Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
The drive in your VW Golf does not have to finish when the daylight does. This Lazer lighting kit gives you a clearer view ahead, with lamps positioned neatly at the front of the vehicle rather than a large exposed bar dominating its appearance.
For Golf Mk7 2017-2019 with the specified bumper-beam mounting arrangement.
A useful beam is about more than a bright spot in the distance. Light across the road edges and the surrounding ground helps you read bends, entrances and uneven terrain, while the selected lamp's long-range beam extends your view ahead.
The vehicle-specific mounting arrangement holds the lights in the intended position and gives the installer a secure way to aim them. The lamp choice and operating mode determine the output and approved use; a grille mount alone does not make every lamp function road approved.
Linear-18 gives you a slim bar with a broad view of the road. Standard has a lower electrical draw; Elite puts more light across the same discreet mounting position.
The Linear-18 Elite position-light option adds a white position light as well as its high beam. It has its own output and connector specification.
The i-LBA option adds Intelligent Low Beam Assist. After more than three seconds of high-beam use, it enters assist when the high beam is switched off, unless disabled with its separate switch. Its sensors respond to oncoming light and reflective signs, reducing the affected light zones. Lazer recommends mounting below 1 m for best sensor performance and keeping the lens clean. It is not an approved dipped-beam headlamp; use its approved E-Mark high-beam mode where required.
| Option | SKU |
|---|---|
| Linear-18 | VIFK-GOLF-01KL18 |
| Linear-18 Elite | VIFK-GOLF-01KL18E |
| Linear-18 Elite with Position Light | VIFK-GOLF-01KL18EPL |
| Linear-18 Elite i-LBA | VIFK-GOLF-01KL18ILBA |
Figures are for one Linear-18 lamp in the stated mode. A lux-distance is measured at the stated illumination threshold. i-LBA Boost output is separate from its approved E-Mark high beam.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| Vehicle / mounting arrangement | VW Golf (2017-2019) Bumper Beam Mounting Kit |
| Warranty | Five-year Lazer warranty, subject to terms |
| Lamp / mode (one lamp) | Raw output | Driver FOV output | Power | Current at 14.4 V | 1 lux reach | Horizontal spread | High-beam / position approval |
|---|---|---|---|---|---|---|---|
| Linear-18 Standard | 6,750 lm | 4,806 lm | 63 W | 4.4 A | 428 m | 56 degrees | R112 ref 30 |
| Linear-18 Elite (single E-mark) | 12,150 lm | 8,651 lm | 126 W | 8.8 A | 488 m | 64 degrees | R112 ref 45 |
| Linear-18 Elite with position light | 12,150 lm | 8,651 lm | 126 W | 8.8 A | 488 m | 64 degrees | R112 ref 45; white position light R7 |
| Linear-18 i-LBA Boost | 18,000 lm | 12,816 lm | 135 W | 10.4 A | 522 m | 60 degrees | Boost is not the approved road mode |
| Linear-18 i-LBA E-Mark | 5,538 lm | 3,943 lm | 43 W | 3.2 A | 286 m | 60 degrees | R112 ref 17.5 |
For Golf Mk7 2017-2019. The 3 mm mild-steel brackets have e-coat and satin-black protection. Fitting removes the bumper, drills 5 mm holes and secures each bracket with two rivets behind the lower grille. The installation requires a separate CAN high-beam interface; follow the Linear-18 mounting route in the guide.
Follow the exact vehicle fitting instructions for the mounting position, trimming, fixing holes and cable route. Have the lamps aimed together where a pair is fitted and test the switching before use.
The electrical connection needs the correct fused supply and high-beam trigger. A compatible CAN interface is a separate installation component where the vehicle does not provide the required conventional signal. Talk to us if you would like help choosing that connection.
Keep the lenses clean and check the fixings, cable protection and electrical connections during servicing. The quoted LED design life is not a guarantee of the complete installation's lifespan, and the warranty remains subject to its terms.
Use the approved operating mode for the exact selected lamp and a compliant installation. Boost output and functions such as amber position lighting, warning beacons or yellow off-road lighting have separate conditions.
This installation requires a compatible CAN high-beam interface. The interface is a separate component; follow the vehicle-specific guide for the connection.
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux describes useful light within 45 degrees either side and 10 degrees above and below the driver's view. A lux-distance figure states the illumination level at that distance, rather than how far every object can be seen.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
Some items need a delivery quote. You can buy the other items now.
Items needing a quote will be saved in this browser. Return to your basket to restore them and request a quote.Sign in to save your quote items to your account. Access them from any device.
These items are saved in this browser and are not in your checkout. Restore them to your basket when you are ready to request a quote.
Sign in to save your quote items to your account. Access them from any device.
