Tackform 2020+ Polaris RZR roll-cage / harness-bar mounting kits

Choose Tackform 2020+ Polaris RZR roll-cage / harness-bar mounting kits to give your devices a mounting point matched to the listed vehicle and fitting position.

Choose your setup

1. Check the listed vehicle and equipment requirements.
2. Choose the supplied build and fitting position, then match the arm and connection where a choice is offered.
3. Select the available finish or accent colour. The selector lists the combinations you can order.

Vehicle fitment

Match the vehicle, dashboard or mounting-point equipment and fitting position before ordering. Any trim, screen, handlebar or factory-equipment exclusions below also apply.

Supplied build and specifications

2020+ Polaris RZR Garmin / AMPS Compatible Mount for Roll Cage / Harness Bar | Choose Your Arm Length

Included: Bar Clamp for 7/8" to 1/2" Bars
Type-B 26mm Metal Ball
DuraLock™ Arm with Dual 26mm Sockets
4.25" Arm
OR
5.25" Arm with Articulating Elbow
7.75" Arm with Articulating Elbow
Garmin GPS / AMPS Compatible Holder with 26mm Metal Ball
Installation Hardware

Fitting and compatibility: Confirmed Vehicle Fitment (this is not a complete list):
2020+ Polaris RZR Pro XP
2022+ Polaris RZR Pro R
2022+ Polaris RZR Turbo R
2025+ Polaris RZR Pro S
Fits roll cage / harness bars from 3/4" up to 7/8" in diameter
Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.
Note: Not compatible with 1”, B-Sized, 25.4mm ball systems.

• 2020+ POLARIS RZR GARMIN GPS / AMPS COMPATIBLE MONITOR MOUNT FOR ROLL CAGE / HARNESS BAR
• When you're blasting through washboards or hammering through the dunes, you need your gear locked down tight. For rock-solid, zero-slip stability in the most unforgiving terrain, nothing beats a direct-fit bar clamp. We built the new lineup of Polaris RZR device mounts entirely from heavy-duty metal components. No cheap plastic, no rattling, and no compromises—just a relentless grip engineered to survive the most extreme off-road environments you can throw at it.
• HARNESS / U-BAR & ROLL CAGE READY Clamps dead-tight to your factory setup for an uncompromising grip that won't slip on the trail. Engineered to fit bars from 3/4" up to 7/8" in diameter for perfect fitment with the 2020+ Pro XP, 2022+ Pro R & Turbo R, and 2025+ Pro S.
• GARMIN GPS & AMPS COMPATIBLE the heavy-duty AMPS plate features the industry-standard 30mm x 38mm (1.181" x 1.496") pattern to dead-lock your Garmin GPS, trail monitor, or cradle. Versatile mounting holes accommodate M4, M5, 10-24, 10-32, #8, and self-threading hardware up to 5.2mm, while the integrated 26mm ball with a tight 1.14" base-to-center profile locks into the 26mm socket systems for zero-shake and zero-slip.
• ULTRA-DURABLE BUILD QUALITY Forget flimsy plastic and gear that snaps when the ride gets rough. Precision-engineered for the extremes, we built this mount to take an absolute beating. Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.

2020+ Polaris RZR Magnetic Tablet Mount for Roll Cage / Harness Bar | Choose Your Arm Length

Included: Bar Clamp for 7/8" to 1/2" Bars
Type-B 26mm Metal Ball
DuraLock™ Arm with Dual 26mm Sockets
4.25" Arm
OR
5.25" Arm with Articulating Elbow
7.75" Arm with Articulating Elbow
Magnetic Tablet Mount
Adhesive Metal Plates
Installation Hardware

Fitting and compatibility: Confirmed Vehicle Fitment (this is not a complete list):
2020+ Polaris RZR Pro XP
2022+ Polaris RZR Pro R
2022+ Polaris RZR Turbo R
2025+ Polaris RZR Pro S
Fits roll cage / harness bars from 3/4" up to 7/8" in diameter
Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.
Note: Not compatible with 1”, B-Sized, 25.4mm ball systems.

• 2020+ POLARIS RZR MAGNETIC TABLET MOUNT FOR ROLL CAGE / HARNESS BAR
• When you're blasting through washboards or hammering through the dunes, you need your gear locked down tight. For rock-solid, zero-slip stability in the most unforgiving terrain, nothing beats a direct-fit bar clamp. We built the new lineup of Polaris RZR device mounts entirely from heavy-duty metal components. No cheap plastic, no rattling, and no compromises—just a relentless grip engineered to survive the most extreme off-road environments you can throw at it.
• HARNESS / U-BAR & ROLL CAGE READY Clamps dead-tight to your factory setup for an uncompromising grip that won't slip on the trail. Engineered to fit bars from 3/4" up to 7/8" in diameter for perfect fitment with the 2020+ Pro XP, 2022+ Pro R & Turbo R, and 2025+ Pro S.
• MAGNETIC TABLET HOLDER WITH METAL PLATES Engineered for durability, the magnetic tablet holder combines premium materials with a robust design. 10 Powerful neodymium magnets are securely encased in a powder coated steel housing, while a non-marring rubber pad ensures your tablet stays secure and scratch-free.
• ULTRA-DURABLE BUILD QUALITY Forget flimsy plastic and gear that snaps when the ride gets rough. Precision-engineered for the extremes, we built this mount to take an absolute beating. Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.

