In stock
Not sure which one? Ask us to confirm fitment first →Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
| Manufacturer | Almont4WD (Spain) |
|---|---|
| Product Type | Fuel tank skid plate |
| Vehicle Application | Ford Ranger T6PX1 TDCi 2012-15 |
| Material | EN AW-5083 H111 duralumin |
| Thickness | 6 mm (SportDuty) |
| Weight | 15 kg |
| SKU | PDFR1D6 |
| Warranty | 3 years against cracking of the plate |
The fuel tank is one of the softest targets under a Ranger: it sits low, it is full of exactly what you need to get home, and a sharp rock or dragged rut can hole it. This Almont fuel tank skid plate for the Ford Ranger T6PX1 TDCi 2012-15 covers the tank with 15 kg of 6 mm EN AW-5083 H111 duralumin, so debris and ground contact scrub along SportDuty plate rather than the tank itself. Fit it once and stop thinking about every scrape you hear behind the cab.
Made for the standard tank on 2012-15 PX1 trucks - Almont's tank plates cannot be fitted where the original tank has been swapped for a larger replacement, so long-range-tank owners should talk to us first. Later PX2 and PX3 Rangers take their own tank plates. Raised suspension is fine; body lift kits are not. It pairs naturally with the T6PX1 front plate and the rear differential plate for cover front to back.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
No. Almont states its tank plates cannot be installed once the original tank has been replaced with a larger one - the plate is shaped around the standard tank.
A pressure wash once a year - more often after salty or very muddy ground - plus an annual check that the bolts are tight.
Use the checked vehicle route, then confirm model year, engine, drivetrain, hardware and existing modifications on the product page or with our team before you commit.
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.
