Protect the front of your light when it is not in use
A matching black cover is a straightforward way to protect the front of the specified Lazer lamp when it is not operating. Choose the cover for the actual lamp family and fit, so it sits properly rather than relying on a similar-looking shape.
Match the lens to the lamp
Use the exact lamp family, size and orientation supported by this accessory. A physically similar lamp or a tight grille installation may need a different lens or may not have room for a cover.
Choose the right parts
Choose the named Triple-R 750 or ST/T Evolution cover. Check the exact lamp compatibility and use instructions; a cover is a separate accessory and does not change the light's own specification.
Options and SKUs
| Lamp compatibility |
SKU |
| Triple-R 750 |
LC-00R4 |
| ST/T Evolution |
LC-0004-B |
Specifications, contents and practical details
Triple-R 750 Lens Cover
Applies to: LC-00R4
Protect your Triple-R 750 when it is switched off
The black clip-on cover adds a protective layer over the lens when the lamp is not in use. It is useful for keeping the light covered between outings and gives the front of the lamp a neat Lazer finish.
Technical specifications
| Specification |
Details |
| Brand |
Lazer Lamps |
| SKU |
LC-00R4 |
| Lighting detail |
Lens cover designed for Triple-R 750 high performance LED spotlights |
| Construction |
Lazer logo design printed onto black acrylic material |
| Supplied detail |
Come supplied with 4x clips |
Match the lamp generation
This cover does not fit Triple-R Gen 1 lamps without modification. The acrylic cover uses four retaining clips. Remove it before switching on the lamp.
ST/T Evolution Lens Cover
Applies to: LC-0004-B
Cover your ST/T lamp when it is not in use
The black cover gives a compatible ST/T Evolution lamp an extra protective layer between uses. It clips into place for a tidy finish and removes when you want to use the lamp.
Technical specifications
| Specification |
Details |
| Brand |
Lazer Lamps |
| SKU |
LC-0004-B |
| Lighting detail |
Lens cover designed for ST Evolution high performance LED spotlights |
| Construction |
Lazer logo design printed onto black acrylic material |
| Supplied detail |
Come supplied with 4x clips |
Fitting and use
Remove the cover before switching on the lamp. These protective covers are for use while the light is off.
Fitting and support
Follow the exact fitting instructions for the component and lamp. Talk to us if you would like help matching it to the installation before ordering.
Looking after your lights
Keep the lamp and accessory clean, fit the supplied retaining parts correctly and check that the cover or lens is secure before use.
Need a hand choosing?
Tell us the lamp or equipment you are using and how you want to fit it. We can help you choose the matching parts.
Frequently asked questions
Does this include the lamp?
No. The lamp is sold separately; this supplies the matching lens or cover.
Can I use it in any grille installation?
The lamp must be compatible and the mounting must leave sufficient room. Some integrated vehicle kits cannot use lens covers; check the exact kit rather than assuming the lamp family alone is enough.
Can I leave the cover on while the light is on?
No. Remove the protective cover before switching on the lamp. Refit it when the lamp is off.