Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A close-fitting steel bumper with useful details throughout
The Bomber gives your Super Duty a purposeful steel rear bumper that follows the truck bodywork closely. Recovery mounts, integrated lighting positions and tidy wiring provision make it useful beyond the way it looks.
SKU: R810141090103
Dedicated mounts for your recovery equipment
Two clevis mounts are 1 inch thick and accept nominal 3/4-inch D-ring shackles with 7/8-inch pins. Those are separate dimensions: the nominal shackle size is not the pin diameter. The integrated mounts give you dedicated attachment points for suitable recovery equipment.
Rear lighting with tidy wiring
Two 3-inch cube-light mounts let you add suitable rear lamps for seeing behind the truck in low light. Internal zip-tie slots help keep their wiring neatly secured inside the bumper rather than hanging around the rear of the vehicle.
Keep the daily functions you need
Factory parking sensors, the hitch, trailer harness and number-plate lights are retained. Hammer Black powder coat on the steel contrasts with Satin Black powder-coated aluminium panels, giving the bumper a finished look that suits your Super Duty. It is made in the USA and uses bolt-on mounting.
Fitting your bumper
We recommend professional installation for accurate alignment, tidy finishing and correct positioning of factory equipment. Fitting includes:
- Trim sensor-bezel tabs if the bezels do not click.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| R810141090103 | Ford | F-250 | 2023-2026 | - |
| R810141090103 | Ford | F-350 | 2023-2026 | - |
| R810141090103 | Ford | F-450 | 2023-2026 | - |
These applications are for North American-spec vehicles.
Technical specifications
| Specification | Details |
|---|---|
| SKU | R810141090103 |
| Series | Bomber |
| Construction | Steel |
| Design | Close-fitting steel with aluminium accent panels |
| Rear lighting | Two 3-inch cube-light mounts |
| Recovery mounts | Two clevis mounts, 1 inch thick |
| Compatible shackles | Nominal 3/4-inch D-ring shackles with 7/8-inch pins |
| Wiring management | Internal zip-tie slots |
| Factory equipment | Parking sensors, hitch, trailer harness and number-plate lights retained |
| Mounting | Bolt-on |
| Fitting | Trim sensor-bezel tabs if the bezels do not click |
| Finish | Hammer Black powder coat |
| Accent finish | Satin Black powder coat |
| Country of manufacture | Made in the USA |
Frequently asked questions
Is the shackle size the same as the pin diameter?
No. The compatible D-ring shackle size is nominally 3/4 inch, while the pin diameter is 7/8 inch. The mounts themselves are 1 inch thick.
How should I look after the finish?
Wash off mud and road salt after your trips, let the parts dry, and inspect the finish regularly. Repair chips promptly to keep the surface protected.
Talk to us about fitting and the compatible equipment for your vehicle.
