Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A sharper look for your Raptor
The ADD Edge gives your Raptor a sharply styled, low-profile steel front end with four round lights recessed into its face. Its close fit makes the bumper look part of the truck, while the removable aluminium skid plate adds protection beneath the front end.
SKU: F210443130103
Protection and a close fit
The included skid plate is 3/16-inch aluminium and can be removed. Two-stage Hammer Black powder coat on the steel and Satin Black accent panels give the bumper a finished contrast that suits the Raptor.
Choose your off-road lighting
The centre mounting arrangement accepts four RIGID 360 round lights or four Baja Designs LP4 round lights. Choose the compatible lamps you want to run; lights and wiring are separate. The factory fog lights and factory skid plate are not compatible with this bumper.
Recovery equipment and factory features
Factory recovery points and parking sensors are retained. The standard Raptor keeps its factory intercooler. ACC-equipped trucks require the separate AC1305101NA relocation bracket. On the standard Raptor, an optional IC1650KIT upgrade requires shutter motor relocation, with an additional relocation kit on 2024+ models. Raptor R has the separate AC21112301NA heat exchanger option.
Fitting your bumper
On the standard Raptor, the original shutter motor is removed from its guard, reconnected and secured. The 2024 model follows the shutter motor bracket fitting route. Sensor tabs are trimmed only if the bezels do not click into place. Trimming the inner fender liners is recommended for the best fit around the bumper.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| F210443130103 | Ford | F-150 Raptor | 2021-2026 | - |
| F210443130103 | Ford | F-150 Raptor R | 2023-2026 | - |
Applications shown are for North American-spec vehicles.
Talk to us about compatible lighting, recovery equipment and fitting parts for your bumper.
Technical specifications
| Specification | Details |
|---|---|
| Construction | Steel with Satin Black accent panels |
| Included skid plate | Removable 3/16-inch aluminium |
| Centre lighting | Four RIGID 360 round lights or four Baja Designs LP4 round lights |
| Factory equipment | Recovery points and parking sensors retained; standard Raptor keeps factory intercooler |
| ACC | Separate AC1305101NA bracket required on equipped trucks |
| Factory exclusions | OEM fog lights and skid plate are not compatible |
| IC1650KIT upgrade | Standard Raptor: separate; shutter motor relocation required, with an additional kit on 2024+ models |
| Raptor R cooling alternative | Separate AC21112301NA heat exchanger kit |
| Sensor tabs | Trim only if bezels do not click into place |
| Inner liners | Trimming recommended for best fit |
| Finish | Hammer Black powder coat |
| Country of manufacture | USA |
Frequently asked questions
Are the round lights included?
No. The bumper provides the mounts for four RIGID 360 or four Baja Designs LP4 lights. The lamps and wiring are separate.
Can I keep my factory intercooler?
Yes, on the standard Raptor. IC1650KIT is an optional upgrade that requires shutter motor relocation, with an additional kit on 2024+ models. Raptor R has the separate AC21112301NA heat exchanger option.
Can I reuse the factory fog lights and skid plate?
No. Those factory parts are not compatible. The bumper includes its removable 3/16-inch aluminium skid plate.
Does it fit Raptor R?
Yes. The Raptor R years are shown in the fitment table. Its separate AC21112301NA heat exchanger option is different from the standard Raptor intercooler upgrade.
