Delivery, customs and taxes
Know the landed cost before you order
+
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Lead times and urgent orders
Check timing before you commit
+
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Fitment checked before you order
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
A good set of driving lights should give you a clearer view and look like it belongs on the truck. These Lazer grille kits offer an integrated upgrade for the listed RAM 1500 applications. Choose the correct vehicle and grille arrangement, then the available light package.
A lighting upgrade you will enjoy using
A useful beam is about more than a bright spot in the distance. Light across the road edges and the surrounding ground helps you read bends, entrances and uneven terrain, while the selected lamp's long-range beam extends your view ahead.
The vehicle-specific mounting arrangement holds the lights in the intended position and gives the installer a secure way to aim them. The lamp choice and operating mode determine the output and approved use; a grille mount alone does not make every lamp function road approved.
A finish that suits the vehicle
The shaped mounts follow the vehicle's original front-end design. Strong, UV-stable material resists weather and chemicals, helping the installation stay neat through everyday use.
Use the supplied fixing method and the intended Lazer lamps. Where cutting guides are supplied, they help the installer make accurate openings; they do not remove the need to cut the original parts.
Choose your light kit
Choose your RAM generation and trim first. DS Series Classic 2013-2018 uses Triple-R 750, while DT Series Limited 2019-2023 with the matching grille uses Linear-6. The DT kit is not specified for other DT trims. Choose a Triple-R beam/function package for the DS, or Standard/Elite Linear-6 for the DT Limited. Each mounting arrangement also has a Brackets Only option without lamps or wiring.
Choose your lights
Choose the mounting-only option if you already have the matching lamps. It excludes lamps and wiring. The named lamp options add the selected lamps to the vehicle-specific mounting arrangement.
Vehicle, lamp packages and SKUs
Vehicle / mounting kit
Light package
SKU
Vehicle and fitting requirements
1500 Classic / DS grille
Brackets Only
GM-R1500-01K
For RAM 1500 DS Series Classic 2013-2018.
1500 Classic / DS grille
Triple-R 750 Wide
GK-R1500-WIDE-01K.
For RAM 1500 DS Series Classic 2013-2018.
1500 Classic / DS grille
Triple-R 750 with Position Light
GK-R1500-01K
For RAM 1500 DS Series Classic 2013-2018.
1500 Classic / DS grille
Triple-R 750 Elite
GK-R1500-Elite-01K
For RAM 1500 DS Series Classic 2013-2018.
1500 Classic / DS grille
Triple-R 750 with Beacon
GK-R1500-BCN-01K
For RAM 1500 DS Series Classic 2013-2018.
1500 DT Limited grille
Brackets Only
GM-R1500-02K
For RAM 1500 DT Series Limited, 2019-2023 with the matching grille.
1500 DT Limited grille
Linear-6
GK-R1500-02K
For RAM 1500 DT Series Limited, 2019-2023 with the matching grille.
1500 DT Limited grille
Linear-6 Elite
GK-R1500-ELITE-02K
For RAM 1500 DT Series Limited, 2019-2023 with the matching grille.
Applies to: GM-R1500-01K, GK-R1500-WIDE-01K., GK-R1500-01K, GK-R1500-Elite-01K, GK-R1500-BCN-01K
See more at night and keep the front end looking right
The drive in your RAM 1500 Classic does not have to finish when the daylight does. This Lazer lighting kit gives you a clearer view ahead, with lamps positioned neatly at the front of the vehicle rather than a large exposed bar dominating its appearance.
Vehicle fitment
For RAM 1500 DS Series Classic 2013-2018.
Choose your lights
As a pair, Standard gives 9,240 raw lumens and 612 m at 1 lux, with a more concentrated 19-degree horizontal beam for distance.
Wide gives 9,240 raw lumens across a 40-degree horizontal beam, reaching 415 m at 1 lux. Choose it when seeing more of the nearby verges and surroundings matters more than maximum distance.
Elite combines a 42-degree horizontal spread with 10,136 raw lumens and 679 m at 1 lux in Boost mode. The lower-output E-Mark road mode has its own specification.
Beacon adds the amber warning function, with 10,800 raw lumens and 624 m at 1 lux in Boost. Its lower-output road high beam and warning patterns have separate approval conditions.
The Standard position-light version adds white or amber position lighting. The stated road position-light approval applies to white only.
Technical specifications
Lamp quantities and output modes are shown with the specifications. Boost figures are separate from approved lower-output road modes. Weight relates to the named lamps unless explicitly stated otherwise.
Full lamp packages: two selected Triple-R lamps, four mounting brackets with fasteners, cutting guides, two-lamp wiring and installation instructions. Brackets Only excludes lamps and wiring.
