Available to Order
Need help checking the dimensions or connections? →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Check the stated dimensions, connections and installation requirements before ordering. Contact us if you need help choosing the part.
An extension with the right connector lets you finish the installation neatly, with a sensible cable route and the connections where you need them. These Lazer extensions cover specific lamp, power and function arrangements. Choosing the electrical connection matters just as much as the extra length.
Match the connector and supported lamp/function first, then the length and pack quantity. The high-power two-pin Econoseal connection is different from the low-power two-pin Superseal connection. A low-power extension without position-light connections does not add that function.
| Connection | Length / pack | SKU |
|---|---|---|
| Triple-R Beacon - 6-pin Superseal | 3 m - single | 8213-6C |
| Position light - 3-pin Superseal | 2 m - twin pack | 8213-DEF-3C |
| High power - 2-pin Econoseal | 3 m - single | 8212 |
| Position light - 3-pin Superseal | 3 m - single | 8213-3C |
| Low power - 2-pin Superseal | 3 m - single | 8213-2C |
Applies to: 8213-6C
Use the six-pin extension when a compatible Beacon installation needs more cable reach. It preserves the intended multi-function connection while giving the installer more freedom over the lamp position and route.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8213-6C |
| Dimensions / routing | 3m cable extension |
| Connections | Includes 6-pin TE Superseal connectors |
| Specification | Suitable for Triple-R Beacon products |
| Electrical detail | Compatible with Lazer Beacon Wiring Kit (12V) |
| Compatible lamps / system | Triple-R 1000 Beacon; connector and function must match |
| Key specification / supplied configuration | 3 m six-pin TE extension for compatible Triple-R 1000 Beacon; IP68 connector. A fused relay harness is separate |
| Extension connectors | IP68 connectors at both ends; the complete vehicle wiring installation is not assigned that rating |
Applies to: 8213-DEF-3C
The twin extension pack helps route compatible three-pin position-light wiring to both sides of the installation. It gives the extra reach without changing the intended connector or lamp functions.
The flat cable can fit behind suitable trim, including the roof-element gap on an L663 Defender fitted with matching Lazer roof pods. Some vehicles also allow an A-pillar or windscreen route. Check the clearance and secure the cable; a flat extension does not guarantee a no-drill installation.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8213-DEF-3C |
| Dimensions / routing | 2x 2m flat cable extension |
| Connections | Includes 3-pin TE Superseal Connectors |
| Specification | Compatible with 3 core Low Power Wiring Kits |
| Specification | Linear-12 Elite with PL |
| Specification | Linear-18 Elite with PL |
| Specification | Triple-R 750 Standard |
| Specification | Triple-R 850 Standard |
| Specification | Triple-R 1000 Standard |
| Specification | Sentinel with PL |
| Key specification / supplied configuration | Two 2 m three-core extensions; 7.2 x 3.6 mm flat cable; three-pin IP68 connectors for compatible position-light roof-pod arrangements |
| Extension connectors | IP68 connectors at both ends; the complete vehicle wiring installation is not assigned that rating |
No. Lamps are sold separately; this supplies the extension cable.
Also supports Triple-R 1250 with the matching three-pin position-light connection.
Applies to: 8212
Use the specified high-power extension when the lamp position needs more cable reach. The correct connector and cable rating help preserve the electrical arrangement required by the lamp.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8212 |
| Dimensions / routing | 3m cable extension |
| Protection / testing | Includes IP68 Connectors |
| Electrical detail | Compatible with Single-Lamp Wiring Kit (High Power, 12V) |
| Specification | T-16 Evolution |
| Specification | T-24 Evolution |
| Specification | T-28 Evolution |
| Compatible lamps / system | T-16 Evolution; T-24 Evolution; T-28 Evolution; Triple-R 16 Elite; Triple-R 24 Elite; Triple-R 28 Elite; connector and function must match |
| Extension connectors | IP68 connectors at both ends; the complete vehicle wiring installation is not assigned that rating |
Two-pin Econoseal high-power extension. Compatible T-16/T-24/T-28 Evolution and Triple-R 16/24/28 Elite models are listed; Linear-48 is excluded.
Applies to: 8213-3C
The three-pin extension gives a compatible position-light lamp more cable reach while keeping its intended connection. It is useful when the final mounting point is further from the harness than expected.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8213-3C |
| Dimensions / routing | 3m cable extension |
| Connections | Includes 3-pin TE Superseal connectors |
| Electrical detail | Compatible with any Wiring Kit (Position Light, 12V) |
| Compatible lamps / system | Triple-R 750; Triple-R 850; Triple-R 1000; Triple-R 1250; Linear-12 Elite (with Position Light); Linear-18 Elite (with Position Light); Sentinel 7'' Elite; Sentinel 9''; Sentinel 9'' Chrome; Sentinel 9'' Elite (with Position Light); connector and function must match |
| Extension connectors | IP68 connectors at both ends; the complete vehicle wiring installation is not assigned that rating |
Use the three-pin position-light extension only with the compatible lamp, function and harness. E-mark approval alone does not establish connector compatibility.
Applies to: 8213-2C
The low-power two-pin extension gives a compatible installation more cable reach. It helps you keep the wiring route neat without cutting and joining a short original lead unnecessarily.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8213-2C |
| Dimensions / routing | 3m Cable Extension |
| Protection / testing | Includes IP68 Connectors |
| Compatible lamps / system | ST Evolution (All Products); Triple-R 750 Elite (Gen2); Triple-R 850 Elite (Gen2); Triple-R 1000 Elite (Gen2); Linear-6 (Std / Elite); Linear-12 (Std / Elite); Linear-18 (Std / Elite); Linear-36; Linear-42; Linear-48; Sentinel 7'' without PL; Sentinel 9'' Elite without PL; connector and function must match |
| Key specification / supplied configuration | 3 m two-pin low-power extension; IP68 connector; supported lamp list and load limit apply |
| Extension connectors | IP68 connectors at both ends; the complete vehicle wiring installation is not assigned that rating |
| Cable / connector | Flat 3 m extension; two-pin Superseal connectors |
The low-power 8213-2C extension has no position-light connection. Its named Sentinel applications are the versions without position lighting; it is not compatible with Linear lamps equipped with position lights.
Also supports Linear-24 Elite with the matching two-pin Superseal connection and no position-light connection.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
Route the cable away from heat, moving parts and sharp edges, and keep the supply and control connections separate as the instructions require. A high-beam trigger controls the relay; it should not be used as the full lamp-power supply.
Follow the exact fitting instructions for the component and lamp. Talk to us if you would like help matching it to the installation before ordering.
Tell us the lamp or equipment you are using and how you want to fit it. We can help you choose the matching parts.
No. Match the supported lamp, connector functions, voltage and electrical limits. The total demand of multiple lamps matters as well as the rating of one lamp.
Applies to: 8212, 8213-2C, 8213-3C, 8213-6C
No. Lamps are sold separately; this supplies the extension cable.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Some items need a delivery quote. You can buy the other items now.
Items needing a quote will be saved in this browser. Return to your basket to restore them and request a quote.Sign in to save your quote items to your account. Access them from any device.
These items are saved in this browser and are not in your checkout. Restore them to your basket when you are ready to request a quote.
Sign in to save your quote items to your account. Access them from any device.
