Manta / Manta Performance Exhausts

Manta Toyota Land Cruiser VDJ76 4.5L V8 Exhaust - Oct 2016-2025 DPF Models

Check vehicle fitment
£2,099.00 VAT included. Shipping calculated for your destination.

Available to Order

Not sure which one? Ask us to confirm fitment first →
Delivery, customs and taxes Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.

Lead times and urgent orders Check timing before you commit

Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.

High value order, handled personally

We confirm build spec, lead time and delivery arrangements with you before any money moves. Prefer to talk it through first?

More V8 character for your 76 Series

Make your 76 Series sound the way you want it to, with a Manta exhaust that suits the wagon's use. This stainless steel range is for the VDJ76 4.5L 1VD V8 turbo diesel built from October 2016 through 2025 with a factory DPF. The available systems are all single-exit, with 3-inch or 4-inch pipework and a choice of DPF-back or turbo-back.

For a restrained rear-exhaust change that keeps the factory DPF, start with the Quiet 3-inch SSMKTY0163. A Quiet 4-inch DPF-back with a muffler and a Medium 4-inch DPF-back without one are also offered, giving you a real choice without removing the filter.

Match the flow and sound to your wagon

A DPF-back changes the exhaust after the filter, so the DPF remains part of both the emissions equipment and the final sound. It is the sensible starting point when your aim is a different rear system and a more satisfying note with the factory filter retained.

Turbo-back systems replace the exhaust from the turbo, including the DPF section. Reducing restriction behind the turbo supports spool, throttle response and power and torque from a suitably calibrated engine. The with-cat versions contain a replacement catalyst, not the factory DPF. These conversions need appropriate ECU recalibration and are for off-road or motorsport use.

Stainless steel adds corrosion resistance for a wagon that spends its life on wet roads, muddy tracks or long trips. For daily use and touring, choose the actual Quiet, Medium or Loud classification you want; a larger pipe is not a substitute for choosing the right muffler. With a 4-inch system, rear suspension and loaded spring clearance also belong in the buying decision.

Choosing your VDJ76 system

  1. Start with the wagon - 4.5L V8 VDJ76, factory-DPF models from October 2016-2025. Earlier pre-DPF wagons use different front sections.
  2. Decide whether to keep the DPF - DPF-back retains it; turbo-back replaces it, even on systems with a replacement catalyst.
  3. Check the 4-inch suspension condition - a minimum 2-inch lift or rear airbags is recommended. It can fit standard suspension, but may contact the springs when heavily loaded.
  4. Choose the offered sound - 3-inch turbo-back has Quiet, Medium and Loud. The 4-inch combinations vary with system type; use the exact options below rather than assuming every sound is available.

Tuning your Land Cruiser

A turbo-back conversion that removes the DPF needs appropriate ECU recalibration; DPF-back fitting alone does not make tuning compulsory. If you would like more from your Land Cruiser, talk to us about our tuning services and tell us how you use it. Tuning is a separate purchase.

Give the 4-inch system room under load

For SSMKTY0365, SSMKTY0366, SSMKTY0367, SSMKTY0368, SSMKTY0369 and SSMKTY0370, Manta recommends a minimum 2-inch lift or rear airbags. These 4-inch systems fit standard suspension, but the exhaust may contact the springs if the wagon is heavily loaded. They suit both the factory rear bumper and a Kaymar rear bar.

The kits include the selected exhaust sections and matched fitting parts. DPF-back kits connect to the standard filter; turbo-back kits include the corresponding front assembly and sensor provisions. Have the fitter check joints, suspension travel, loaded clearances and underbody accessories. Professional fitting is recommended, especially for turbo-back conversions.

After fitting and before touring

Inspect joints, mounts and spring clearance after fitting and when the vehicle's usual load changes. Clean off mud and road salt when cool, and inspect for damage after off-road contact.

Manta's limited warranty for stainless steel exhaust kits and components is 10 years from the invoice date. Fair wear, cosmetic deterioration, alteration, abuse and parts fitted with exhaust heat wrap are excluded. Catalyst failure on a vehicle with aftermarket forced induction is also excluded. Associated labour and freight are excluded from MPI's defect remedy. See the manufacturer warranty terms.

