Available to Order
Not sure which one? Ask us to confirm fitment first →For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
| Manufacturer | Bushranger 4x4 Gear |
|---|---|
| Product Type | Inflatable Exhaust Jack |
| Maximum Lift Capacity | 2,000 kg (4,400 lbs) |
| Maximum Inflated Height | 750 mm (30 inches) |
| Maximum Inflated Diameter | 650 mm (25.5 inches) |
| Pressure Capacity | 10 psi |
| Main Material | Reinforced PVC |
| Hard Top | Triple density, reinforced layers |
| Total Kit Weight | 8.6 kg (19 lbs) |
| X-Jack Weight | 5.4 kg (12 lbs) |
| Included Accessories | Heavy-duty storage bag, high-temperature hoses, protective mat, replacement seal kit, gloves, compressor adapter |
The ARB Bushranger X-Jack Inflatable Exhaust Jack is a purpose-built recovery tool for off-roaders, overlanders, and expedition drivers who demand a reliable solution when traditional jacks fail. Developed by Bushranger 4x4 Gear and supplied by ARB, this inflatable jack is trusted by those who regularly face sand, mud, or snow—environments where mechanical jacks can become liabilities. Designed for vehicles up to 2,000 kg, the X-Jack offers a safe, controlled lift even in the most unpredictable conditions.
Soft or unstable ground can render conventional jacks ineffective, risking vehicle damage or personal injury. The X-Jack addresses this by distributing the load over a wide, reinforced surface area, preventing sinking and instability. Inflation is achieved via your vehicle’s exhaust or a portable air compressor, allowing flexible operation regardless of exhaust configuration. This makes the X-Jack especially useful for solo travellers, remote expeditions, or anyone who cannot rely on solid ground for recovery.
Not suitable for vehicles over 4,000 kg (8,800 lbs) gross vehicle weight. For vehicles with dual or sharply angled exhausts, use the compressor adapter for safe inflation.
Using the ARB Bushranger X-Jack is straightforward but requires attention to safety. Always place the included protective mat and X-Jack under a solid underbody lifting point—never under fuel tanks, plastics, or the exhaust itself. Connect the inflation hose to your vehicle’s exhaust or compressor as appropriate. Inflate slowly, monitoring the jack’s position and the lift. Stop inflating once the vehicle is raised or the jack ceases to lift. Always use in a well-ventilated area and switch off the engine after inflation. For best results and safety, consider completing an off-road recovery course.
This product is ideal for:
The X-Jack is especially valuable for those who travel solo or in small groups, where self-recovery is critical and ground conditions are often unknown. Its compact design and comprehensive kit make it a practical addition to any recovery gear setup.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
The X-Jack inflates using your vehicle’s exhaust or a portable air compressor. It is suitable for vehicles up to 2,000 kg (4,400 lbs) and not recommended for vehicles over 4,000 kg (8,800 lbs) GVW.
Vehicles with acute angle or dual exhausts should use the compressor adapter for inflation. Check your exhaust configuration before use to ensure compatibility.
The kit includes the inflatable jack, heavy-duty storage bag, high-temperature hoses, protective mat, replacement seal kit, gloves, and a compressor adapter.
The X-Jack is designed for soft or unstable ground but may not be suitable for all recovery scenarios. Assess ground conditions and always follow safety guidelines.
It is strongly recommended to complete an off-road recovery course before using the X-Jack to ensure safe and effective operation.
Clean and dry the X-Jack before storage. Inspect for wear or damage and replace seals as needed using the included kit.
Check dimensions, mounting points, clearance and any wiring or hose requirements against your setup before ordering.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
