Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
| Specification | Details |
|---|---|
| Manufacturer | Old Man Emu / ARB |
| SKU | XSC2722 |
| Manufacturer part number | 2722 |
| Application | Land Cruiser 200 Series; corresponding OME installation |
| Position | Rear |
| Load choice | Medium |
| Approximate lift | 20mm; vehicle and load dependent |
| Exclusions | AHC hydraulic suspension and KDSS application |
| Coil rate | 48N/mm; approximately 275lb/in |
| Spring-bar diameter | 19mm |
| Free height A / B | 440 / 430mm |
| Turns | 7.2 |
| Weight | 8kg per coil |
| Installation | Matched rear dampers and complete clearance/alignment checks |
The right rear spring helps your Land Cruiser carry its normal equipment without choosing a heavy-load option it does not need. OME 2722 is the medium rear coil choice for the corresponding Land Cruiser 200 Series installation, with approximately 20mm lift in the matched application.
SKU: XSC2722
The 20mm figure is the approximate installed lift in the listed OME combination. Vehicle equipment and load affect the actual height. This 2722 application excludes AHC hydraulic suspension and is not the KDSS rear-coil choice; the catalogue specifies a different spring for that configuration.
Choose springs and rear dampers together, with the installer checking the vehicle specification before fitting.
These coils use 19mm spring bar, with A/B free heights of 440/430mm and 7.2 turns. Their rate is 48N/mm, equivalent to approximately 275lb/in. Those figures help identify the spring and distinguish it from a different load or lift option.
Use the vehicle as it is normally driven to make the choice. Permanent accessories and an often-empty boot call for different suspension decisions from a vehicle that carries a full load every day.
Fit the matched components, then check suspension travel, clearances and alignment. The spring choice does not change the Land Cruiser's legal gross weight or axle limits. Keep your regular load within those limits and maintain the suspension as part of normal servicing.
| Specification | Details |
|---|---|
| Manufacturer | Old Man Emu / ARB |
| SKU | XSC2722 |
| Manufacturer part number | 2722 |
| Application | Land Cruiser 200 Series; corresponding OME installation |
| Position | Rear |
| Load choice | Medium |
| Approximate lift | 20mm; vehicle and load dependent |
| Exclusions | AHC hydraulic suspension and KDSS application |
| Coil rate | 48N/mm; approximately 275lb/in |
| Spring-bar diameter | 19mm |
| Free height A / B | 440 / 430mm |
| Turns | 7.2 |
| Weight | 8kg per coil |
| Installation | Matched rear dampers and complete clearance/alignment checks |
2722 is not the KDSS rear-coil selection in this OME application. KDSS uses a different listed spring.
The matched application excludes AHC hydraulic suspension.
20mm is the approximate figure for the matched application. Vehicle specification, equipment and load affect the final height.
They are the medium rear choice. Select by the weight the vehicle normally carries rather than assuming a heavier-rated spring will give a better ride.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