Technical specifications

Specification Details
Brand Manta
Product type DPF-back or turbo-back exhaust kit
Vehicle Toyota Land Cruiser VDJ76 wagon
Engine 4.5L 1VD V8 turbo diesel
Build scope October 2016-2025 factory-DPF models
Material Stainless steel
Pipework and exit 3-inch or 4-inch single; no twin-exit choice
DPF-back sound 3-inch Quiet; 4-inch Quiet with muffler or Medium without muffler
Turbo-back sound 3-inch Quiet/Medium/Loud with or without catalyst; 4-inch combinations as listed below
DPF retention Only DPF-back retains the factory filter; a replacement catalyst is not a DPF
4-inch suspension SSMKTY0365/0366/0367/0368/0369/0370: minimum 2-inch lift or rear airbags recommended; standard suspension can contact springs when heavily loaded
4-inch rear compatibility Factory bumper and Kaymar rear bar, with loaded-clearance condition above
Kit contents Selected exhaust assemblies and matched fitting parts; front assembly/sensor provisions on turbo-back systems
Tuning Appropriate ECU recalibration for DPF-removing turbo-back conversions; separate purchase
Use DPF-removing turbo-back conversions are for off-road/motorsport use; no blanket road approval
Manufacturer warranty 10 years for stainless steel Manta kits/components, subject to terms

Exhaust options

SKU System Pipework Material Sound
SSMKTY0369 Turbo-back with catalytic converter(s) 4-inch single Stainless Steel Loud
SSMKTY0367 Turbo-back with catalytic converter(s) 4-inch single Stainless Steel Quiet
SSMKTY0164 Turbo-back with catalytic converter(s) 3-inch single Stainless Steel Quiet
SSMKTY0165 Turbo-back with catalytic converter(s) 3-inch single Stainless Steel Medium
SSMKTY0166 Turbo-back with catalytic converter(s) 3-inch single Stainless Steel Loud
SSMKTY0368 Turbo-back without catalytic converters 4-inch single Stainless Steel Medium
SSMKTY0370 Turbo-back without catalytic converters 4-inch single Stainless Steel Loud
SSMKTY0167 Turbo-back without catalytic converters 3-inch single Stainless Steel Quiet
SSMKTY0168 Turbo-back without catalytic converters 3-inch single Stainless Steel Medium
SSMKTY0169 Turbo-back without catalytic converters 3-inch single Stainless Steel Loud
SSMKTY0366 DPF-back 4-inch single Stainless Steel Medium
SSMKTY0365 DPF-back 4-inch single Stainless Steel Quiet
SSMKTY0163 DPF-back 3-inch single Stainless Steel Quiet

Frequently asked questions

Will turbo-back with a cat retain the factory DPF?

No. Turbo-back replaces the DPF section, including on the with-cat versions. Choose DPF-back to retain the factory filter.

Are there twin-exit versions?

No. All thirteen offered systems on this page have a single exit, in 3-inch or 4-inch pipework.

Do I need a lift for a 4-inch system?

Manta recommends a minimum 2-inch lift or rear airbags for SSMKTY0365-SSMKTY0370. The systems fit standard suspension, but may contact the springs under a heavy load.

Will the 4-inch system work with a Kaymar rear bar?

Yes. The six 4-inch systems SSMKTY0365-SSMKTY0370 suit both the factory rear bumper and a Kaymar rear bar. Manta recommends a minimum 2-inch lift or rear airbags; on standard suspension, the exhaust may contact the springs when heavily loaded.

Can it support further performance work?

The turbo-back options provide a freer exhaust path for a suitably calibrated engine. DPF-back is the rear-exhaust choice that keeps the standard DPF. Tell us about any existing hardware and your aims when discussing a separate tune.

Is a DPF-back automatically road approved?

It keeps the factory DPF, but that component retention is not a road-approval claim for the complete installation. The finished vehicle must meet the requirements for its intended use.

Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Fitment first

Check fit before you order

Model year, engine, drivetrain, hardware and existing modifications can all change what fits. Check the applications and supplier notes above, or send us your exact vehicle and setup before ordering.

Check vehicle fitment
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

Manta Toyota Land Cruiser VDJ76 4.5L V8 Exhaust - Oct 2016-2025 DPF Models
Manta Toyota Land Cruiser VDJ76 4.5L V8 Exhaust - Oct 2016-2025 DPF ModelsTurbo Back With CAT / 4" Single / Loud
Available to Order £2,099.00