Tackform 2010-2024 Toyota 4Runner Assault Track Picatinny Dash Bracket

Choose Tackform 2010-2024 Toyota 4Runner Assault Track Picatinny Dash Bracket to give your devices a mounting point matched to the listed vehicle and fitting position.

Choose your setup

1. Check the listed vehicle and equipment requirements.
2. Choose the supplied build and fitting position, then match the arm and connection where a choice is offered.
3. Select the available finish or accent colour. The selector lists the combinations you can order.

Vehicle fitment

Match the vehicle, dashboard or mounting-point equipment and fitting position before ordering. Any trim, screen, handlebar or factory-equipment exclusions below also apply.

Supplied build and specifications

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With Qi2.2/MagSafe Charging & Cooling Phone Mount

Included: Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
The stated up-to output requires a compatible device and the included high-power car charger.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Note: The included USB cable and plug are required for charging.
If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 25W QI2.2 MAGNETIC CHARGING & COOLING PHONE MOUNT COMPATIBLE WITH MAGSAFE
• Note: The included USB cable and plug are required for charging. If your vehicle does not have a 45W PD power supply on the dash, the cable must be connected to the 12V cigarette lighter outlet using the included power adapter to function properly.
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed magnetic (MAGSAFE CHARGING & COOLING) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• 25W HIGH-SPEED CHARGING & SEAMLESS COMPATIBILITY Delivers up to 25W of power for high-speed wireless charging. the new charger works with MagSafe, Qi2, and Google Pixel (Pixelsnap). The stated up-to output requires a compatible device and the included high-power car charger.
• Active thermoelectric (TEC) cooling helps remove heat from the phone during charging.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone & CB Mic Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
CB Radio Microphone Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH MAGNETIC PHONE MOUNT COMPATIBLE WITH MAGSAFE & CB RADIO MICROPHONE HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed CB Radio Microphone & magnetic (MagSafe) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With Dual MagSafe Phone Mounts

Included: TRAXX™ Toyota 4Runner Dash Bracket
Dual MagSafe Phone Holder Kit
Installation Hardware
Documentation
For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold.
PLEASE NOTE: This magnetic phone mount does NOT include any charging capabilities.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH MAGNETIC PHONE MOUNT COMPATIBLE WITH MAGSAFE
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed dual magnetic (MagSafe) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• PHONE HOLDER COMPATIBLE WITH MAGSAFE Whether you have the latest device or a phone case compatible with MagSafe, the newly designed magnetic phone mount with 20mm ball offers an ultra-secure, convenient attachment solution that is both no-slip and non-marring. For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold. PLEASE NOTE: This magnetic phone mount does NOT include any charging capabilities.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone, Midland MXT Magnetic Radio Mount, & GoPro Action Camera Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
GoPro/Action Camera Holder Kit
Installation Hardware
Documentation
Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH PHONE, MIDLAND MAGNETIC RADIO MICROPHONE & GOPRO/ACTION CAMERA MOUNT
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket Midland Magnetic Radio Mic, GoPro/Action Camera & phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• MIDLAND MAGNETIC MOUNT Made from billet aluminum, this CB radio mic holder is both simple and stylish. Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio. This simple upgrade transforms your OEM Midland MXT into a robust magnetic mounting system.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone, GoPro/Action Camera, & CB Mic Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
CB Radio Microphone Holder Kit
GoPro/Action Camera Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 20LITE BILLET SPRING-CRADLE PHONE MOUNT & CB RADIO MICROPHONE HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket CB Radio Microphone & phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone & GoPro/Action Camera Mount

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
GoPro/Action Camera Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 20LITE BILLET SPRING-CRADLE PHONE & GOPRO/ACTION CAMERA MOUNT
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket GoPro/Action Camera & phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone & Midland MXT Magnetic Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
Midland Magnetic Radio Microphone Holder Kit
Installation Hardware
Documentation
Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 20LITE BILLET SPRING-CRADLE PHONE MOUNT & MIDLAND MAGNETIC RADIO MICROPHONE HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket Midland magnetic radio microphone & phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• MIDLAND MAGNETIC MOUNT Made from billet aluminum, this CB radio mic holder is both simple and stylish. Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio. This simple upgrade transforms your OEM Midland MXT into a robust magnetic mounting system.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone & CB Mic Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
CB Radio Microphone Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 20LITE BILLET SPRING-CRADLE PHONE MOUNT & CB RADIO MICROPHONE HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket CB Radio Microphone & phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With Dual 20LITE Phone Mounts

Included: TRAXX™ Toyota 4Runner Dash Bracket
Two 20LITE Phone Holder Kits
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH 20LITE BILLET SPRING-CRADLE PHONE MOUNT
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracket & dual phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone, CB Radio Microphone, and GoPro/Action Cam Holders

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
GoPro/Action Camera Holder Kit
Midland Magnetic Radio Microphone Holder Kit
Installation Hardware
Documentation
Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER MAGSAFE PHONE, CB RADIO MICROPHONE & GOPRO/ACTION CAMERA HOLDER ASSAULT TRACK PICATINNY DASH BRACKET
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed GoPro/Action Camera Holder, CB Radio Mic & MagSafe phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• MIDLAND MAGNETIC MOUNT Made from billet aluminum, this CB radio mic holder is both simple and stylish. Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio. This simple upgrade transforms your OEM Midland MXT into a robust magnetic mounting system.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone, GoPro/Action Camera, & 2-in-1 CB Mic Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
GoPro/Action Camera Holder Kit
CB Radio Microphone Holder
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH MAGSAFE PHONE MOUNT, 2-IN-1 CB RADIO MICROPHONE & GOPRO/ACTION CAMERA HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed GoPro/Action Camera Holder, CB Radio Mic & magnetic (MagSafe) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone & GoPro/Action Camera Mount