Specification
2x Triple-R 750 Elite (E-Boost Mode)
2x Triple-R 750 Wide
2x Triple-R 750
Voltage Range (DC)
10-32V
10-32V
10-32V
LED Life
50,000 hrs
50,000 hrs
50,000 hrs
High beam function
Total Luminous Flux
10136 Lm
9,240 lm
9240 Lm
Total Driver 'FOV' Flux
6680 Lm
5266 Lm
5572 Lm
Colour Temperature
5000K
5000K
5000K
Number of High Output LEDs
2 x 4
2 x 4
2 x 4
Power Consumption
104 Watts
88 Watts
88 Watts
Current Draw (at 14.4V)
7.2 Amps
6.2 Amps
6.2 Amps
Certification
High Beam
ECE R112
ECE R149
ECE R112
ECE Reference
N/A (12.5 x2 - E-Mark Mode)
20 x2
35 x2
Position Light (White only)
N/A
N/A
ECE R7
Photometric data
Horizontal Beam Angle
42°
40 degrees
19°
0.25 lx Line
1358m
829m
1225m
0.5 lx Line
960m
587m
866m
1 lx Line
679m
415m
612m
3 lx Line
392m
239m
354m
Beacon specification (pair)
Details
Measurement basis
Two Triple-R 750 Beacon lamps; Boost output unless a lower mode is specified
Voltage / LED design life
10-32 V DC; 50,000 hours
Raw output / driver FOV flux
10,800 lm / 2,484 lm
Colour temperature
5,000 K
Power / current
104 W; 7.4 A at 14.4 V
Connector per lamp
6-pin Superseal with 25 cm cable
Protection / testing
IP68; ECE R10 EMC; ISO 9227 salt spray; ISO 7637-2 load dump
High-beam approval
Low-output road mode only, ref 2x 10; ECE R149
Position light
White position-light approval only
Horizontal / vertical beam
28 / 16 degrees
Distance at 0.25 / 0.5 / 1 / 3 lux
1,249 / 883 / 624 / 361 m
Fitting your lights
For RAM 1500 DS Series Classic 2013-2018. This is not the later DT grille kit.
Frequently asked questions
Can I use the highest output on the road?
Use the approved operating mode for the exact selected lamp and a compliant installation. Boost output, amber position lighting and warning beacons have separate conditions.
Applies to: GM-R1500-02K, GK-R1500-02K, GK-R1500-ELITE-02K
See more at night and keep the front end looking right
The drive in your RAM 1500 does not have to finish when the daylight does. This Lazer lighting kit gives you a clearer view ahead, with lamps positioned neatly at the front of the vehicle rather than a large exposed bar dominating its appearance.
Vehicle fitment
For RAM 1500 DT Series Limited, 2019-2023 with the matching grille.
Choose the light for your journeys
Standard draws less power; Elite gives a broader beam and 8,100 raw lumens per pair, compared with Standard's 4,500. Both use the same compact mounting format.
Technical specifications
Output, power and current in the pair comparison are for TWO lamps. The 1 lux distances are measured pair figures, not individual-lamp distances multiplied by two. Lamp grade and mode determine road approval.
Specification
Details
Brand
Lazer Lamps
Vehicle / mounting arrangement
RAM 1500 DT Limited 2019-2023 with the matching grille; not other DT trims or DS Classic
Lighting detail
Bespoke vehicle integration kit for Lazer LED Spotlight installation
Specification
Custom fit for RAM 1500 (2019-2023)
Lighting detail
Designed for use with Linear-6 High Performance LED Spotlights
Electrical detail
Kit also includes bespoke mounting brackets and two-lamp wiring kit
Construction
Brackets made from high strength, UV -stable, ASA material
100 ms for Standard and Elite; match delays when combining different lamp types
Lamp-pair weight
0.99 kg, excluding vehicle mounts and wiring
Complete lamp packages
Two selected lamps; four mounting brackets; cutting guides and two-lamp wiring. Brackets Only excludes lamps and wiring
Colour temperature
5,000 K
Pair / mode
Raw lm
Driver FOV lm
W
A at 14.4 V
H / V degrees
Approval
Two Standard lamps
4,500
3,204
42
2.92
56/13
R112 ref2x12.5
Two Elite lamps
8,100
5,767
84
5.8
64/15
R112 ref2x17.5
Pair / mode
0.25 lux m
0.5 lux m
1 lux m
3 lux m
Two Standard lamps
698
494
349
202
Two Elite lamps
796
563
398
230
Installation details
Fitting requires cutting and drilling the grille to the vehicle-specific guide, with its specified fixings and thread sealant.
Fitting your lights
Check that your truck is a DT Limited with the matching grille; this kit is not specified for other DT trims or the DS Classic.
Frequently asked questions
Can I use the highest output on the road?
These selected lamps have the road high-beam approval and reference shown for their exact specification. Wire them for compliant high-beam switching and aim them correctly. They do not add yellow or warning-beacon modes.
Fitting and high-beam connection
Follow the exact vehicle fitting instructions for the mounting position, trimming, fixing holes and cable route. Have the lamps aimed together where a pair is fitted and test the switching before use.
The electrical connection needs the correct fused supply and high-beam trigger. A compatible CAN interface is a separate installation component where the vehicle does not provide the required conventional signal. Talk to us if you would like help choosing that connection.
Looking after your lights
Keep the lenses clean and check the fixings, cable protection and electrical connections during servicing. The quoted LED design life is not a guarantee of the complete installation's lifespan, and the warranty remains subject to its terms.
It supplies the mounting arrangement without lamps or wiring. Select the appropriate named lamp package if you need the lamps as well.
Will it switch with my high beams?
The installation needs a usable high-beam signal. Where the vehicle does not provide one, a compatible separate CAN interface is needed. Test the actual signal rather than assuming every LED-headlight vehicle uses the same connection.
What is the difference between lumens and lux distance?
Raw lumens describe the light generated by the LEDs. Driver field-of-view flux describes useful light within 45 degrees either side and 10 degrees above and below the driver's view. A lux-distance figure states the illumination level at that distance, rather than how far every object can be seen.
Delivery, customs and taxes
Know the landed cost before you order
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Lead times and urgent orders
Check timing before you commit
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Fitment first
Check fit before you order
Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.
Check vehicle fitment
Need help with this product?
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.