Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Finish your Raptor with a tougher rear bumper
The HoneyBadger gives your Raptor a substantial steel rear bumper that follows its factory dovetail shape. Integrated rear lighting mounts and textured step plates make it useful when loading the bed or working around the truck, as well as giving the rear end a much bolder appearance.
SKU: R117321430103
Steel protection and useful step plates
The box design uses 1/8-inch external steel plating and 3/16-inch internal structure plating. Reinforced clevis mounts use 1-inch steel and accept soft shackles. Dimple-died step plates provide a better surface for your footing on top of the bumper.
Add useful rear lighting
The bumper has Dually mounting positions and 10-inch LED light-bar positions behind the side accent panels. These let you add rear lighting for off-road use and work around the truck. The lamps and wiring are separate.
Keep your factory equipment
Factory dual exhaust, tow hooks and backup sensors are retained. The factory number-plate lights transfer, and a supplied relocation bracket positions the trailer connector in the bumper.
Fitting your bumper
Removal requires grinding five welds to release the number-plate structure from the rear frame. Sensor-ring tabs are trimmed only if the rings do not click into place. The trailer-connector harness has its first retaining clip released to reach the relocated socket. Professional fitting helps complete the hitch, sensor and lighting transfer correctly.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| R117321430103 | Ford | F-150 Raptor | 2017-2020 | - |
Applications shown are for North American-spec vehicles.
Talk to us about compatible lighting, recovery equipment and fitting parts for your bumper.
Technical specifications
| Specification | Details |
|---|---|
| Outer plating | 1/8-inch steel |
| Internal structure | 3/16-inch steel |
| Clevis mounts | 1-inch steel; for soft shackles |
| Steps | Dimple-died step plates |
| Rear lighting | Dually positions and 10-inch bars behind side panels |
| Retained equipment | Factory dual exhaust, tow hooks and backup sensors |
| Number-plate lights | Factory housings and lamps transferred |
| Trailer connector | Supplied relocation bracket; release first harness clip for reach |
| Removal change | Grind five welds to release number-plate structure |
| Sensor-ring tabs | Trim only if rings do not click into place |
| Finish | Hammer Black powder coat |
| Country of manufacture | USA |
Frequently asked questions
Can I keep the factory dual exhaust and sensors?
Yes. The bumper retains the factory dual exhaust and backup sensors.
Does it include the rear lights?
No. The Dually and 10-inch bar positions are mounts; the lamps and wiring are separate.
Does fitting involve permanent work?
Yes. Five welds are ground to remove the factory number-plate structure.
What happens to the trailer socket?
It moves into the supplied relocation bracket. The first harness retaining clip is released so the connector reaches its new position.
