Tackform Ford Bronco accessory-ready DuraLock device mounts

Choose Tackform Ford Bronco accessory-ready DuraLock device mounts to give your devices a mounting point matched to the listed vehicle and fitting position.

Choose your setup

1. Check the listed vehicle and equipment requirements.
2. Choose the supplied build and fitting position, then match the arm and connection where a choice is offered.
3. Select the available finish or accent colour. The selector lists the combinations you can order.

Vehicle fitment

Match the vehicle, dashboard or mounting-point equipment and fitting position before ordering. Any trim, screen, handlebar or factory-equipment exclusions below also apply.

Supplied build and specifications

2021+ Ford Bronco LINK™ Qi2.2/MagSafe Charging & Cooling Phone Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Bronco Accessory Ready Mount with 20mm Metal Ball
DuraLock™ Arm
Qi2/MagSafe Phone Holder with 20mm Metal Ball
USB 12V Car Charger Adapter with up to 45W PD
1-Meter (3.3 Feet) USB-C to USB-C Charging Cable
Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.
The stated up-to output requires a compatible device and the included high-power car charger.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH 25W QI2.2 MAGNETIC CHARGING & COOLING PHONE HOLDER COMPATIBLE WITH MAGSAFE
• Note: The included USB cable and plug are required for charging. If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
• 25W HIGH-SPEED CHARGING & SEAMLESS COMPATIBILITY Delivers up to 25W of power for high-speed wireless charging. the new charger works with MagSafe, Qi2, and Google Pixel (Pixelsnap). The stated up-to output requires a compatible device and the included high-power car charger.
• Active thermoelectric (TEC) cooling helps remove heat from the phone during charging.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

2021+ Ford Bronco LINK™ MagSafe Charging Phone Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.
For devices that aren’t MagSafe-compatible, we've included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold with all the benefits of wireless charging.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH MAGNETIC CHARGING PHONE HOLDER COMPATIBLE WITH MAGSAFE
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
• MAGSAFE CHARGING Whether you have the latest MagSafe-compatible device or a MagSafe-compatible phone case, the newly designed MagSafe mount delivers secure and effortless attachment. Now featuring integrated wireless charging capability. For devices that aren’t MagSafe-compatible, we've included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold with all the benefits of wireless charging.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

2021+ Ford Bronco LINK™ MagSafe Phone Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Accessory Ready 20mm Metal Ball Mount
MagSafe Phone Holder
DuraLock™ Arm
Installation Hardware
Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.
For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH MAGNETIC PHONE HOLDER COMPATIBLE WITH MAGSAFE
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
• MAGSAFE COMPATIBLE Whether you have the latest device or a phone case compatible with MagSafe, the newly designed magnetic phone mount with 20mm ball offers an ultra-secure, convenient attachment solution that is both no-slip and non-marring. For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

2021+ Ford Bronco LINK™ GoPro Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
GoPro/Action Camera compatible mount featuring a single thumb screw for secure clamping, no wrench required.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH ACTION CAMERA HOLDER COMPATIBLE WITH GOPRO
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for setup.
• 2-PRONG INTERFACE WITH THUMB SCREW GoPro/Action Camera compatible mount featuring a single thumb screw for secure clamping, no wrench required. Need extra tightening power? You can utilize the straight slot located at the end of the thumb screw using a flathead screwdriver, coin, key, etc. Built with all-metal construction for durability and reliability in any adventure. Capture your moments with confidence.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

2021+ Ford Bronco LINK™ Phone Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH 20LITE BILLET SPRING CRADLE PHONE HOLDER
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

2021+ Ford Bronco LINK™ 1/4"-20 Camera Mount for Accessory Ready / Grab Handle with 3.5" DuraLock™ Arm

Included: Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle.

Fitting and compatibility: Ford Bronco (Non-Sport) & Bronco Raptor (Non-Sport)
2021+
Usage Recommendation: For driver and passenger side grab handle mounts, we recommend a 3.5" arm for the best reach and positioning.
The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

• 6TH GEN BRONCO ACCESSORY READY / GRAB HANDLE MOUNT WITH 1/4"-20 CAMERA HOLDER
• MOUNT IT WHERE YOU NEED IT Hardware is included for installing on the factory accessory ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
• VERSATILE CAMERA HOLDER the all-metal camera holder design is a versatile solution for securely mounting cameras or other compatible devices using the standard 1/4"-20 tripod screw. Ideal for vloggers, car reviews, and dashcam alternatives, this mount is built for extreme ease of use with its aluminum tightening ring for secure mounting. No tools necessary.
• DUAL SOCKET PERFECTION Although we have shorter arms available, the dual socket design will give you the largest range of articulation for perfect positioning. The arm measures 3.5" from end to end and 2.75" from ball center to ball center.
• PREMIUM MATERIALS Real Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts.
• TACKFORM 20 SERIES Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.

Ask us about a compatible setup if you need help matching your vehicle, device or mounting components.