Milltek Sport

Milltek Ford Ranger Raptor 3.0 V6 Valved Cat-Back Exhaust | 2022+

Check vehicle fitment
£1,997.28 £2,349.74 Save £352.46 VAT included. Shipping calculated for your destination.

Available to Order

Not sure which one? Ask us to confirm fitment first →
Delivery, customs and taxes Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.

Lead times and urgent orders Check timing before you commit

Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.

High value order, handled personally

We confirm build spec, lead time and delivery arrangements with you before any money moves. Prefer to talk it through first?

Technical specifications
Specification Details
Manufacturer Milltek Sport
Material 304L stainless steel
Application Ford Ranger Raptor 3.0 V6 twin-turbo petrol, 2022+
Main pipe diameter 76.2 mm
Fitting estimate 2-3 hours (manufacturer estimate; actual booking agreed separately)
Tailpipe options GT-115 polished, Cerakote black, brushed titanium or burnt/blue titanium; JET-115 carbon
Tailpipe quantity Two
Valve operation Works with factory exhaust controls
E-mark approval Not E-marked
Calibration No remap required for the cat-back change alone
Included pipework Front connection, centre section, dual-valve assembly, left/right axle pipes and tailpipes

Give your Ranger Raptor a soundtrack to match the drive

Your Raptor should sound as enjoyable as it feels when you put your foot down. This Milltek valved cat-back brings more of the twin-turbo V6 into the experience, with 76.2 mm stainless pipework and two large tailpipes finishing the rear.

It replaces the exhaust behind the original catalytic converters and keeps the factory valve-control functionality. Choose the finish you want to see on your truck: polished stainless, Cerakote black, brushed titanium, burnt/blue titanium or carbon. The main exhaust is 304L stainless steel whichever finish you choose.

Keep control of the exhaust sound

The valved design works with your Raptor's factory exhaust controls, so you can change the sound to suit the drive. Its resonated centre section adds sound control rather than relying on an unrestricted pipe alone. That gives you more V6 character when you want to hear it, with valve operation still part of everyday driving.

Choose your tailpipe finish

For your 2022+ Ford Ranger Raptor 3.0 V6 twin-turbo petrol. The five finishes share the same valved 76.2 mm cat-back pipework.

Polished tips add a bright stainless finish; Cerakote black suits a darker rear end. Brushed titanium has a softer metallic finish, burnt/blue titanium adds colour, and carbon gives the outlets a different texture. These are tip choices on the same stainless exhaust, so choose the finish you want to see on your Raptor.

Tailpipe finish SKU Supplier Configuration
Polished GT-115 stainless steel SSXFD448 Ford Raptor 3.0 V6 - Valved Cat Back with GT-115 Polished Tips
Cerakote black GT-115 SSXFD449 Ford Raptor 3.0 V6 - Valved Cat Back with GT-115 Cerakote Black Tips
Brushed titanium GT-115 SSXFD450 Ford Raptor 3.0 V6 - Valved Cat Back with GT-115 Brushed Titanium Tips
Burnt/blue titanium GT-115 SSXFD451 Ford Raptor 3.0 V6 - Valved Cat Back with GT-115 Burnt/Blue Titanium Tips
Carbon JET-115 SSXFD452 Ford Raptor 3.0 V6 - Valved Cat Back with JET-115 Carbon Tips

What is included

The kit includes the front connecting pipe, centre section, dual-valve assembly, left and right axle pipes, left and right tailpipes, and two tips in your selected finish. The titanium and carbon choices change the tips; the main system remains 304L stainless steel.

Included components and quantities
Part number Included component Quantity System
MSFD294 RH Front Connecting Pipe 1 All options
MSFD295 Centre Section 1 All options
MSFD296 Dual Valve Assembly 1 All options
MSFD297 LH Axle Pipe 1 All options
MSFD298 RH Axle Pipe 1 All options
MSFD299 LH Tailpipe 1 All options
MSFD300 RH Tailpipe 1 All options
MSTIP250 Polished GT (round) 115 Exhaust Tip 2 SSXFD448
MSTIP251 Cerakote Black GT (round) 115 Exhaust Tip 2 SSXFD449
MSTIP252 Brushed Titanium GT (round) 115 Exhaust Tip 2 SSXFD450
MSTIP253 Burnt Titanium GT (round) 115 Exhaust Tip 2 SSXFD451
MSTIP244 Carbon Fibre Jet (round) 115 Exhaust Tip 2 SSXFD452

Custom tuning for your Ranger Raptor

If you want to take your Raptor further, our 2022-2026 Ranger Raptor 3.0 V6 custom ECU remap is available separately. We can discuss your exhaust, other upgrades and how you use the truck. For another model year, talk to us about tuning. A remap is not required for this cat-back change alone.

Fitting and care

Allow around 2-3 hours for professional fitting, including removal of the original system. Have the installer check valve operation, pipe clearances and the alignment of both tips, then recheck the joints after the first heat cycle. Clean the cool tips regularly with products suitable for their finish; bare-metal polish is not a general treatment for coated or carbon tips.

Vehicle fitment

Make Model, engine and application System SKU
Ford Ranger > Raptor 3.0 V6 twin-turbo petrol > 2022+ SSXFD448, SSXFD449, SSXFD450, SSXFD451, SSXFD452
Milltek technical documents

Technical specifications

Specification Details
Manufacturer Milltek Sport
Material 304L stainless steel
Application Ford Ranger Raptor 3.0 V6 twin-turbo petrol, 2022+
Main pipe diameter 76.2 mm
Fitting estimate 2-3 hours (manufacturer estimate; actual booking agreed separately)
Tailpipe options GT-115 polished, Cerakote black, brushed titanium or burnt/blue titanium; JET-115 carbon
Tailpipe quantity Two
Valve operation Works with factory exhaust controls
E-mark approval Not E-marked
Calibration No remap required for the cat-back change alone
Included pipework Front connection, centre section, dual-valve assembly, left/right axle pipes and tailpipes

Frequently asked questions

Will I keep the factory exhaust controls?

Yes. The valved system works with the Raptor's factory exhaust controls. The shared dual-valve assembly is part of all five options.

Does the tip finish change the exhaust sound?

All five options use the same valved cat-back layout. Choose polished, black, brushed titanium, burnt/blue titanium or carbon for the appearance you want; the main pipework is stainless steel in each case.

Do I need a remap?

No remap is required for this cat-back change alone. If you are adding other performance hardware, we can discuss the complete vehicle and a separate custom tune.

Does it replace the catalytic converters?

No. It replaces the exhaust behind the original catalysts. This is a cat-back system, rather than a downpipe or catalyst-bypass package.

Is this the diesel Raptor or F-150 system?

It is for the Ford Ranger Raptor with the 3.0 V6 twin-turbo petrol engine, from 2022. The earlier diesel Ranger Raptor and the F-150 Raptor use different systems.

What warranty comes with it?

Parts containing valves have Milltek cover for 2 years or 80,000 km; electronics have 2 years. Other qualifying parts have lifetime cover. The limited warranty is for the original purchaser, subject to its fitting, use and maintenance conditions, and excludes fitting labour. Keep your invoice and contact us if you need help with a claim.

Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Fitment first

Check fit before you order

Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.

Check vehicle fitment
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

Milltek Ford Ranger Raptor 3.0 V6 Valved Cat-Back Exhaust | 2022+
Milltek Ford Ranger Raptor 3.0 V6 Valved Cat-Back Exhaust | 2022+Ford Raptor 3.0 V6 - Valved Cat Back with GT-115 Polished Tips
Available to Order £1,997.28