Available to Order
Need help checking the dimensions or connections? →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Check the stated dimensions, connections and installation requirements before ordering. Contact us if you need help choosing the part.
A matched wiring kit helps you get the controls and electrical connections right, with a neater result than piecing together an unsuitable loom. This range covers specific Lazer lamp counts, connectors and functions, so you can choose the harness for the lights you are actually fitting.
Identify the exact lamp and functions, then match the connector, supported lamp count, electrical rating and cable arrangement. A kit for ordinary high beam is not automatically a position-light or beacon harness. Check the compatible lamp list and any extra control requirements for the harness you choose.
| Connection / function | Lamp count / cable | SKU |
|---|---|---|
| Beacon - 6-pin Superseal | Two lamps - 3.5 m | 2L-LP-6C-350 |
| Beacon - 6-pin Superseal | Two lamps - 1.2 m | 2L-LP-6C-120 |
| Utility - 2-pin Deutsch | Two lamps - 6.5 m | 2L-UT-650 |
| Low power - 2-pin Superseal | Four lamps - splice, 1.5 / 6.5 m | 8230-12V-SP |
| High power - 2-pin Econoseal | One lamp - 3 m | 1L-HP-300 |
| Linear-6 Elite+ - momentary switch | Two lamps - 1.2 m | 2L-LP-EP-120 |
| Low power - 2-pin Superseal | Two lamps - long 3.2 m | 2L-LP-320 |
| Position light - 3-pin Superseal | Two lamps - 1.2 m | 2L-LP-PL-120 |
| Linear-6 Elite+ - momentary switch | One lamp - 1.2 m | 1L-LP-EP-120 |
| Low power - 2-pin Superseal | One lamp - 1.2 m | 1L-LP-120 |
| Position light - 3-pin Superseal | One lamp - 1.2 m | 1L-LP-PL-120 |
| Utility - 2-pin Deutsch | One lamp - 5 m | 1L-UT-500 |
| Low power - 2-pin Superseal | Two lamps - 1.2 m | 2L-LP-120 |
| 4-pin Deutsch DT | One lamp - 2 m | 1L-DT4-200 |
Applies to: 2L-LP-6C-350
Connect two compatible Triple-R Beacon lamps with a loom made for their high-beam, position and warning-light functions. The six-pin arrangement keeps those separate circuits together and gives your installer a more straightforward route than building an improvised loom.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-6C-350 |
| Electrical detail | Two-Lamp Wiring Kit for Lazer products with integrated Position Light and Beacon function |
| Dimensions / routing | 3.5 m cable lengths |
| Electrical detail | Includes 12 V relay and 30 amp fuse |
| Connections | Superseal connections |
| Lighting detail | High beam trigger wire allows for operation of lights in parallel with standard high beams |
| Dimensions / routing | Conduit cable sections for added protection in engine bay |
| Specification | Triple-R 1000 with Beacon (Gen2) |
| Compatible lamps | For two Triple-R 1000 Beacon lamps; lamps are separate |
| Lamp-cable length | 3.5 m per lamp |
| Relay /fuse | 12 V relay; 30 A fuse |
| Lamp connections | Six-pin Superseal |
Applies to: 2L-LP-6C-120
This two-lamp loom supports the separate circuits of compatible Beacon lamps, keeping the high-beam, position and warning-light connections organised. Choose it for the required cable reach and six-pin lamp connection.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-6C-120 |
| Specification | Triple-R 750 Beacon |
| Specification | Triple-R 1000 Beacon |
| Specification | Air-55 Beacon |
| Specification | Air-90 Beacon |
| Electrical detail | Two-Lamp Wiring Kit for Lazer products with integrated Position Light and Beacon function |
| Electrical detail | Includes 12 V relay and 30 amp fuse |
| Connections | Superseal connections |
| Lighting detail | High beam trigger wire allows for operation of lights in parallel with standard high beams |
| Dimensions / routing | Conduit cable sections for added protection in engine bay |
| Cable length | 1.2 m per lamp connection |
| Compatible Beacon lamps | Triple-R 750 Beacon, Triple-R 1000 Beacon, AIR-55 Beacon and AIR-90 Beacon; six-pin function must match |
