solutions included on Linear-36/42/48) |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Lamp weight | 4 kg |
| High beam function | |
| Total Luminous Flux | 18000 Lm |
| Total Driver 'FOV' Flux | 12816 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 48 |
| Power Consumption | 168 Watts |
| Current Draw (at 14.4V) | 11.7 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | No ECE road high-beam approval |
| ECE Reference | N/A |
| Dimensions | |
| Width | 1282 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal / vertical beam angle | 50 / 20 degrees |
| 0.25 lx Line | 1101 metres |
| 0.5 lx Line | 779 metres |
| 1 lx Line | 550 metres |
| 3 lx Line | 318 metres |
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L18-LBA-B
Intelligent Low Beam Assist uses sensors and controlled lighting zones to help manage the transition from high beam as oncoming lights approach. You retain strong high-beam performance while gaining a more responsive auxiliary-light function.
It is not an approved replacement dipped-beam headlamp. Use the specified E-Mark high-beam mode and the secondary control to disable the assist function where required. Follow the exact installation and operating instructions.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L18-LBA-B |
| Lighting detail | Combination of 48 high efficiency LEDs deliver exceptional lighting performance |
| Lighting detail | Low Beam Assist mode provides superior short/mid-range visibility |
| Lighting detail | Integrated photoelectric sensors detect oncoming traffic and obstacles so that light output responds to surroundings in Low Beam Assist mode |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions |
| Specification | Sleek, low profile design eases installation |
| Electrical detail | Supplied with Single-Lamp Wiring Kit |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Electrical connection made via 4-pin Deutsch connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Supplied with | One Linear-18 Elite i-LBA lamp; 1127K anti-theft side mounts; 1L-LP-LBA-150 wiring kit; instructions |
| Lamp dimensions (W x D x H) | 532 x 62 x 40 mm |
| Assist sensors | Two sensors scan more than 30 times per second |
| Lens guarantee | Separate Lifetime Lens Guarantee, subject to terms; the lamp has its stated five-year warranty |
| Ingress protection | IP68 |
| Specification | E-Boost | E-Mark Mode |
|---|---|---|
| Voltage Range (DC) | 10-32V | 10-32V |
| LED Life | 50,000 hrs | 50,000 hrs |
| Weight | 1.1 kg | 1.1 kg |
| High beam function | ||
| Total Luminous Flux | 18000 Lm | 5538 Lm |
| Total Driver 'FOV' Flux | 12816 Lm | 3943 Lm |
| Colour Temperature | 5000k | 5000k |
| Number of High Output LEDs | 48 | 48 |
| Power Consumption | 135 Watts | 43 Watts |
| Current draw at 14.4 V | 10.4 A (Boost) | 3.2 A (E-Mark) |
| Start-up Time * | 100ms | |
| Certification | ||
| High Beam | N/A | ECE R112 |
| E-Mark Ref | N/A | 17.5 |
| Photometric data | ||
| Horiz Beam Angle | 60° | 60° |
| 0.25 lx Line | 1043m | 571m |
| 0.5 lx Line | 738 m | 404m |
| 1 lx Line | 522m | 286m |
| 3 lx Line | 301m | 165m |
Start-up time is the delay between applying power and the lamp lighting. Match start-up times when combining different Lazer lamps on the same vehicle.
The i-LBA sensors recalibrate as conditions change and can react to reflective objects as well as approaching headlights. The assist function has a restart delay after switching. Use the secondary switch to disable assist when required; it does not replace your original dipped headlights.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
No. It is an auxiliary assist function, not an approved replacement low-beam headlamp. Retain the original dipped headlights and follow the assist-function controls and restrictions.
