ARB / Toyota Tundra XK50

ARB RD151 Front Air Locker | Toyota 8in IFS, 34 Spline

Check vehicle fitment
£1,128.73 VAT included. Shipping calculated for your destination.

Available to Order

Not sure which one? Ask us to confirm fitment first →
Delivery, customs and taxes Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.

Lead times and urgent orders Check timing before you commit

Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.

Fitment checked before you order

Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.

Technical specifications
Specification Details
Brand ARB
Manufacturer part number RD151
SKU XADLRD151
Differential / axle Toyota 8-inch IFS front, 53 mm carrier-bearing application
Vehicle application Matching Land Cruiser J200 / Tundra / Lexus LX570 front applications
Axle shafts 34 spline
Gear ratio All supported ratios, subject to the stated application exclusion
Operation Selectable, air-operated locking; open differential when disengaged
Ring-gear outside diameter 200mm [8 in]
Ring-gear inside diameter 134.0mm [5.28 in]
Ring-gear mounting 12 bolts on diameter 160mm [6.30 in]
Ring-gear bolt torque 135 Nm; professional setup value
Backlash 0.15-0.25 mm; professional setup value
Carrier bearings Listed in the ARB RD151 assembly parts sheet
Air supply CKMA12 single can operate one or two Air Lockers; compatible compressor purchased separately
Twin compressor option CKMTA12: higher-flow tyre inflation; separate 171503 manifold for Air Locker connections

Use more of your Toyota's front-wheel traction

When the front wheels meet different levels of grip, the RD151 gives the matching 34-spline Toyota IFS differential selectable locking. It is an upgrade for difficult off-road sections where an open differential allows one wheel to spin, while normal differential action remains available when you disengage it.

SKU: XADLRD151

Traction when you choose it

An open differential allows the wheels to turn at different speeds, which is useful for corners. On uneven ground, however, one wheel can spin while the other has grip available. Engaging the Air Locker locks the differential so both wheels turn at the same speed. That helps you make more use of the grip available on the axle.

The axle specification for RD151

RD151 is the 8-inch IFS, 34-spline front locker for the matching Land Cruiser J200, 2007-2021 Tundra and applicable Lexus LX570 installations. The 2016-onwards USA-market LX570 with eight-speed automatic and 3.307:1 front ratio is excluded. Different bearing and housing versions of the Toyota 8-inch IFS differential use different locker codes.

Normal differential action for the road

Disengaged, the Air Locker behaves as an open differential. You can enjoy normal road driving, then select locking for a low-traction off-road section. Engage it before the wheels are spinning, use it where the tyres can slip, and disengage it when turning or a firmer surface calls for normal differential action.

Air for your lockers and tyres

The ARB CKMA12 single onboard compressor can operate one or two Air Lockers, so it is a straightforward choice for a front-and-rear locker setup. It also supports tyre inflation with the appropriate hose kit. The compressor is purchased separately.

If you regularly air down for off-road driving, the ARB CKMTA12 twin onboard compressor is a worthwhile upgrade. Its higher airflow gets your tyres inflated faster, which is especially useful with larger tyres or when you are inflating several in a row. To connect Air Lockers to the twin, add the separate ARB 171503 compressor manifold kit. The ARB pump-up kit supplies the tyre-inflation hose and accessories.

Professional fitting

A differential specialist sets bearing preload, ring-and-pinion backlash, air sealing and line routing during installation. Accurate setup matters for quiet running, reliable engagement and the life of the axle. Bearings, seals and installation parts must match this differential.

The correct carrier bearings are identified in the RD151 parts sheet. Replacement CV retaining clips and axle-shaft oil seals may also be needed when the shafts are refitted.

Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Questions before you order

Frequently asked questions

What changes when I engage the locker?

Both wheels on that axle turn at the same speed, helping you use the grip available when one wheel would otherwise spin. It is especially useful for low-traction off-road sections.

How does it behave when switched off?

It operates as an open differential, allowing the wheels to turn at different speeds for normal cornering.

Does it include a compressor?

The compressor is sold separately. The ARB CKMA12 single onboard compressor can operate one or two Air Lockers.

Which axle does RD151 fit?

RD151 is the 8-inch IFS, 34-spline front locker for the matching Land Cruiser J200, 2007-2021 Tundra and applicable Lexus LX570 installations. The 2016-onwards USA-market LX570 with eight-speed automatic and 3.307:1 front ratio is excluded. Different bearing and housing versions of the Toyota 8-inch IFS differential use different locker codes.

Can it be fitted without setting up the differential?

Installation includes differential setup, bearing selection, backlash adjustment and air sealing. We recommend a differential specialist so the locker and the existing gearset are set up together.

Should I choose a single or twin compressor?

The CKMA12 single can operate a front and rear Air Locker. Choose the CKMTA12 twin if you also want higher airflow for regular tyre inflation. The twin needs the separate 171503 manifold for Air Locker connections; tyre inflation uses the appropriate hose kit.

Fitment first

Check fit before you order

Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.

Check vehicle fitment
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

ARB RD151 Front Air Locker | Toyota 8in IFS, 34 Spline
ARB RD151 Front Air Locker | Toyota 8in IFS, 34 Spline
Available to Order £1,128.73