Tackform 2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount

Choose Tackform 2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount to give your devices a mounting point matched to the listed vehicle and fitting position.

Choose your setup

1. Check the listed vehicle and equipment requirements.
2. Choose the supplied build and fitting position, then match the arm and connection where a choice is offered.
3. Select the available finish or accent colour. The selector lists the combinations you can order.

Vehicle fitment

Match the vehicle, dashboard or mounting-point equipment and fitting position before ordering. Any trim, screen, handlebar or factory-equipment exclusions below also apply.

Supplied build and specifications

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With CB Mic Holder & 3.5" Arm

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
3.5" DuraLock™ Arm
Spring-Loaded CB Microphone Mount with 20mm Ball
Installation Hardware

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Installation is fast and easy—no drilling required.

• 2024+ JEEP WRANGLER JL, JT & 2024-2025 4XE LINK™ GRAB BAR MOUNT WITH SPRING-LOADED CB MIC HOLDER
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• Note: This product is compatible with a wide variety of CB microphones. For CB mics with confirmed fitment, please see compatibility info chart below (this is not a complete list):
• Cobra 19 MINI AM/FM, Cobra 25 LTD, Cobra 29 LTD, Cobra 29 LX, Cobra 75 All Road, Cobra LTD NW
• Midland MXT105, MXT115, MXT115P, MXT275, MXT295 Pro, MXT500, MXT575
• Retevis RA86
• SPRING-LOADED FOR RATTLE REDUCTION Designed for standard hanger button-style CB mics, featuring an upgraded composite non-marring, spring-loaded pad that keeps your mic locked tight, preventing slippage and eliminating trail rattle over rough terrain.
• CUSTOM DESIGNED Engineered specifically for a seamless fit on the passenger side Grab Bar of Jeep Wrangler JL/4xe and Gladiator JT models. See compatibility info for more details.
• ROCK-SOLID CONSTRUCTION Crafted from high-grade aluminum, providing a sturdy yet lightweight foundation for mounting your devices.
• EASY INSTALLATION Mounts directly into the existing OEM grab bar bolt location. Installation is fast and easy—no drilling required.
• VERSATILE DEVICE MOUNTING Keeps your devices secure and accessible. the grab bar mount provides an ideal mounting point for phones, CB radios, GPS units, and other off-road essentials.
• Usage Recommendation: Though you may see other Grab Bar setups with tablet holders or mounting other large devices, for optimal stability at the Grab Bar location, we do not recommend using mounting arms that exceed 3.5" in length or mounting any devices over 1lb.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With MagSafe Charging Phone Holder & 3.5" Arm

Included: Just attach the included sleek metal adapter ring to upgrade your device with the exact same heavy-duty grip.
Attach the included 20mm metal ball and that's it!
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.

• 2024+ JEEP JL, JT AND 2024-2025 4XE LINK ™ GRAB BAR MOUNT WITH MAGNETIC CHARGING PHONE HOLDER COMPATIBLE WITH MAGSAFE
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• COMPATIBLE WITH MAGSAFE Experience a rock-solid, non-marring hold with the newly designed MagSafe-compatible phone charger. Built for rugged reliability, it works with any MagSafe-compatible device or case. Don't have a magnetic phone? Just attach the included sleek metal adapter ring to upgrade your device with the exact same heavy-duty grip.
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With Qi2.2/MagSafe Charging & Cooling Phone Holder & 3.5" Arm

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
3.5" DuraLock™ Arm
Qi2.2 25W Charging & Cooling MagSafe Compatible Phone Holder with 20mm Metal Ball
12V Car Charger Adapter with up to 45W PD
1-Meter (3.3 Feet) USB-C to USB-C Charging Cable
Installation Hardware
Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
Attach the included 20mm metal ball and that's it!
The stated up-to output requires a compatible device and the included high-power car charger.
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.

• Active thermoelectric (TEC) cooling helps remove heat from the phone during charging.
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• Note: The included USB cable and plug are required for charging. If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• 25W HIGH-SPEED CHARGING & SEAMLESS COMPATIBILITY Delivers up to 25W of power for high-speed wireless charging. the new charger works with MagSafe, Qi2, and Google Pixel (Pixelsnap). The stated up-to output requires a compatible device and the included high-power car charger.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With Magnetic Midland MXT CB Mic Holder & 3.5" Arm

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
3.5" DuraLock™ Arm
Midland Magnetic CB Mic Receiver with 20mm Ball
Midland Magnetic CB Mic Adapter
Installation Hardware
Attach the included 20mm metal ball and that's it!
Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio.
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
It is only compatible with select Midland radios.
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.