Applies to: 0L42-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L42-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Supplied detail | Includes low profile side mounting brackets (anti-theft solutions included on Linear-36/42/48) |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Lamp weight | 3.5 kg (lamp only) |
| High beam function | |
| Total Luminous Flux | 15750 Lm |
| Total Driver 'FOV' Flux | 11214 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 42 |
| Power Consumption | 147 Watts |
| Current Draw (at 14.4V) | 10.2 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 50 |
| Dimensions | |
| Width | 1132 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal / vertical beam angle | 50 / 20 degrees |
| 0.25 lx Line | 984 metres |
| 0.5 lx Line | 696 metres |
| 1 lx Line | 492 metres |
| 3 lx Line | 284 metres |
| Supplied with | One lamp; 1127K anti-theft side mounts; instructions. The wiring harness is separate |
When combining different Lazer lamp types on the same vehicle, match their start-up delays. Start-up time is the delay between applying power and the lamp lighting.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L18-PLUS-LNR
White Boost gives high-output illumination for clear conditions off road. Combo brings the white and yellow LEDs together for a different balance of output and colour, while yellow Snow/Fog/Dust mode directs light lower and towards the sides when suspended dust or poor weather makes full white light less comfortable.
A separate reduced-output white E-Mark mode provides the approved road high beam. Cycle the modes using the specified momentary switch; the yellow function is not an approved front fog lamp. Keep each mode's figures separate when comparing output and electrical load.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L18-PLUS-LNR |
| Lighting detail | Combination of highly efficient white (5000k) and PC-yellow LEDs |
| Lighting detail | Yellow LEDs optimised for use in snow / fog / dust conditions |
| Electrical detail | Supplied with One-Lamp Wiring Kit |
| Specification | Momentary switch facilitates switching lighting modes |
| Specification | Memory function recalls preferred lighting mode without needing to re-select each journey |
| Specification | Sleek, low profile design facilitates installation |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Construction | Anodised pre-treatment and Automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Protection / testing | IP68 watertight |
| Manufacture | Designed & manufactured in the UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Supplied with | One Linear-18 Elite+ lamp; 1127K anti-theft side mounts; 1L-28A-200 wiring harness; instructions |
| Lamp connector | 3-pin Aptiv |
| Lens guarantee | Separate Lifetime Lens Guarantee, subject to terms; the lamp has its stated five-year warranty |
| Specification | White LED's (E-Boost / E-Mark Mode) | Yellow LED's (Fog / Dust / Snow Mode) | White & Yellow LED's (Combo Mode) |
|---|---|---|---|
| Voltage Range (DC) | 10-32V | 10-32V | 10-32V |
| LED Life | 50,000 hours | 50,000 hours | 50,000 hours |
| Weight | 1090 gr | 1090 gr | 1090 gr |
| High beam function | |||
| Total Luminous Flux | 14850 / 4455 Lm | 6150 Lm | 21000 Lm |
| Total Driver 'FOV' Flux | 10573 / 3172 Lm | 3737 Lm | 14284 Lm |
| Colour Temperature | 5000K | PC Yellow | N/A |
| Number of High Output LEDs | 36 | 18 | 36 White / 18 Yellow |
| Power Consumption | 134 W / 39 W | 56 W | 190 W |
| Current draw at 14.4 V | 9.9 A / 2.7 A | 4.1 A | 14.1 A |
| Peak Current Draw | 13.3 A / 3.8 A | 6.1 A | 19 A |
| Certification | |||
| High Beam | R149 ref 27.5 in reduced white E-Mark mode only | N/A | |
| ECE Reference | 27.5 in reduced white E-Mark mode only | ||
| Dimensions | |||
| Width | 532 mm | 532 mm | 532 mm |
| Depth | 62 mm | 62 mm | 62 mm |
| Height | 40 mm | 40 mm | 40 mm |
| Photometric data | |||
| Horizontal Beam Angle | 84 o | 84 o | 84 o |
| 0.25 lx Line | 1152m / 694m | 472m | 1217m |
| 0.5 lx Line | 815m / 491m | 334m | 860m |
| 1 lx Line | 576m / 347m | 236m | 608m |
| 3 lx Line | 333m / 200m | 136m | 351m |
Hold the momentary switch for two seconds to select white E-Mark mode. The memory function recalls your last selected mode.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L24-DBL-EL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L24-DBL-EL-LNR |
| Lighting detail | Combination of highly efficient 3W ‘premium bin’ LEDs |