| Compatible lamps | For two compatible Triple-R 750 Beacon, Triple-R 1000 Beacon, AIR-55 Beacon or AIR-90 Beacon lamps; lamps are separate |
| Lamp-cable length | 1.2 m per lamp |
| Relay /fuse | 12 V relay; 30 A fuse |
| Lamp connections | Six-pin Superseal |
Applies to: 2L-UT-650
A purpose-designed two-lamp harness makes it easier to position compatible Utility lights where they are useful and protect their electrical supply. The relay, fuse and lamp connections form part of a properly planned installation.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-UT-650 |
| Electrical detail | Two-Lamp Wiring Kit for Utility Series work lamps |
| Connections | 2-pin deutsch connections |
| Supplied detail | Includes on/off switch for independent operation |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Specification | Supported Carbon-2 versions with a two-pin Deutsch DT connection; confirm the exact lamp and harness revision and rated load. |
| Lamp-cable length | 6.5 m; two supported two-pin Deutsch DT work lamps |
| Cable / fuse revision | Match the supplied harness label and instructions; lamps and vehicle supply must remain within its rated load |
| Supported common lamp configurations | Standard two-pin Linear Flood, Utility-25, Utility-25 MAXX, Utility-45, Utility-50, fixed-output Utility-80 HD and RP Spot; exact lamp draw must suit the supplied harness rating. |
| Relay-holder protection | IP53 only when mounted vertically upright |
Applies to: 8230-12V-SP
A four-lamp installation needs a loom designed around all four lamps, not a chain of improvised splitters. This harness provides the required front and longer cable routes for its specified low-power lighting arrangement.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 8230-12V-SP |
| Electrical detail | Four-Lamp Wiring Kit for Lazer E-mark approved driving lights (not with PL function) |
| Dimensions / routing | 1.5 m / 6.5 m cable lengths |
| Electrical detail | Includes 12 V relay and 35 amp fuse |
| Connections | 2-pin Superseal connections |
| Lighting detail | Allows for operation of lights in parallel with standard high beam lights |
| Dimensions / routing | Conduit cable sections for added protection within engine bay |
| Excluded pairs / lamps | Triple-R 1250 and Linear-18 Elite are not supported on this four-lamp harness |
| Four-lamp combination | Two Triple-R 1000, ST8 or Linear-12 Elite lamps plus two Triple-R 750, ST4 or Linear-6 Elite lamps; only compatible two-pin versions without position-light supply |
| Relay-holder protection | IP53 only when mounted vertically upright |
Applies to: 1L-HP-300
A high-output light needs a wiring harness matched to its electrical demand. This single-lamp loom gives your installer the appropriate relay, fuse, cable route and connector arrangement for the specified compatible lamps.
Use the supported lamp, connector and electrical rating for this loom. A matching plug alone does not establish that the lamp is within the harness load limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-HP-300 |
| Electrical detail | For one lamp from the supported list below |
| Dimensions / routing | 3 m cable length |
| Electrical detail | Includes 12 V relay and 35 amp fuse |
| Supplied detail | Includes on/off switch for independent operation |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Relay-holder protection | IP53 only when mounted vertically upright |
| Lamp connector | Two-pin Econoseal |
| Supported lamps | T16/T24/T28 Evolution, Triple-R 16/24/28 Elite and Triple-R 1250 Elite+; Linear-48 excluded |
For one compatible high-power lamp: 3 m loom, 12 V relay, 35 A fuse, on/off switch and two-pin Econoseal connection. Compatible Triple-R 16/24/28 Elite lamps normally include this harness when new, so check your existing package before buying a duplicate. Linear-48 is excluded.
No. Lamps are sold separately; this supplies the wiring harness.
