Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
The HEL Performance abrasion sleeving has been designed and manufactured to offer ultimate safeguarding for fuel lines, coolant hoses, wiring looms and other critical components against abrasion in the motorsport and automotive industry. Even in the harshest conditions, this sleeving guards against abrasion, chafing, and continuous contact, all while enduring engine vibrations and challenging environments.
Installing our abrasion sleeving is a breeze. Simply apply heat using a heat gun, allowing the sleeve to contract tightly around your hoses and wiring looms, creating a snug and secure fit. For optimal results, maintain a recommended distance of approximately 50mm (2") from the outside of the sleeving while evenly covering its length. Our sleeving features a low shrink temperature of 110°C (230°F), making it suitable for fragile and heat-sensitive components.
Featuring a 2:1 shrink ratio, our sleeve reduces to half of its original diameter when exposed to the appropriate heat. For instance, if the internal diameter of the sleeve starts at 20mm (0.78"), it will shrink down to 10mm (0.39") once heated.
Prior to installation, our abrasion sleeving can be easily trimmed with scissors or a sharp blade. It's important to note that our sleeving is non-adhesive, so if you need to remove any sleeving that has been heat-shrunk onto a component, carefully make a precise lengthwise incision along the sleeving using a sharp blade. Be mindful not to damage the underlying components. Once the incision is made, you can gently peel away the sleeving.
Please note that our abrasion sleeving is sold by the meter and will be provided in an uncut length of up to 20 meters in total. Should you require more than 20 meters, please don't hesitate to contact us for further assistance.
| Supplier SKU | Configuration | Specifications |
|---|---|---|
| ABR-SLV-10 | HEL Abrasion Resistant Heat Shrink Sleeve 10mm Inside Diameter (5mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 10mm / 0.39"; Sleeve Internal Diameter (Shrunk): 5mm / 0.20"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
| ABR-SLV-20 | HEL Abrasion Resistant Heat Shrink Sleeve 20mm Inside Diameter (10mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 20mm / 0.78"; Sleeve Internal Diameter (Shrunk): 10mm / 0.39"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
| ABR-SLV-26 | HEL Abrasion Resistant Heat Shrink Sleeve 26mm Inside Diameter (13mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 26mm / 1.02"; Sleeve Internal Diameter (Shrunk): 13mm / 0.51"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
| ABR-SLV-30 | HEL Abrasion Resistant Heat Shrink Sleeve 30mm Inside Diameter (15mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 30mm / 1.18"; Sleeve Internal Diameter (Shrunk): 15mm / 0.59"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
| ABR-SLV-35 | HEL Abrasion Resistant Heat Shrink Sleeve 35mm Inside Diameter (17.5mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 35mm / 1.37"; Sleeve Internal Diameter (Shrunk): 17.5mm / 0.68"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
| ABR-SLV-40 | HEL Abrasion Resistant Heat Shrink Sleeve 40mm Inside Diameter (20mm Shrunk) | Protection Type: Abrasion Sleeving; Sleeve Internal Diameter (Pre-Shrunk): 40mm / 1.57"; Sleeve Internal Diameter (Shrunk): 20mm / 0.78"; Operating Temperature Range: -40°C - 125°C / -40°F - 257°F; Recommended Shrinkage Temperature: 120°C - 150°C / 248°F - 302°F; Minimum Shrinkage Temperature: 110°C / 230°F; Melting Temperature: 150°C + / 302°F +; Shrink Ratio: 2:1; Wall Thickness (After Shrinkage): 1mm / 0.03"; Flame Retardant: Yes; Flammability Rating: VW-1; Halogen Free?: Yes; Material: PE/PET / Polyolefin & Polyester; Fluid & Chemical Resistance: Hydraulic Fluids, Fuels, Antifreeze, Oils etc.; Colour: Black; Part Number: Fits Braided Hose Size; AN3 & AN4: 10mm / 0.39"; AN4: 20mm / 0.78"; AN6: 26mm / 1.02"; AN8 & AN10: 30mm / 1.18"; AN10 & AN12: 35mm / 1.37"; AN12, AN16, AN20: 40mm / 1.57" |
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
Some items need a delivery quote. You can buy the other items now.
Items needing a quote will be saved in this browser. Return to your basket to restore them and request a quote.Sign in to save your quote items to your account. Access them from any device.
These items are saved in this browser and are not in your checkout. Restore them to your basket when you are ready to request a quote.
Sign in to save your quote items to your account. Access them from any device.