| Specification | Dual-output mode allows the light to be operated at a lower UNECE E-mark reference (requires Linear E-Mark Cap - sold separately) |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Supplied detail | Flexible mounting options - anti-theft side mounting brackets included |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Optional lower-reference cap | Separate purchase; R112 ref 2x 17.5 when correctly fitted |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Lamp weight | 2 kg (lamp only) |
| High beam function | |
| Total Luminous Flux | 18000 Lm |
| Total Driver 'FOV' Flux | 12815 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 24 |
| Power Consumption | 188 Watts |
| Current draw at 14.4 V | 13.1 A |
| Start-up Time * | 5ms |
| Certification | |
| High Beam | ECE R149; optional separate cap gives R112 ref 2x 17.5 |
| ECE Reference | 2x 30 |
| Dimensions | |
| Width | 682mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal / vertical beam angle | 64 / 15 degrees |
| 0.25 lx Line | 1126 metres |
| 0.5 lx Line | 796 metres |
| 1 lx Line | 563 metres |
| 3 lx Line | 325 metres |
| Supplied with | One lamp; 1127K anti-theft side mounts; instructions. The wiring harness is separate |
| Ingress protection | IP68 |
When combining different Lazer lamp types on the same vehicle, match their start-up delays. Start-up time is the delay between applying power and the lamp lighting.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L36-DBL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L36-DBL-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Supplied detail | Includes low profile side mounting brackets (anti-theft solutions included on Linear-36/42/48) |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Lamp weight | 2.7 kg (lamp only) |
| High beam function | |
| Total Luminous Flux | 13,500 lm |
| Total Driver 'FOV' Flux | 9,612 lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 36 |
| Power Consumption | 126 W |
| Current draw at 14.4 V | 8.8 A |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 2x 30 |
| Dimensions | |
| Width | 982 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal / vertical beam angle | 50 / 20 degrees |
| 0.25 lx Line | 940 metres |
| 0.5 lx Line | 665 metres |
| 1 lx Line | 470 metres |
| 3 lx Line | 271 metres |
| Supplied with | One lamp; 1127K anti-theft side mounts; instructions. The wiring harness is separate |
| Ingress protection | IP68 |
When combining different Lazer lamp types on the same vehicle, match their start-up delays. Start-up time is the delay between applying power and the lamp lighting.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L18-PL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The integrated white position light gives a subtle signature when the main beam is off. Its R7 approval is separate from the R112 ref45 high beam.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L18-PL-LNR |
| Lighting detail | Combination of highly efficient 3 W ‘premium bin’ LEDs |
| Specification | Integrated position light function |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Supplied detail | Flexible mounting options - anti-theft side mounting brackets included |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Voltage Range (DC) | 10-32 V |
| LED Life | 50,000 hours |
| Weight | 1090 gr |
| High beam function | |
| Total Luminous Flux | 12150 Lm |
| Total Driver 'FOV' Flux | 8651 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 36 |
| Power Consumption | 126 Watts |
| Current Draw (at 14.4 V) | 8.8 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 45 |
| Position Light | ECE R7 |
| Dimensions | |
| Width | 532 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 64° |
| 0.25 lx Line | 975 metres |
| 0.5 lx Line | 690 metres |
| 1 lx Line | 488 metres |
| 3 lx Line | 282 metres |
| Ingress protection | IP68 |
| Lamp connector | 3-pin Superseal |
| Supplied with | One lamp; 1127K anti-theft side mounts; instructions. Wiring is separate |
When combining different Lazer lamp types on the same vehicle, match their start-up delays. Start-up time is the delay between applying power and the lamp lighting.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L18-EL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
The 40 mm-high body keeps the installation discreet, while 12,150 raw lumens and a 64-degree horizontal beam give you useful light across the road. It reaches 488 m at 1 lux, with 5,000 K colour and 80 CRI for clear definition.