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
GoPro/Action Camera Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER MAGNETIC MAGSAFE PHONE MOUNT & GOPRO/ACTION CAMERA HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed GoPro/Action Camera Holder & MagSafe phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone & Midland MXT Magnetic Radio Holder

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
Midland Magnetic Radio Microphone Holder Kit
Installation Hardware
Documentation
Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• 2010-2024 5TH GEN TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET WITH MAGNETIC PHONE MOUNT COMPATIBLE WITH MAGSAFE & MAGNETIC MIDLAND CB MICROPHONE HOLDER
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed Midland Magnetic Radio Microphone & magnetic (MagSafe) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• MIDLAND MAGNETIC MOUNT Made from billet aluminum, this CB radio mic holder is both simple and stylish. Featuring a unique two-part design, this holder includes a custom attachment that replaces the existing hanger button on the back of your Midland radio. This simple upgrade transforms your OEM Midland MXT into a robust magnetic mounting system.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Charging Phone Mount

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Wireless Charging Phone Holder Kit
Installation Hardware
Documentation
For devices that aren’t MagSafe-compatible, we've included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold with all the benefits of wireless charging.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• TOYOTA 4RUNNER MAGSAFE WIRELESS CHARGING PHONE MOUNT
• ASSAULT TRACK PICATINNY DASH BRACKET
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable dash bracketed MagSafe wireless charging phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• MAGSAFE WIRELESS CHARGING PHONE HOLDER
• Whether you have the latest MagSafe-compatible device or a MagSafe-compatible phone case, the newly designed MagSafe mount delivers secure and effortless attachment. Now featuring integrated charging capability. For devices that aren’t MagSafe-compatible, we've included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold with all the benefits of wireless charging.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS
• Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING
• While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• ALL METAL CONSTRUCTION
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket

Included: TRAXX™ Toyota 4Runner Dash Bracket
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• TOYOTA 4RUNNER ASSAULT TRACK PICATINNY DASH BRACKET
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash mount bracket on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS
• Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING
• While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• ALL METAL CONSTRUCTION
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With MagSafe Phone Mount

Included: TRAXX™ Toyota 4Runner Dash Bracket
MagSafe Phone Holder Kit
Installation Hardware
Documentation
For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold.
PLEASE NOTE: This magnetic phone mount does NOT include any charging capabilities.
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• TOYOTA 4RUNNER MAGSAFE PHONE MOUNT
• ASSAULT TRACK PICATINNY DASH BRACKET
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed magnetic (MagSafe) phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• PHONE HOLDER COMPATIBLE WITH MAGSAFE
• Whether you have the latest device or a phone case compatible with MagSafe, the newly designed magnetic phone mount with 20mm ball offers an ultra-secure, convenient attachment solution that is both no-slip and non-marring. For devices that aren’t compatible with MagSafe, we’ve included a sleek adhesive metal ring, allowing you to enjoy the same reliable magnetic hold. PLEASE NOTE: This magnetic phone mount does NOT include any charging capabilities.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS
• Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING
• While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• ALL METAL CONSTRUCTION
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

2010-2024 Toyota 4Runner Tackform Assault Track Picatinny Dash Bracket With 20LITE Phone Mount

Included: TRAXX™ Toyota 4Runner Dash Bracket
20LITE Phone Holder Kit
Installation Hardware
Documentation
For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install.

Fitting and compatibility: Toyota 4Runner
2010-2024
The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape.
No drilling is required!

• TOYOTA 4RUNNER PHONE MOUNT
• ASSAULT TRACK PICATINNY DASH BRACKET
• Upgrade your 2010-2024 Toyota 4Runner with the most rugged and dependable ALL-METAL dash bracketed phone mount setup on the market. Engineered to meet the demands of both on-and off-road drivers, each dash bracket is built from high-grade 6061-T6 aluminum and CNC machined for enhanced strength and durability. Using laser scanning technology, the dash brackets are precisely designed to match the complex contours of your dashboard, while the hardcoat anodized finish provides an OEM look and feel, blending with your vehicle's interior.
• UNIVERSAL PHONE COMPATIBILITY
• the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. The Tackform CNC billet aluminum phone holder utilizes a 20mm ball connection and is specifically designed for compatibility with the 20 Series Platform, revolving around the 20mm ball and socket system.
• INNOVATIVE CRADLE DESIGN
• Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The injection-molded, clip-in replaceable grips are not reliant on adhesive tape, which has often been a weak point. The spring mechanism is perfectly calibrated for vehicles, allowing for effortless phone insertion and removal without straining the mount base.
• DRILLING IS OPTIONAL - THE CHOICE IS YOURS
• Unlike other dash bracket offerings that require drilling into your dash for a secure fit, the Tackform Assault Track dash bracket is designed to provide a rock-solid hold on even the roughest terrains, using only adhesive tape. No drilling is required! For those who prefer a more traditional nut-and-bolt installation, the dash mount features pre-drilled through-holes in the legs and includes the necessary mounting hardware for a seamless install. The choice is yours!
• LIGHTNING FAST REPOSITIONING
• While 'grid-style' dash mounts are trendy, they can be a nightmare when trying to install, move, or reposition your mounting bases. With the intuitive Assault Track system, you’ll never have to fumble with nuts again. Capable of comfortably holding a variety of devices, the Assault Track system features a CNC-machined billet aluminum picatinny rail, allowing you to quickly add, remove, or reposition your mounts in seconds with nothing more than a house key.
• ALL METAL CONSTRUCTION
• 6061-T6 aluminium construction with an anodised finish. The finish helps protect against wear and corrosion.

Ask us about a compatible setup if you need help matching your vehicle, device or mounting components.