EBC Apollo Big Brake Kit for Ford Fiesta Mk7 | BBK017

Make the Fiesta you enjoy driving feel more confident under braking

You do not have to start with an ST to care about brake feel. The EBC Apollo BBK017 gives the listed Mk7 Fiesta applications four-piston front calipers and 300 mm floating discs. It is a proper caliper-and-disc conversion for a firmer, more responsive pedal, with a choice of road finishes and a separate Race competition configuration.

Kit reference: BBK017. Exact SKUs for every available configuration are listed below.

Control you can appreciate on every drive

The caliper's reinforced aluminium body helps it resist flex under pressure, so the upgrade is about more than appearance. Its fully floating discs give the friction ring room to expand as it heats up, reducing thermal stress during repeated braking. Match that engineering to the way you use the car, keeping the exact engine and original brake conditions in the fitment table in view.

Calipers made for the way you use your car

The road calipers are designed, manufactured and assembled in the UK from heat-treated, low-pressure cast aluminium. Their two-piece bodies use grade 12.9 bridge bolts, with hard-anodised aluminium pistons, stainless-steel bleed nipples and wear plates. The material and construction put substance behind the appearance of the upgrade.

External dust boots keep road dirt and debris away from the pistons, with high-temperature EPDM fluid seals behind them. A hard-anodised body gives corrosion protection beneath the high-temperature colour coating, while the single pad-retention bolt allows quick pad changes when servicing is due.

Choose your kit

This BBK017 offer uses 300 mm front discs and 4-piston calipers. Match the vehicle and original brake details below, then check the exact wheel-clearance template before selecting the caliper configuration.

Black, Blue, Red and Yellow are the painted road-caliper choices, with external dust boots and aluminium pistons. Choose the finish you want to see behind your wheels without changing the kit specification for that version.

Race competition is a different hardware and pad specification: hard-anodised calipers, stainless-steel castellated pistons and RP-X race pads. It is intended for dedicated track and race use, rather than chosen as another paint colour.

What is included

With the painted road configurations you receive:

• Two Apollo front calipers in the selected road colour
• Two fully floating two-piece front discs to the selected kit specification
• Front brake pads
• Stainless-steel braided brake lines
• Vehicle-specific mounting brackets and fitting hardware
• 1 litre of BF307+ Super DOT 4 brake fluid

The Race competition front brake assembly combines Apollo competition calipers, fully floating two-piece discs to the selected specification and RP-X race pads.

Technical specifications

Kit options and SKUs

Vehicle fitment

Match your vehicle, engine, year and any brake-package notes in the table. Disc measurements in this fitment table describe the original brakes; the new kit dimensions are listed under Technical specifications and in the SKU table.

Application years can vary by engine and kit option; check the detailed rows for your vehicle.

Fitting and looking after your brakes

Have the kit fitted by a qualified brake specialist. The installation needs clean, sound mounting surfaces, the correct hardware and torques, proper bleeding, and clearance checks through steering and suspension movement. Dust-shield removal or modification can be part of fitting; keep any vehicle-specific instructions in the application table with the job.

The road kit is designed around the original master cylinder and rear brakes. If you have changed the master cylinder or rear brake arrangement separately, have your installer check compatibility and brake balance before ordering.

Follow the fitting instructions and the bedding procedure for the supplied pad compound before demanding full performance. When rear components are supplied, fit them as part of the intended brake upgrade. Inspect pad and disc condition regularly, especially during circuit use, and keep the hydraulic system in good condition.