• 2024+ JEEP JL, JT AND 2024-2025 4XE LINK ™ GRAB BAR MOUNT WITH MAGNETIC MIDLAND MXT CB MICROPHONE HOLDER
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• Note: This is not a universal product. It is only compatible with select Midland radios. See compatibility info below for more details.
• Midland MXT275, MXT575, MXT115P
• Retevis RA86
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• INNOVATIVE DESIGN Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio. This simple upgrade transforms your Midland MXT setup into a robust magnetic mounting system.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With MagSafe Phone Holder & 3.5" Arm

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
3.5" DuraLock™ Arm
MagSafe Phone Holder with 20mm Metal Ball
Adhesive Metal Ring (For non-MagSafe devices)
Installation Hardware
Attach the included 20mm metal ball and that's it!
Just attach the included sleek metal adapter ring to upgrade your device with the exact same heavy-duty grip.
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.

• 2024+ JEEP JL, JT AND 2024-2025 4XE LINK ™ GRAB BAR MOUNT WITH MAGNETIC PHONE HOLDER COMPATIBLE WITH MAGSAFE
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• COMPATIBLE WITH MAGSAFE Experience a rock-solid, non-marring hold with the newly designed magnetic phone holder. Built for rugged reliability, it works with any MagSafe-compatible device or case. Don't have a magnetic phone? Just attach the included sleek metal adapter ring to upgrade your device with the exact same heavy-duty grip.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount With 20LITE Phone Holder & 3.5" Arm

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
3.5" DuraLock™ Arm
20LITE Phone Holder with 20mm Metal Ball
Installation Hardware
Attach the included 20mm metal ball and that's it!
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.

• 2024+ JEEP JL, JT AND 2024-2025 4XE LINK ™ GRAB BAR MOUNT WITH 20LITE PHONE HOLDER BILLET SPRING-CRADLE
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Built for the 20 Series Platform, the 20mm ball and socket system locks your device in place when correctly fitted.
• INNOVATIVE CRADLE Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

2024+ Jeep Wrangler JL/4xe & Gladiator JT LINK™ Grab Bar Mount with 20mm Metal Ball

Included: Jeep LINK™ Grab Bar Mount
Type-B 20mm Metal Ball
Installation Hardware
Attach the included 20mm metal ball and that's it!
the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Fitting and compatibility: Jeep Wrangler JL
2024+
Jeep Gladiator JT
Wrangler 4xe
2024-2025
Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless.
Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time.
the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.

• 2024+ JEEP JL, JT AND 2024-2025 4XE LINK ™ GRAB BAR MOUNT FOR PHONES, TABLETS, CB MICROPHONES, HANDHELD RADIOS, AND MORE
• Usage Recommendation: When mounting smaller devices like phones, CB mics, handheld radios or switch panels, we recommend using 3.5" arms. For tablets and other larger devices like lightweight monitors, we recommend using 5" or longer arms.
• FLAWLESS FIT FOR JEEP Experience full-range grab bar positioning that's custom fit for your 2024+ Jeep Wrangler JL, Gladiator JT, or 2024-2025 Wrangler 4xe. Unlike the competitors, we've precision engineered the passenger grab bar mount to lock down tight without marring, denting, or scratching your factory leatherette, keeping your interior flawless. Traditional clamps wrap over the entire bar and with long arms attached to them, they shake and bite into the leatherette, damaging it over time. the mount's c-clamp design locks in behind the grab bar handle so it'll never press up on or ruin your Jeep's leatherette.
• Note: the grab bar mount with its purpose-built underslung design also keeps your gear safely clear of the passenger side airbag deployment zone. To ensure proper clearance, we recommend mounting your devices as shown in the lifestyle photos, keeping the device holder and arm parallel to the grab bar.
• ULTRA-FAST & SIMPLE INSTALL Simply wedge the top of the grab bar mount along the trim behind the passenger grab handle, slide it into your preferred position, and then tighten the top two screws. Attach the included 20mm metal ball and that's it! You're ready to mount your devices with the wide range of 20mm ball and socket components. Have multiple devices? Maximize the full length of your grab bar by installing two or more mounts for a versatile, multi-device setup.
• TYPE-B COMPATIBLE Tackform's standardized method for attaching a ball to mounting surfaces is Type-B, allowing for easy switching between ball sizes and other connections for cross-platform compatibility. the grab bar mount includes a Type-B 20mm metal ball, but with its the versatile Type-B mounting point you can easily swap to a 1-inch rubber ball or a 26mm aluminum ball for use with your existing components.

Ask us about a compatible setup if you need help matching your vehicle, device or mounting components.