2020+ Polaris RZR Billet Spring Cradle Phone Mount for Roll Cage / Harness Bar | Choose Your Arm Length

Included: Bar Clamp for 7/8" to 1/2" Bars
Type-B 26mm Metal Ball
DuraLock™ Arm with Dual 26mm Sockets
4.25" Arm
OR
5.25" Arm with Articulating Elbow
7.75" Arm with Articulating Elbow
Billet Spring-Loaded Phone Cradle with 26mm Metal Ball
Installation Hardware

Fitting and compatibility: Confirmed Vehicle Fitment (this is not a complete list):
2020+ Polaris RZR Pro XP
2022+ Polaris RZR Pro R
2022+ Polaris RZR Turbo R
2025+ Polaris RZR Pro S
Fits roll cage / harness bars from 3/4" up to 7/8" in diameter
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.
Note: Not compatible with 1”, B-Sized, 25.4mm ball systems.

• 2020+ POLARIS RZR BILLET SPRING-LOADED PHONE MOUNT FOR ROLL CAGE / HARNESS BAR
• When you're blasting through washboards or ripping through sand dunes, you need your gear locked down tight. For rock-solid stability in the most unforgiving terrain, nothing beats a direct-fit bar clamp. Here at Tackform, we built the new lineup of Polaris RZR device mounts entirely from heavy-duty metal components. No cheap plastic, no rattling, and no compromises—just a relentless grip engineered to survive the most extreme off-road environments you can throw at it.
• HARNESS / U-BAR & ROLL CAGE READY Clamps dead-tight to your factory setup for an uncompromising grip that won't slip on the trail. Engineered to fit bars from 3/4" up to 7/8" in diameter for perfect fitment with the 2020+ Pro XP, 2022+ Pro R & Turbo R, and 2025+ Pro S.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Built for the 26 Series Platform, the 26mm ball and socket system locks your device in place when correctly fitted.
• INNOVATIVE CRADLE Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• ULTRA-DURABLE BUILD QUALITY Forget flimsy plastic and gear that snaps when the ride gets rough. Precision-engineered for the extremes, we built this mount to take an absolute beating. Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.

2020+ Polaris RZR All-Metal Spring Cradle Tablet Mount for Roll Cage / Harness bar | Choose Your Arm Length

Included: Bar Clamp for 7/8" to 1/2" Bars
Type-B 26mm Metal Ball
DuraLock™ Arm with Dual 26mm Sockets
4.25" Arm
OR
5.25" Arm with Articulating Elbow
7.75" Arm with Articulating Elbow
SLATE™ All-Metal Tablet Mount
AMPS Plate with 26mm Metal Ball
Installation Hardware

Fitting and compatibility: Confirmed Vehicle Fitment (this is not a complete list):
2020+ Polaris RZR Pro XP
2022+ Polaris RZR Pro R
2022+ Polaris RZR Turbo R
2025+ Polaris RZR Pro S
Fits roll cage / harness bars from 3/4" up to 7/8" in diameter
the SLATE™ holder works with iPads, Android Tablets, and other devices with 6"–16" size displays (not compatible with Galaxy View).
Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.
Note: Not compatible with 1”, B-Sized, 25.4mm ball systems.

• 2020+ POLARIS RZR SPRING-LOADED SLATE™ ALL-METAL TABLET MOUNT FOR ROLL CAGE / HARNESS BAR
• When you're blasting through washboards or hammering through the dunes, you need your gear locked down tight. For rock-solid, zero-slip stability in the most unforgiving terrain, nothing beats a direct-fit bar clamp. We built the new lineup of Polaris RZR device mounts entirely from heavy-duty metal components. No cheap plastic, no rattling, and no compromises—just a relentless grip engineered to survive the most extreme off-road environments you can throw at it.
• HARNESS / U-BAR & ROLL CAGE READY Clamps dead-tight to your factory setup for an uncompromising grip that won't slip on the trail. Engineered to fit bars from 3/4" up to 7/8" in diameter for perfect fitment with the 2020+ Pro XP, 2022+ Pro R & Turbo R, and 2025+ Pro S.
• SUPPORTS A WIDE VARIETY OF TABLETS the SLATE™ holder works with iPads, Android Tablets, and other devices with 6"–16" size displays (not compatible with Galaxy View). Its cradle expands from 5.25" to 10.25" tall, and the grips can adjust from 0.18" to 1.5" depth to fit a variety of tablet cases. Easily swap between portrait & landscape orientations, and enjoy quick one-handed insert/removal of your tablet device.
• ULTRA-DURABLE BUILD QUALITY Forget flimsy plastic and gear that snaps when the ride gets rough. Precision-engineered for the extremes, we built this mount to take an absolute beating. Machined from premium 6061-T6 aluminum, it delivers uncompromising strength and relentless corrosion resistance without adding dead weight to your rig.

Ask us about a compatible setup if you need help matching your vehicle, device or mounting components.