The 1L-HP-300 harness also supports one Triple-R 1250 Elite+ lamp.
Applies to: 2L-LP-EP-120
The momentary switch gives you the input needed to select functions on compatible three-pin lamps. The two-lamp loom keeps the supply and control installation together, rather than adding an unsuitable on/off switch to a mode-selecting lamp.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-EP-120 |
| Electrical detail | Two-Lamp Wiring Kit for Linear-6 Elite+ High Performance LED Lights |
| Dimensions / routing | 1.2m cable lengths |
| Electrical detail | Includes 12V relay and 30 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Supplied detail | Includes momentary switch for easy operation of light modes |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Relay-holder protection | IP53 only when mounted vertically upright |
For two Linear-6 Elite+ lamps: 1.2 m lamp cables, three-pin Superseal connections, 12 V relay and 30 A fuse, with the specified momentary mode switch.
Applies to: 2L-LP-320
The longer two-lamp harness is useful when the lamps sit further from the battery or relay. A purpose-made loom gives you the reach and protected routing without relying on an improvised extension at every joint.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-320 |
| Electrical detail | Two-Lamp Wiring Kit for Lazer E-mark approved driving lights |
| Dimensions / routing | 3.2 m cable lengths |
| Dimensions / routing | Flat cable profile facilitates installation inside/along vehicle trim panels |
| Electrical detail | Includes 12 V relay and 35 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Relay-holder protection | IP53 only when mounted vertically upright |
| Supported lamps | ST Evolution; Triple-R 750/850/1000 Elite; Linear-6 and Linear-12 Standard/Elite; Linear-18 Standard; Sentinel 7-inch; compatible two-pin Superseal versions |
| Lamp connector | Two-pin Superseal |
Not suitable for a pair of Linear-18 Elite or a pair of Sentinel 9 Elite lamps. Those pairs require the specified 2L-MP-120 mid-power harness. This long loom has 3.2 m lamp cables.
Applies to: 2L-LP-PL-120
This loom supports the separate high-beam and position-light circuits of compatible lamps. It keeps the installation organised and gives your fitter the matching connections for the functions you want to use.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-PL-120 |
| Electrical detail | Two-Lamp Wiring Kit for Lazer products with integrated Position Light function |
| Dimensions / routing | 1.2 m cable lengths |
| Electrical detail | Includes 12 V relay and 30 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Relay-holder protection | IP53 only when mounted vertically upright |
| Supported lamps | AIR-55/AIR-90; Triple-R 750/850/1000; Linear-12 Elite with position light; Sentinel 7 Elite and Sentinel 9 Standard/Chrome; compatible position-light versions |
| Lamp connector | Three-pin Superseal |
Not suitable for pairs of Triple-R 1250 with position light, Linear-18 Elite with position light, or Sentinel 9 Elite with position light. Those pairs require the specified 2L-MP-PL-120 harness.
Applies to: 1L-LP-EP-120
A momentary-switch loom is the right starting point for a lamp that changes functions through a momentary input. It supplies one compatible three-pin lamp while keeping the control separate from a simple permanent on/off feed.
Use the supported lamp, connector and electrical rating for this loom. A matching plug alone does not establish that the lamp is within the harness load limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-LP-EP-120 |
| Electrical detail | One-Lamp Wiring Kit for Linear-6 Elite+ LED High Performance Lights |
| Dimensions / routing | 1.2m cable length |
| Electrical detail | Includes 12V relay and 30 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Supplied detail | Includes Momentary switch for easy operation of the light modes |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Relay-holder protection | IP53 only when mounted vertically upright |
For one Linear-6 Elite+ lamp: 1.2 m cable, three-pin Superseal, 12 V relay, 30 A fuse and the specified momentary mode switch.
