Lazer Grille Light Kits for Toyota RAV4

Enjoy a clearer view in your RAV4 after dark

A discreet lighting upgrade can make a real difference on an unlit journey. These Lazer grille kits position the selected light neatly in your RAV4, with different mounts for Hybrid and Plug-In Hybrid models. Match the vehicle first, then choose the available lamp package.

A lighting upgrade you will enjoy using

A useful beam is about more than a bright spot in the distance. Light across the road edges and the surrounding ground helps you read bends, entrances and uneven terrain, while the selected lamp's long-range beam extends your view ahead.

The vehicle-specific mounting arrangement holds the lights in the intended position and gives the installer a secure way to aim them. The lamp choice and operating mode determine the output and approved use; a grille mount alone does not make every lamp function road approved.

A finish that suits the vehicle

The shaped mounts follow the vehicle's original front-end design. Strong, UV-stable material resists weather and chemicals, helping the installation stay neat through everyday use.

Use the supplied fixing method and the intended Lazer lamps. Where cutting guides are supplied, they help the installer make accurate openings; they do not remove the need to cut the original parts.

Choose your light kit

Choose your RAV4 Hybrid 2019+ or Plug-In Hybrid 2020+ first; they use different grille mounts. Then choose Linear-18 Standard, Elite, i-LBA or brackets only within that vehicle group. Complete lamp kits include the selected lamp and matching wiring; brackets only excludes both.

Choose the light for your journeys

Choose the mounting-only option if you already have the matching lamps. It excludes lamps and wiring. The named lamp options add the selected lamps to the vehicle-specific mounting arrangement.

Linear-18 gives you a slim bar with a broad view of the road. Standard has a lower electrical draw; Elite puts more light across the same discreet mounting position.

The i-LBA option adds Intelligent Low Beam Assist. After more than three seconds of high-beam use, it enters assist when the high beam is switched off, unless disabled with its separate switch. Its sensors respond to oncoming light and reflective signs, reducing the affected light zones. Lazer recommends mounting below 1 m for best sensor performance and keeping the lens clean. It is not an approved dipped-beam headlamp; use its approved E-Mark high-beam mode where required.

Vehicle, lamp packages and SKUs

Understanding the light figures

Figures are for one Linear-18 lamp in the stated mode. A lux-distance is measured at the stated illumination threshold. i-LBA Boost output is separate from its approved E-Mark high beam.

Light and installation details

Fitting and high-beam connection

Follow the exact vehicle fitting instructions for the mounting position, trimming, fixing holes and cable route. Have the lamps aimed together where a pair is fitted and test the switching before use.

The electrical connection needs the correct fused supply and high-beam trigger. A compatible CAN interface is a separate installation component where the vehicle does not provide the required conventional signal. Talk to us if you would like help choosing that connection.

Looking after your lights

Keep the lenses clean and check the fixings, cable protection and electrical connections during servicing. The quoted LED design life is not a guarantee of the complete installation's lifespan, and the warranty remains subject to its terms.

Need a hand choosing?

Tell us your exact vehicle, grille or roof arrangement and the light package you are considering. We can help you choose the matching parts.