ALMONT4WD / Toyota Land Cruiser J250 2024+

Almont Toyota Land Cruiser J250 Diesel and Petrol Gearbox and Transfer Skid Plate

✓ Fitment checked
£622.44 VAT included. Shipping calculated for your destination.

In stock

Not sure which one? Ask us to confirm fitment first →
Fitment checked before you order

Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.

Technical specifications
Manufacturer Almont4WD
Product Type Gearbox and transfer skid plate
SKU PDT25B6 / PDT25B8
Vehicle Application Toyota Land Cruiser J250, diesel / petrol
Material EN AW-5083 H111 duralumin, certified
Thickness 6mm or 8mm
Warranty 3 years against cracking of the plate

Summary

The middle of a Land Cruiser J250 is where rock steps and ridge crowns strike: the gearbox and transfer case sit low, and their casings are the difference between driving home and being towed. This Almont gearbox and transfer skid plate covers that run in certified EN AW-5083 H111 duralumin, in your choice of 6mm SportDuty or 8mm HeavyDuty, for diesel and petrol J250s alike. Almont recommends 6mm for lighter duty and 8mm for continental travel over desert and rock, and both mount to original chassis points with steel brackets and pre-installed bolts.

Best For

  • J250 drivers crossing rock gardens, ruts and step climbs where the centre grounds first
  • Expedition builds choosing 8mm for loaded, remote, rough-country travel
  • Green-laners choosing 6mm to save weight while covering the driveline

Key Specs

  • Manufacturer: Almont4WD, Spain
  • Product Type: gearbox and transfer case skid plate
  • SKU: PDT25B6 (6mm) or PDT25B8 (8mm)
  • Vehicle Application: Toyota Land Cruiser J250, diesel and petrol
  • Material: certified EN AW-5083 H111 duralumin
  • Duty Choice: SportDuty 6mm or HeavyDuty 8mm at the variant picker

Fitment And Setup Checks

  • Pick the duty by use: Almont's guidance is 6mm for lighter off-road work, 8mm for heavy or overland use.
  • One cut covers diesel and petrol engines, so only the thickness needs choosing.
  • Not compatible with diff-drop kits, body lifts or modified transmission mounts; raised suspension is fine.
Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Questions before you order

Frequently asked questions

Which duty should a UK J250 take?

For green lanes and family off-roading Almont calls 6mm perfect; for loaded overland trips across desert and rock it recommends 8mm, which it states is 30% more resistant than the 6mm plates.

What else completes the underside?

The fuel tank plate covers the rear and the front plate with recovery point leads the truck.

Fitment first

Exact fit for your vehicle, checked before you order

Use the checked vehicle route, then confirm model year, engine, drivetrain, hardware and existing modifications on the product page or with our team before you commit.

✓ Fitment checked
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

Almont Toyota Land Cruiser J250 Diesel and Petrol Gearbox and Transfer Skid Plate
Almont Toyota Land Cruiser J250 Diesel and Petrol Gearbox and Transfer Skid PlateHeavyDuty 8mm
In stock £622.44