Anti-theft side mounts are included, helping you look after a premium lamp once it is fitted.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L18-EL-LNR |
| Lighting detail | Combination of highly efficient 3W ‘premium bin’ LEDs |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Protection / testing | IP67 watertight |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Supplied with | One 0L18-EL-LNR single-E-mark lamp; 1127K anti-theft side mounts; instructions. Wiring is separate |
| Lamp configuration | Fixed white high beam; no position light or i-LBA |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 1090 gr |
| High beam function | |
| Total Luminous Flux | 12150 Lm |
| Total Driver 'FOV' Flux | 8651 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 36 |
| Power Consumption | 126 Watts |
| Current Draw (at 14.4V) | 8.8 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 45 |
| Dimensions | |
| Width | 532 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 64° |
| 0.25 lx Line | 975 metres |
| 0.5 lx Line | 690 metres |
| 1 lx Line | 488 metres |
| 3 lx Line | 282 metres |
| EMC certification | ECE R10 |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L18-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L18-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Connections | Supplied with pre-wired male/female 2-pin Superseal connectors |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 1090 gr |
| High beam function | |
| Total Luminous Flux | 6750 Lm |
| Total Driver 'FOV' Flux | 4806 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 18 |
| Power Consumption | 63 Watts |
| Current Draw (at 14.4V) | 4.4 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 30 |
| Dimensions | |
| Width | 532 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 56° |
| 0.25 lx Line | 855 metres |
| 0.5 lx Line | 605 metres |
| 1 lx Line | 428 metres |
| 3 lx Line | 247 metres |
| Supplied with | One Linear-18 Standard;1126K side mounts;instructions. 1127K anti-theft mounts and wiring are separate |
| EMC certification | ECE R10 |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L12-PL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
This lamp includes a white position light, approved to R7, for a subtle signature when the high beam is off.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L12-PL-LNR |
| Lighting detail | Combination of highly efficient 3W ‘premium bin’ LEDs |
| Specification | Integrated position light function |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Lamp connector | 3-pin Superseal |
| Supplied with | One Linear-12 Elite lamp; 1127K anti-theft side mounts; instructions. Wiring is separate |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 800 gr |
| High beam function | |
| Total Luminous Flux | 8100 Lm |
| Total Driver 'FOV' Flux | 5767 Lm |
| Number of High Output LEDs | 24 |
| Power Consumption | 84 Watts |
| Current Draw (at 14.4V) | 5.8 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 37.5 |
| Position Light | ECE R7 |
| Dimensions | |
| Width | 382 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 64 Degrees |
| 0.25 lx Line | 796 metres |
| 0.5 lx Line | 563 metres |
| 1 lx Line | 398 metres |
| 3 lx Line | 230 metres |
| EMC certification | ECE R10 |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L12-EL-LNR
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L12-EL-LNR |
| Lighting detail | Combination of highly efficient 3W ‘premium bin’ LEDs |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Lamp connector | 2-pin Superseal |
| Supplied with | One Linear-12 Elite lamp; 1127K anti-theft side mounts; instructions. Wiring is separate |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 800 gr |
| High beam function | |
| Total Luminous Flux | 8100 Lm |
| Total Driver 'FOV' Flux | 5767 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 24 |
| Power Consumption | 84 Watts |
| Current Draw (at 14.4V) | 5.8 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 37.5 |
| Dimensions | |
| Width | 382 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 64 degrees |
| 0.25 lx Line | 796 metres |
| 0.5 lx Line | 563 metres |
| 1 lx Line | 398 metres |
| 3 lx Line | 230 metres |
| EMC certification | ECE R10 |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L06-PLUS-LNR
White Boost gives high-output illumination for clear conditions off road. Combo brings the white and yellow LEDs together for a different balance of output and colour, while yellow Snow/Fog/Dust mode directs light lower and towards the sides when suspended dust or poor weather makes full white light less comfortable.
