Lazer Isuzu D-Max (2017-2020) Triple-R or ST4 Lower Grille Mounting Kit

See more at night and keep the front end looking right

The drive in your Isuzu D-Max does not have to finish when the daylight does. This Lazer lighting kit gives you a clearer view ahead, with lamps positioned neatly at the front of the vehicle rather than a large exposed bar dominating its appearance.

Vehicle fitment

For D-Max 2017-2020.

A lighting upgrade you will enjoy using

A useful beam is about more than a bright spot in the distance. Light across the road edges and the surrounding ground helps you read bends, entrances and uneven terrain, while the selected lamp's long-range beam extends your view ahead.

The vehicle-specific mounting arrangement holds the lights in the intended position and gives the installer a secure way to aim them. The lamp choice and operating mode determine the output and approved use; a grille mount alone does not make every lamp function road approved.

Choose the light for your journeys

Choose the mounting-only option if you already have the matching lamps. It excludes lamps and wiring. The named lamp options add the selected lamps to the vehicle-specific mounting arrangement.

Choose Triple-R 750 Wide for a broader view across the road and nearby ground. Its 40-degree horizontal beam spreads light sideways, while Standard concentrates a narrower 19-degree beam further down the route.

Elite adds a wider 42-degree horizontal beam and more off-road illumination in Boost mode. It is useful when seeing the surrounding terrain matters as much as distance. Its approved lower-output E-Mark road mode is separate from the higher Boost figures.

The Standard position-light version adds white or amber position lighting. The stated road position-light approval applies to white only.

Beacon adds an amber warning-light function as well as its own high-beam specification. Choose it when you need that function; it is not the same lamp as plain Standard or Elite, and warning-light operation must suit the intended use.

ST4 Evolution favours useful all-round coverage, including vertical spread, for rural and off-road driving. It is a different beam choice from the more distance-focused Triple-R lamps; select the matching ST4 mounting option where a separate one is listed.

Options and part numbers

A useful all-round beam

The ST4 pair reaches 393 m at 1 lux, with a 40-degree horizontal and 25-degree vertical spread. That helps you see uneven ground and the surroundings as well as the route directly ahead.

A discreet lower-grille installation

The lamps mount directly to the bumper beam behind the lower grille, keeping the front of your D-Max tidy while adding useful light after dark.

Technical specifications

Lamp quantities and output modes are shown with the specifications. Boost figures are separate from approved lower-output road modes. Weight relates to the named lamps unless explicitly stated otherwise.

Fitting the bumper-beam mounts

Fitting requires bumper-fascia removal and drilling the bumper beam. The upper beam may need temporary removal to fit the rivnuts. For the ST4 arrangement, use the guide's 440 mm lamp-hole spacing and 40 mm rear offset.

Fitting your lights

For D-Max 2017-2020. The selected lamp pair mounts to the bumper beam behind the lower grille. The vehicle wiring kit is separate; choose it for the selected lamps and switching arrangement.

Fitting and high-beam connection

Follow the exact vehicle fitting instructions for the mounting position, trimming, fixing holes and cable route. Have the lamps aimed together where a pair is fitted and test the switching before use.

The electrical connection needs the correct fused supply and high-beam trigger. A compatible CAN interface is a separate installation component where the vehicle does not provide the required conventional signal. Talk to us if you would like help choosing that connection.

Looking after your lights

Keep the lenses clean and check the fixings, cable protection and electrical connections during servicing. The quoted LED design life is not a guarantee of the complete installation's lifespan, and the warranty remains subject to its terms.