Know the landed cost before you order
Prices include VAT. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Replace the correct left-side leads on your Camaro
The Kooks CAS-104326 gives your Camaro the wiring reach it needs when refitting a matched header installation. The kit supplies the front-left and rear-left O2 extensions for the 2016-2024 Camaro SS and 2017-2024 ZL1. Different lengths and connector colours make each position easy to identify.
SKU: CAS-104326
Two positions, two lead lengths
The front-left lead has 10" extension length and a black four-pin connector. The rear-left lead has 8" extension length and a grey four-pin connector. This kit covers those two left-side positions, not all four sensors.
Keep the wiring clear
Match each lead to its position and connector, then route it clear of the exhaust heat and moving parts. Relevant Kooks header kits include extensions where required; these are useful replacement leads when needed.
Vehicle fitment
| Years | Vehicle and trim | Engine | Applicable SKU / fitting conditions |
|---|---|---|---|
| 2016-2024 | Chevrolet Camaro SS | 6.2L V8 | CAS-104326 |
| 2017-2024 | Chevrolet Camaro ZL1 | 6.2L V8 | CAS-104326 |
Ordering and delivery
Estimated lead time is 4-6 weeks. Delivery may be faster depending on stock levels. Shipping is charged separately.
Technical specifications
| Specification | Details |
|---|---|
| SKU | CAS-104326 |
| Application | Camaro SS 6.2, 2016-2024; Camaro ZL1 6.2 supercharged, 2017-2024 |
| Front-left lead | One 10" extension; four-pin black connector |
| Rear-left lead | One 8" extension; four-pin grey connector |
| Total contents | Two left-side extension leads |
Frequently asked questions
Does it cover every sensor on the car?
It supplies the front-left and rear-left extension leads.
How do I tell the two leads apart?
The front-left extension is 10" with a black four-pin connector; the rear-left is 8" with a grey four-pin connector.
Does it change the O2 sensor signal?
It extends the wiring and is not a spacer or calibration device.
