Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A bolder rear bumper with room for your bigger spare
The Phantom gives your Bronco Raptor an angular, close-fitting steel rear bumper with useful recovery and lighting provisions. Its sharp profile suits the Raptor bodywork, with room for a larger spare on the original carrier.
SKU: R260191090103
A 37-inch spare on your factory carrier
The bumper accommodates a spare up to 37 inches on the factory carrier. An included number-plate relocation bracket moves the plate up towards the tailgate, with the original number-plate light relocated to the same position. That keeps the rear of the vehicle neatly arranged around the spare.
Recovery mounts and recessed lighting
The clevis mounts are 1 inch thick and accept nominal 3/4-inch D-ring shackles. Two recessed 3-inch cube-light mounts, one per side, let you add suitable rear lamps for seeing the ground behind you off-road after dark.
Keep your parking and towing equipment
OEM parking sensors, the hitch and trailer plug and harness remain in use. Two-stage Hammer Black powder coat and Satin Black powder-coated aluminium accent panels give the bumper its contrasting finish. It is made in the USA and uses bolt-on mounting.
Fitting your bumper
We recommend professional installation for accurate alignment, tidy finishing and correct positioning of factory equipment. Fitting includes:
- Open and rewrap the passenger-side sensor harness covering for reach.
- Extend driver-side inner sensor wires with supplied wire, connectors and loom.
- Trim sensor-bezel tabs if the bezels do not click.
- File the outer sensor backer tabs.
- File the number-plate light tabs.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| R260191090103 | Ford | Bronco Raptor | 2022-2026 | - |
These applications are for North American-spec vehicles.
Technical specifications
| Specification | Details |
|---|---|
| SKU | R260191090103 |
| Series | Phantom |
| Construction | Steel |
| Design | Low-profile knife-edge steel design |
| Rear lighting | Two recessed 3-inch cube-light mounts, one per side |
| Recovery | 1-inch-thick clevis mounts for nominal 3/4-inch D-ring shackles |
| Spare provision | Up to 37 inches on factory carrier |
| Included bracket | Number-plate relocation; factory number-plate light retained and relocated |
| Factory equipment | Parking sensors, hitch and trailer plug/harness retained |
| Mounting | Bolt-on |
| Fitting | Open and rewrap the passenger-side sensor harness covering for reach; Extend driver-side inner sensor wires with supplied wire, connectors and loom; Trim sensor-bezel tabs if the bezels do not click; File the outer sensor backer tabs; File the number-plate light tabs |
| Finish | Two-stage Hammer Black powder coat |
| Accent panels | Aluminium with Satin Black powder coat |
| Country of manufacture | Made in the USA |
Frequently asked questions
Is a new spare carrier required for a 37-inch spare?
No. The bumper provides clearance for a spare up to 37 inches on the factory carrier.
How should I look after the finish?
Wash off mud and road salt after your trips, let the parts dry, and inspect the finish regularly. Repair chips promptly to keep the surface protected.
Talk to us about fitting and the compatible equipment for your vehicle.