A separate reduced-output white E-Mark mode provides the approved road high beam. Cycle the modes using the specified momentary switch; the yellow function is not an approved front fog lamp. Keep each mode's figures separate when comparing output and electrical load.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
White Boost produces 5,100 raw lumens, about 25% above the 4,050 raw-lumen Linear-6 Elite. Combo combines white and yellow LEDs for 7,100 raw lumens from the 232 mm lamp. These are output comparisons, not claims of an equivalent increase in reach.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements. Higher-output modes are separate from any lower-output road approval.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L06-PLUS-LNR |
| Lighting detail | Combination of highly efficient white (5000k) and PC-yellow LEDs |
| Lighting detail | Yellow LEDs optimised for use in snow / fog / dust conditions |
| Electrical detail | Compatible One-Lamp / Two-Lamp Wiring Kits available |
| Specification | Momentary switch facilitates switching lighting modes |
| Specification | Memory function recalls preferred lighting mode without needing to re-select each journey |
| Specification | Sleek, low profile design facilitates installation |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Construction | Anodised pre-treatment and Automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Protection / testing | IP68 watertight |
| Manufacture | Designed & manufactured in the UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Lamp connector | 3-pin, 25 cm cable |
| Supplied with | One Linear-6 Elite+ lamp; 1127K anti-theft side mounts; instructions. One- or two-lamp three-pin wiring harness is separate |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Quick mode selection | Hold the momentary switch for two seconds to select white E-Mark mode |
| Lens guarantee | Separate Lifetime Lens Guarantee,subject to terms |
| Specification | White LED's (E-Boost / E-Mark Mode) | Yellow LED's (Fog / Dust / Snow Mode) | White & Yellow LED's (Combo Mode) |
|---|---|---|---|
| Voltage Range (DC) | 10-32V | 10-32V | 10-32V |
| LED Life | 50,000 hours | 50,000 hours | 50,000 hours |
| Weight | 495 gr | 495 gr | 495 gr |
| High beam function | |||
| Total Luminous Flux | 5100 / 2500 Lm | 2,000 Lm | 7,100 Lm |
| Total Driver 'FOV' Flux | 3645 / 1822 Lm | 1,200 Lm | 4,774 Lm |
| Colour Temperature | 5000K | PC Yellow | N/A |
| Number of High Output LEDs | 12 | 6 | 12 White / 6 Yellow |
| Power Consumption | 48 W / 24 W | 21 W | 69 W |
| Current draw at14.4V | 3.6 A / 1.8 A | 1.5 A | 5.1 A |
| Peak Current Draw | 4.9 A / 2.5 A | 2 A | 6.9 A |
| Certification | |||
| High Beam | ECE R149 | N/A | |
| ECE Reference | 12.5 in reduced white E-Mark mode only | ||
| Dimensions | |||
| Width | 232 mm | 232 mm | 232 mm |
| Depth | 62 mm | 62 mm | 62 mm |
| Height | 40 mm | 40 mm | 40 mm |
| Photometric data | |||
| Horizontal Beam Angle | 84 o | 84 o | 84 o |
| 0.25 lx Line | 600m / 424m | 263m | 621m |
| 0.5 lx Line | 424m /300m | 186m | 439m |
| 1 lx Line | 300m / 212m | 131m | 311m |
| 3 lx Line | 173m / 122m | 76m | 179m |
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L12-LNR
The 40 mm-high Linear-12 produces 4,500 raw lumens and reaches 349 m at 1 lux. Its 56-degree horizontal beam gives you useful light across the road from a discreet 382 mm-wide body.
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L12-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Supplied with | One lamp; 1126K standard side mounts; instructions. Wiring is separate |
| Lamp connector | 2-pin Superseal |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Lamp weight | 0.8 kg |
| High beam function | |
| Total Luminous Flux | 4500 Lm |
| Total Driver 'FOV' Flux | 3204 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 12 |
| Power Consumption | 42 Watts |
| Current Draw (at 14.4V) | 2.92 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 27.5 |
| Dimensions | |
| Width | 382 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 56 degrees |
| 0.25 lx Line | 698 metres |
| 0.5 lx Line | 494 metres |
| 1 lx Line | 349 metres |
| 3 lx Line | 202 metres |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L06-EL-LNR
The Linear-6 Elite gives 4,050 raw lumens and a 64-degree horizontal spread from the same compact 232 x 62 x 40 mm size. That is 1.8 times the raw output of Standard, with 282 m at 1 lux and anti-theft side mounts included.
