Manta / Manta Performance Exhausts

Manta Ford Ranger PX2/PX3 3.2L Exhaust - Twin Black Side Tips, Sept 2016-2022

Check vehicle fitment
£1,800.00 VAT included. Shipping calculated for your destination.

Available to Order

Not sure which one? Ask us to confirm fitment first →
Delivery, customs and taxes Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.

Lead times and urgent orders Check timing before you commit

Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.

High value order, handled personally

We confirm build spec, lead time and delivery arrangements with you before any money moves. Prefer to talk it through first?

Black side-exit tips for your PX Ranger

Give your 3.2L Ranger a distinctive side view with Manta's twin black angle-cut tips. These stainless steel systems use a single 3-inch exhaust feeding twin 4-inch outlets, with a choice of Quiet DPF-back or Loud turbo-back configurations. They are for PX2 and PX3 3.2L CRD diesel dual-cab utes with a factory DPF from September 2016 through 2022.

SSMKFD0252T-B is the Quiet DPF-back choice. SSMKFD0273T-B and SSMKFD0274T-B are the Loud turbo-back choices, with and without a replacement catalyst respectively. All three have the black twin side-exit appearance; material and tip colour are not extra choices on this page.

Choose the sound and how much you replace

The DPF-back starts after the factory filter, retaining the DPF while changing the rear exhaust. It uses a centre pipe without a muffler, yet has a Quiet classification because the retained front equipment remains part of the sound. It is the restrained choice for a daily-driven or touring Ranger when the side-exit look is the main attraction.

Turbo-back replaces the exhaust from the turbocharger, including the DPF section. The lower-restriction path behind the turbo supports spool and throttle response, and the engine's power and torque potential with suitable calibration. On the 3-inch turbo-back SSMKFD0273T-B and SSMKFD0274T-B, helping hot exhaust gases leave the turbo more quickly can also help lower exhaust gas temperatures when towing under load. Both turbo-back options are Loud. The with-cat version includes a replacement catalyst; it does not keep the DPF.

Mandrel bends maintain the 3-inch pipe section through the curves. Stainless steel provides corrosion resistance for wet and muddy use, while the twin black tips give all three systems the same visual finish. The choice is the front assembly, DPF retention and sound, with the same black-tip finish on all three.

Choosing your PX2 or PX3 system

  1. Confirm the engine and build date - 3.2L CRD diesel Dual Cab, PX2 or PX3, factory-DPF models from September 2016-2022. A 2016 registration alone does not establish the correct front system.
  2. Decide whether to retain the DPF - SSMKFD0252T-B connects after it. Both turbo-back systems replace the DPF section and need appropriate ECU recalibration for the conversion.
  3. Choose the offered sound and front assembly - Quiet DPF-back, or Loud turbo-back with or without a replacement catalyst. Each uses stainless 3-inch single pipework and twin black 4-inch side tips.

Tuning your Ranger

A turbo-back conversion that removes the DPF needs appropriate ECU recalibration; DPF-back fitting alone does not make tuning compulsory. If you would like more from your Ranger, talk to us about our tuning services and tell us how you use it. Tuning is a separate purchase.

Fit the correct DPF or turbo connection

The DPF-back kit uses a front pipe to suit the standard DPF. The turbo-back with-cat kit uses the front assembly with sensor provisions and catalyst; the without-cat kit uses its corresponding sensor-provision engine pipe. Both replace the DPF section, so the calibration and intended use must be addressed with the installation.

The kits include the selected exhaust sections, twin black tip assembly and listed clamps, hanger, gaskets, fasteners, sealant and thread locker. All three use a centre pipe without a muffler. Professional fitting is recommended, particularly for sensor work, turbo-back conversions and clearance checks. DPF-removing turbo-back systems are for off-road or motorsport use; fitting a replacement catalyst is not proof of road approval.

Care for the black tips and pipework

Clean the tips gently once cool and avoid abrasive cleaners on the black finish. Check joints, clamps, mounts and clearances after installation and after off-road contact, and remove accumulated mud and road salt.

Manta's limited warranty for stainless steel exhaust kits and components is 10 years from the invoice date. Fair wear, cosmetic deterioration, alteration, abuse and parts fitted with exhaust heat wrap are excluded. Catalyst failure on a vehicle with aftermarket forced induction is also excluded. Associated labour and freight are excluded from MPI's defect remedy. See the manufacturer warranty terms.

Technical specifications

Specification Details
Brand Manta
Product type DPF-back or turbo-back exhaust with twin black side tips
Vehicle Ford Ranger PX2/PX3 3.2L CRD diesel dual-cab ute
Build scope September 2016-2022 factory-DPF models
Material Stainless steel, black tips
Main pipework 3-inch single, mandrel-bent
Tip assembly 3-inch inlet; twin 4-inch outlets with inner cones and angle-cut ends
Exit Side exit; not two full-length exhaust pipes
Centre section Without muffler in all three kits
DPF-back SSMKFD0252T-B, Quiet, retains standard DPF
Turbo-back with cat SSMKFD0273T-B, Loud, replacement catalyst; DPF removed
Turbo-back without cat SSMKFD0274T-B, Loud; DPF removed
Kit contents Selected exhaust sections, twin tip assembly and listed fitting parts
Tuning Appropriate ECU recalibration for DPF-removing turbo-back conversion; separate purchase
Use DPF-removing turbo-back versions are for off-road/motorsport use; no automatic road approval
Manufacturer warranty 10 years for stainless steel Manta kits/components, subject to terms

Exhaust options

SKU System Pipework Material Sound
SSMKFD0252T-B DPF-back 3-inch single Stainless Steel (Black Tips) Quiet
SSMKFD0273T-B Turbo-back with catalytic converter(s) 3-inch single Stainless Steel (Black Tips) Loud
SSMKFD0274T-B Turbo-back without catalytic converters 3-inch single Stainless Steel (Black Tips) Loud

Frequently asked questions

Will it fit every 2016 PX2 3.2L Ranger?

The supported front-system scope starts with factory-DPF 3.2L CRD models from September 2016. Earlier non-DPF vehicles need their appropriate different system.

Does turbo-back with cats retain the DPF?

No. SSMKFD0273T-B has a replacement catalyst but replaces the DPF section. SSMKFD0252T-B is the DPF-back that keeps the standard filter.

Is it a full twin exhaust?

No. It is single 3-inch main pipework feeding a twin black tip assembly with two 4-inch outlets at the side.

Can I choose aluminised steel?

No. All three offered systems are stainless steel with black tips.

Which is the quieter choice?

SSMKFD0252T-B is classified Quiet with the DPF retained. Both turbo-back options are classified Loud.

Do the turbo-back options need tuning?

A conversion that removes the DPF needs appropriate ECU recalibration. DPF-back fitting alone does not make tuning compulsory, and our tuning service is a separate purchase.

Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Fitment first

Check fit before you order

Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.

Check vehicle fitment
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

Manta Ford Ranger PX2/PX3 3.2L Exhaust - Twin Black Side Tips, Sept 2016-2022
Manta Ford Ranger PX2/PX3 3.2L Exhaust - Twin Black Side Tips, Sept 2016-2022DPF Back / Stainless Steel / Black Tips / 3" Twin Exit
Available to Order £1,800.00