Applies to: 1L-LP-120
A properly matched loom gives your lamp a fused supply and a tidy route to the switch and high-beam trigger. This single-lamp low-power harness is a straightforward way to make the electrical installation as considered as the lamp itself.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-LP-120 |
| Electrical detail | One-Lamp Wiring Kit for Lazer E-mark approved driving lights |
| Dimensions / routing | 1.2m cable length |
| Electrical detail | Includes 12V relay and 20 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Compatible lamps / system | Glide; Glide Elite; ST Evolution (All Products); Triple-R 750 Elite (Gen2); Triple-R 850 Elite (Gen2); Triple-R 1000 Elite (Gen2); Linear-6 (Std / Elite); Linear-12 (Std / Elite); Linear-18 (Std / Elite); Linear-24 Elite; Linear-36; Linear-42; Linear-48; Sentinel 7''; Sentinel 9'' Elite; connector and function must match |
| Key specification / supplied configuration | For one supported lamp; 1.2 m cable; 12 V relay; 20 A fuse; two-pin Superseal; on/off switch |
| Battery connection | Battery terminal supplied |
Applies to: 1L-LP-PL-120
This single-lamp loom supports a compatible lamp with a separate position-light function. It gives the installer the correct circuits for the lamp rather than leaving the extra function unused or joining it into the high-beam feed.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-LP-PL-120 |
| Electrical detail | One-Lamp Wiring Kit for Lazer products with integrated Position Light function |
| Dimensions / routing | 1.2m cable length |
| Electrical detail | Includes 12V relay and 20 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Compatible lamps / system | Air-55; Air-90; Air-130 Elite; Glide (with Position Light); Glide Elite (with Position Light); Triple-R 750 (Gen2); Triple-R 850 (Gen2); Triple-R 1000 (Gen2); Triple-R 1250 (Gen2); Linear-12 Elite (with Position Light); Linear-18 Elite (with Position Light); Sentinel 7'' Elite; Sentinel 9''; Sentinel 9'' Chrome; Sentinel 9'' Highline (with Position Light); Sentinel 9'' Elite (with Position Light); connector and function must match |
| Key specification / supplied configuration | For one supported position-light lamp; 1.2 m cable; 12 V relay; 20 A fuse; three-pin connection |
| Battery connection | Battery terminal supplied |
| Relay-holder protection | IP53 only when mounted vertically upright |
Applies to: 1L-UT-500
A dedicated Utility-series harness gives you the cable route, relay and fused supply for a compatible single work light. It helps turn the lamp into a useful working installation rather than an accessory that still needs an improvised loom.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-UT-500 |
| Electrical detail | One-Lamp Wiring Kit for Utility Series work lamps |
| Dimensions / routing | 5m cable lengths |
| Electrical detail | Includes 12V relay and 10 amp fuse |
| Connections | Deutsch connection |
| Supplied detail | Includes on/off switch for independent operation |
| Dimensions / routing | Conduit cable sections for added protection in engine bay |
| Compatible lamps / system | Linear Flood; Utility-25; Utility-25 MAXX; Utility-45; Utility-50; Utility-80 HD (Heavy Duty); RP Spot; connector and function must match |
| Key specification / supplied configuration | For one compatible work lamp; 5 m cable; 12 V relay; 10 A fuse; two-pin Deutsch DT |
| Battery connection | Battery terminal supplied |
| Relay-holder protection | IP53 only when mounted vertically upright |
Applies to: 2L-LP-120
A matching two-lamp loom keeps the supply, relay and lamp connections organised. It is a useful part of getting a secure, reliable lighting installation, with the correct harness chosen for both lamps together.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 2L-LP-120 |
| Electrical detail | Two-Lamp Wiring Kit for Lazer E-mark approved driving lights |
| Dimensions / routing | 1.2m cable lengths |
| Electrical detail | Includes 12V relay and 35 amp fuse |
| Connections | Superseal connections |
| Supplied detail | Includes optional on/off switch for independent operation of high beam |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Compatible lamps / system | ST Evolution (All Products); Triple-R 750 Elite (Gen2); Triple-R 850 Elite (Gen2); Triple-R 1000 Elite (Gen2); Linear-6 (Std / Elite); Linear-12 (Std / Elite); Linear-18 (Std only); Sentinel 7''; connector and function must match |
| Key specification / supplied configuration | For two supported low-power lamps; 1.2 m lamp cables; 12 V relay; 35 A fuse; two-pin connections |
| Battery connection | Battery terminal supplied |
| Relay-holder protection | IP53 only when mounted vertically upright |
Not suitable for a pair of Linear-18 Elite or a pair of Sentinel 9 Elite lamps. Use the specified 2L-MP-120 mid-power harness for those pairs.