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L06-EL-LNR |
| Lighting detail | Combination of highly efficient 3W ‘premium bin’ LEDs |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Supplied with | One lamp; 1127K anti-theft side mounts; instructions. Wiring is separate |
| Lamp connector | 2-pin Superseal |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 495 gr |
| High beam function | |
| Total Luminous Flux | 4050 Lm |
| Total Driver 'FOV' Flux | 2884 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 12 |
| Power Consumption | 42 Watts |
| Current Draw (at 14.4V) | 2.9 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 17.5 |
| Dimensions | |
| Width | 232 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 64 degrees |
| 0.25 lx Line | 563 metres |
| 0.5 lx Line | 398 metres |
| 1 lx Line | 282 metres |
| 3 lx Line | 163 metres |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Applies to: 0L06-LNR
With 2,250 raw lumens from 21 W, Linear-6 Standard adds useful auxiliary light without a bulky lamp or a high electrical load. The 232 mm body is only 40 mm high, with a 56-degree horizontal beam and 247 m at 1 lux.
The low-profile design gives you a useful spread of light without a bulky housing. Its controlled vertical distribution helps limit unwanted spill onto the bonnet when correctly positioned, while the aerodynamic shape helps keep roof-mounted wind noise down.
The optics spread light across your view so you can read more of the road edges and surrounding ground. Choose the beam for the roads and tracks you use: reach helps on open stretches, while side coverage helps you read bends and the ground beside you.
The housing, optics and thermal design are made to work together, helping the lamp deliver useful light while controlling heat. Corrosion protection and a hard-coated lens help it stand up to wet roads, dirt and regular use.
Correct mounting, clean lenses and a properly protected electrical installation help you get the value from the light over time.
Figures apply to one lamp and the stated mode. Raw lumens, driver field-of-view flux and lux-distance are different measurements.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 0L06-LNR |
| Lighting detail | Highly efficient 3W LED technology |
| Lighting detail | 5000K LED colour temperature and 80CRI maximises sharpness and definition |
| Specification | Vacuum-metallised optics deliver wide spread of light |
| Mounting / fixing | Reduced up/down spread of light suits even low mounting positions, or roof mounting |
| Specification | Sleek, low profile design eases installation |
| Specification | Aero design virtually eliminates wind noise on roof installations |
| Lighting detail | Electronic thermal management system optimises light output to preserve longevity of the LEDs |
| Construction | Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection |
| Specification | CAE optimised heatsink offers improved thermal dynamics |
| Electrical detail | Over voltage protected |
| Specification | Reverse polarity protected |
| Manufacture | Designed and manufactured in UK |
| Warranty | Five-year Lazer warranty, subject to terms |
| Ingress protection | IP68 |
| Supplied with | One lamp; 1126K standard side mounts; instructions. Wiring is separate |
| Lamp connector | 2-pin Superseal |
| Electrical protection | Electronic thermal management, over-voltage and reverse-polarity protection |
| Finish / lens | Corrosion-resistant pre-treatment and coating; hard-coated polycarbonate lens |
| Voltage Range (DC) | 10-32V |
| LED Life | 50,000 hours |
| Weight | 495 gr |
| High beam function | |
| Total Luminous Flux | 2250 Lm |
| Total Driver 'FOV' Flux | 1602 Lm |
| Colour Temperature | 5000K |
| Number of High Output LEDs | 6 |
| Power Consumption | 21 Watts |
| Current Draw (at 14.4V) | 1.5 Amps |
| Start-up Time * | 100ms |
| Certification | |
| High Beam | ECE R112 |
| ECE Reference | 12.5 |
| Dimensions | |
| Width | 232 mm |
| Depth | 62 mm |
| Height | 40 mm |
| Photometric data | |
| Horizontal Beam Angle | 56 degrees |
| 0.25 lx Line | 494 metres |
| 0.5 lx Line | 349 metres |
| 1 lx Line | 247 metres |
| 3 lx Line | 143 metres |
The lamp has a 100 ms start-up time. Follow the instructions when combining lamps with different start-up delays so their switching is coordinated.
