Know the landed cost before you order
Prices include VAT. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Upgrade your Camaro's headers and keep its factory cats
Enjoy a header upgrade without replacing the whole front exhaust. These Kooks Super Street headers bolt to the factory catalytic converters on the 2016-2024 Camaro SS LT1, using stepped primary tubes and 304 stainless steel construction.
SKU: 22601300
Stepped tubes with the OEM cat connection
The primaries step from 1-3/4" to 1-7/8". Round ports, the stock bolt pattern and 3/8" laser-cut flanges match the engine-side installation, while the flanged outlets connect to the OEM cats.
Fitting parts included
Gaskets and installation bolts are included, along with the coolant overflow tank spacers and replacement fasteners used during fitting. Installation spaces the tank and replaces the specified block bolt and steering-shaft bolt with lock washer. A tune is not required for this specified installation; we recommend tuning advice to make the most of your complete engine setup.
Tuning for your exhaust upgrade
We recommend tuning with every header installation so the calibration suits your new headers, complete exhaust and fuel. For a 2016-2021 Camaro, see our custom Camaro tuning with remote and dyno options. Talk to us to arrange the calibration for your headers, or if your Camaro is a 2022-2024 model.
Vehicle fitment
| Years | Vehicle / trim | Engine | Applicable SKU | Fitting conditions |
|---|---|---|---|---|
| 2016-2024 | Chevrolet Camaro SS | 6.2L V8 | 22601300 | Bolts to OEM catalytic converters |
| 2017-2024 | Chevrolet Camaro ZL1 | 6.2L V8 | 22601300 | Bolts to OEM catalytic converters |
Ordering and delivery
Estimated lead time is 4-6 weeks. Delivery may be faster depending on stock levels. Shipping is charged separately.
Technical specifications
| Specification | Details |
|---|---|
| SKU | 22601300 |
| Application | 2016-2024 Camaro SS, 6.2L LT1 |
| Material | 304 stainless steel |
| Primaries | Stepped 1-3/4" to 1-7/8" |
| Head interface | Round port; stock bolt pattern; 3/8" laser-cut flanges |
| Rear interface | Flanged outlets to OEM catalytic converters |
| Included fitting parts | Gaskets and installation bolts |
| Tuning | Not required as supplied; recommended by us |
| Fitting changes | Supplied coolant overflow tank spacers; replacement block bolt and steering-shaft bolt with lock washer |
Frequently asked questions
Do I need separate front connection pipes?
These Super Street headers bolt to the factory catalytic converters, giving you the OEM-cat route.
Do they come with gaskets and bolts?
Yes. The gaskets and bolt kit are included.