Applies to: 1L-DT4-200
A matching harness makes it easier to wire the lamp's intended functions and protect the supply. This single-lamp kit uses the specified four-pin Deutsch DT connection rather than a generic two-wire feed.
Use the exact compatible lamps, connector and cable rating for this loom or adapter. A matching plug does not by itself prove that a pair of lamps is within the harness's electrical limit.
| Specification | Details |
|---|---|
| Brand | Lazer Lamps |
| SKU | 1L-DT4-200 |
| Electrical detail | Single-Lamp Wiring Kit for Lazer Lamps High performance LED spotlights (see product text for compatibility) |
| Dimensions / routing | 2m cable lengths |
| Electrical detail | Includes 12V relay and 25 amp fuse |
| Connections | Deutsch DT06-4S connections |
| Supplied detail | Includes on/off switch for independent operation of lights |
| Dimensions / routing | Braided cable sections for added protection in engine bay |
| Compatible lamps / system | Carbon-2 (Spot / Drive); Carbon-4 (Spot / Drive); Carbon-6 (Spot / Drive); RP Hyperspot; Utility-50 with Beacon; Utility-50 with Red Tail Light; Utility-80 HD with Variable Brightness; connector and function must match |
| Battery connection | Battery terminal supplied |
| Relay-holder protection | IP53 only when mounted vertically upright |
For one compatible four-pin Deutsch DT lamp: 2 m cable, 12 V relay and 25 A fuse. The included on/off switch is not the up/down brightness controller needed for the Utility-80 HD Variable Brightness function.
Each wiring kit includes a battery terminal.
Route the cable away from heat, moving parts and sharp edges, and keep the supply and control connections separate as the instructions require. A high-beam trigger controls the relay; it should not be used as the full lamp-power supply.
Follow the exact fitting instructions for the component and lamp. Talk to us if you would like help matching it to the installation before ordering.
Tell us the lamp or equipment you are using and how you want to fit it. We can help you choose the matching parts.
Applies to: 1L-DT4-200, 1L-LP-120, 1L-LP-PL-120, 1L-UT-500, 2L-LP-120, 2L-LP-320, 2L-LP-6C-120, 2L-LP-6C-350, 2L-LP-EP-120, 2L-LP-PL-120, 2L-UT-650, 8230-12V-SP
No. Match the supported lamp, connector functions, voltage and electrical limits. The total demand of multiple lamps matters as well as the rating of one lamp.
Applies to: 1L-DT4-200, 1L-LP-120, 1L-LP-EP-120, 1L-LP-PL-120, 1L-UT-500, 2L-LP-120, 2L-LP-320, 2L-LP-6C-120, 2L-LP-6C-350, 2L-LP-EP-120, 2L-LP-PL-120, 2L-UT-650, 8230-12V-SP
No. Lamps are sold separately; this supplies the wiring harness.
Applies to: 1L-HP-300, 1L-LP-EP-120
No. Match the supported single lamp, connector functions, voltage and electrical load to this harness.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Some items need a delivery quote. You can buy the other items now.
Items needing a quote will be saved in this browser. Return to your basket to restore them and request a quote.Sign in to save your quote items to your account. Access them from any device.
These items are saved in this browser and are not in your checkout. Restore them to your basket when you are ready to request a quote.
Sign in to save your quote items to your account. Access them from any device.