Use the mounting parts and wiring specified for this exact lamp. Any separate vehicle brackets, interface or additional wiring are separate purchases unless included in the package details. Talk to us if you would like help planning the installation.
Follow the instructions for the fused supply, mode controls, aiming and cleaning. Check fixings and cable protection during regular servicing.
Tell us the lamp or equipment you are using and how you want to fit it. We can help you choose the matching parts.
Applies to: 0L36-EL-LNR, 0L42-EL-LNR, 0L48-EL-LNR
Yes. The package includes the 1127k anti-theft side-mount kit and 1L-40A-320 single-lamp harness, along with the lamp and instructions.
Applies to: 0L06-EL-LNR, 0L06-LNR, 0L06-PLUS-LNR, 0L12-EL-LNR, 0L12-LNR, 0L12-PL-LNR, 0L18-EL-LNR, 0L18-LBA-B, 0L18-LNR, 0L18-PL-LNR, 0L18-PLUS-LNR, 0L24-DBL-EL-LNR, 0L36-DBL-LNR, 0L42-LNR, 0L48-LNR
The price is for one lamp. Its lamp specifications apply to one lamp unless a separate paired or mode comparison is explicitly labelled.
Applies to: 0L06-PLUS-LNR, 0L18-LBA-B, 0L18-PL-LNR, 0L18-PLUS-LNR, 0L24-DBL-EL-LNR, 0L36-DBL-LNR, 0L42-LNR, 0L48-LNR
No. ECE R10 concerns electromagnetic compatibility. Road high-beam approval is a separate regulation and can apply only to a specified lower-output mode.
Applies to: 0L06-EL-LNR, 0L06-LNR, 0L06-PLUS-LNR, 0L12-EL-LNR, 0L12-LNR, 0L12-PL-LNR, 0L18-EL-LNR, 0L18-LBA-B, 0L18-LNR, 0L18-PL-LNR, 0L18-PLUS-LNR, 0L24-DBL-EL-LNR, 0L36-DBL-LNR, 0L42-LNR, 0L48-LNR
This is the lamp itself rather than a complete vehicle-specific installation. Check its dimensions, compatible mounts, wiring and control requirements for the chosen position.
Applies to: 0L06-EL-LNR, 0L06-LNR, 0L06-PLUS-LNR, 0L12-EL-LNR, 0L12-LNR, 0L12-PL-LNR, 0L18-EL-LNR, 0L18-LBA-B, 0L18-LNR, 0L18-PL-LNR, 0L18-PLUS-LNR, 0L24-DBL-EL-LNR, 0L36-DBL-LNR, 0L42-LNR, 0L48-LNR
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux describes useful light within 45 degrees either side and 10 degrees above and below the driver's view. A lux-distance figure states the illumination level at that distance, rather than how far every object can be seen.
Applies to: 0L06-PLUS-LNR, 0L18-PLUS-LNR
No. Yellow Snow/Fog/Dust is an additional lighting function. The approved road high beam uses the specified white E-Mark mode.
Applies to: 0L12-EL-LNR, 0L12-PL-LNR, 0L18-EL-LNR, 0L18-LNR
ECE R10 covers electromagnetic compatibility. This lamp has the separate R112 high-beam approval shown in the specifications.
Applies to: 0L06-EL-LNR, 0L06-LNR, 0L12-LNR
R10 covers electromagnetic compatibility. This lamp has the separate R112 road high-beam approval stated in its specifications; this is a fixed-output lamp.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Check dimensions, mounting points, clearance and any wiring or hose requirements against your setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
Some items need a delivery quote. You can buy the other items now.
Items needing a quote will be saved in this browser. Return to your basket to restore them and request a quote.Sign in to save your quote items to your account. Access them from any device.
These items are saved in this browser and are not in your checkout. Restore them to your basket when you are ready to request a quote.
Sign in to save your quote items to your account. Access them from any device.
