Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A tougher look with room for your chosen lights
The Stealth Fighter gives your Bronco a slim steel front bumper with a useful choice of centre lighting. It sits close to the bodywork, adding protection and off-road clearance while leaving the light selection up to you.
SKU: F230142210103
Protection and a close fit
The radius plate-steel design is finished in Hammer Black with Satin Black panels. Louvres in the lower panel allow airflow to the intercooler. A separate 3/16-inch aluminium skid plate is available if you want to add full protection below the bumper.
Choose your off-road lighting
Choose a 30-inch radius light bar or up to eight cube lights in the centre, plus one cube light behind each side panel. Lights and wiring are separate purchases.
Recovery equipment and factory features
Your parking sensors are retained, with sensor-hole plugs supplied for non-sensor models. Reinforced clevis mounts accept soft shackles. To retain ACC on an equipped Bronco, fit the separate relocation bracket. The factory skid plate can be retained with trimming.
Fitting your bumper
The factory D-ring loops are cut flush with their brackets for clearance. If you retain the OEM plastic skid, trim it as shown in the fitting guide. Professional installation helps achieve a tidy finish and correctly positioned sensors.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| F230142210103 | Ford | Bronco | 2021-2026 | - |
Applications shown are for North American-spec vehicles.
Talk to us about compatible lights, recovery equipment and fitting your bumper.
Technical specifications
| Specification | Details |
|---|---|
| SKU | F230142210103 |
| Construction | Radius plate steel |
| Centre lighting | 30-inch radius light bar or up to eight cube lights |
| Side lighting | One cube-light mount per side |
| Lower panel | Louvres for intercooler airflow |
| Recovery | Reinforced clevis mounts for soft shackles |
| Factory sensors | Retained; plugs supplied for non-sensor models |
| Skid plate | Separate 3/16-inch aluminium plate, or trimmed OEM plate |
| Adaptive cruise control | Separate relocation bracket required on ACC-equipped vehicles |
| Fitting | Factory D-ring loops cut flush; plastic OEM skid trimmed if retained |
| Finish | Hammer Black powder coat with Satin Black panels |
| Country of manufacture | USA |
Frequently asked questions
Can I keep the factory skid plate?
Yes, with trimming. You can also choose the separate 3/16-inch aluminium skid plate.
Will it work on a Bronco without parking sensors?
Yes. Plugs are supplied for the unused sensor holes.
Does fitting involve cutting?
Yes. The factory D-ring loops are cut flush with their brackets. The factory plastic skid is also trimmed if you retain it.
