Know the landed cost before you order
Prices include VAT. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Headers for your LS-powered third-gen F-body
An LS conversion can make your third-gen Camaro or Firebird a very different car to use. Kooks 22312600 gives the exhaust a purpose-made 2-inch-primary header, with 304 stainless construction and 3-inch TORCA collectors.
SKU: 22312600
Made around the specified K-member
The installation requires the BMR KM008 tubular A-arm K-member. Match that chassis arrangement before ordering, so the header choice fits the engine and suspension in your conversion.
Header fitting parts supplied
The mandrel-bent primaries meet 3/8-inch laser-cut round-port flanges with the factory bolt pattern. PY-8024-AL gaskets, SB-B60029 header bolts and two JI-K61003 TORCA clamps are included.
Tuning for your exhaust upgrade
We recommend tuning with every header installation so the calibration suits your headers, complete exhaust and fuel. Talk to us to discuss tuning for your vehicle and the parts you are fitting.
Vehicle fitment
| Years | Vehicle / trim | Engine | Applicable SKU | Fitting conditions |
|---|---|---|---|---|
| 1982-1992 | Chevrolet Camaro | Installed LS | 22312600 | LS conversion; BMR KM008 tubular A-arm K-member required |
| 1982-1992 | Pontiac Firebird | Installed LS | 22312600 | LS conversion; BMR KM008 tubular A-arm K-member required |
Intended use
22312600: Competition, off-road and track use only. Not for use on public roads.
The competition-use waiver applies to 22312600.
Ordering and delivery
Estimated lead time is 4-6 weeks. Delivery may be faster depending on stock levels. Shipping is charged separately.
Technical specifications
| Specification | Details |
|---|---|
| SKU | 22312600 |
| Application | 1982-1992 Camaro / Firebird with LS conversion |
| Header primary diameter | 2-inch |
| Collector diameter / joint | 3-inch TORCA |
| Flanges | 3/8-inch laser-cut; round ports; factory bolt pattern |
| Construction | Mandrel-bent primaries |
| Included fitting parts | PY-8024-AL gaskets, SB-B60029 header bolts and two JI-K61003 TORCA clamps |
| Required K-member | BMR KM008 tubular A-arm K-member |
| Material | 304 stainless steel |
Frequently asked questions
What K-member is required?
Use the BMR KM008 tubular A-arm K-member for this long tube header installation.
Are the gasket and clamp parts included?
Yes. PY-8024-AL gaskets, SB-B60029 header bolts and two JI-K61003 TORCA clamps are supplied.
