Delivery, customs and taxes
Know the landed cost before you order
+
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.
Lead times and urgent orders
Check timing before you commit
+
Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.
Fitment checked before you order
Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.
Build your off-grid power around the equipment and comforts you want to use. The Fogstar Drift 48V 125Ah Gen2 provides a nominal 6,400Wh in a single 51.2V LiFePO4 battery, with a 150A BMS, Bluetooth monitoring and built-in heating for a properly designed 48V installation.
A complete 48V-class battery in one case
The 125Ah capacity is rated at 51.2V nominal, so it stores 6.4kWh despite having a lower Ah number than many 12V leisure batteries. That is why voltage matters when comparing capacity. This model measures 640 x 245 x 220 mm and weighs 50kg. Its charge and discharge limits are 150A; they belong to this exact model and should guide the inverter, wiring and protection you choose.
See how much charge you have left
Check state of charge, voltage, current, temperature and protection status in the free Fogstar Drift App for Android and iOS. Bluetooth connects your phone directly to the battery when you are within range, so you can keep an eye on your energy use while you are at camp.
The integrated 2A active balancer helps keep the internal cells at similar voltages, moving energy between them when needed. It is built into the battery management system, so there is no separate internal-cell balancing module to fit. It operates when cell voltage deviation exceeds 0.015V.
Match the battery to your inverter
CAN and RS485 communication give a compatible system access to battery information. Check the exact inverter model, supported protocol, cable and configuration before connecting it. If you are planning a new 48V installation, tell us which inverter you want to use and we can help you choose the appropriate battery arrangement.
Cold-weather charging
A cold morning does not have to put an end to your plans. The built-in heater uses incoming charge current to warm the cells before charging resumes at around 5°C. It only works when a suitable charger is connected and supplying current; it does not use the stored battery energy to keep itself warm. Allow for the warm-up period when planning winter charging.
Technical specifications
Specification
Details
Brand
Fogstar
Range / model
Drift Gen2 48V 125Ah Lithium Leisure Battery
Battery chemistry
Lithium iron phosphate (LiFePO4)
System voltage class
48V
Nominal voltage
51.2V
Capacity
125Ah
Nominal energy
6,400Wh; runtime depends on load, losses and reserve
Cells
Prismatic LiFePO4 cells
Battery management
150A BMS
Maximum discharge
150A (battery-side DC limit)
Maximum charging current
150A; size and set the charger for the battery and installation
Charging voltage
56.8V to 57.6V bulk/absorption range; 57.6V standard; 58.4V maximum
Rated cycle life
4,000 cycles at 80% depth of discharge; actual life varies with use and conditions
Monitoring
Built-in Bluetooth; free Fogstar Drift App for Android and iOS
Heating
Built-in; powered by incoming charge and warms cells before charging resumes around 5°C
Cell balancing
Integrated 2A active balancer
Battery communication
CAN / RS485; confirm the exact inverter and protocol before installation
Discharge control
Physical discharge/on-off control; use external isolation for storage
Dimensions
640 x 245 x 220 mm (L x W x H)
Weight
50kg
Case material
ABS plastic
Terminals
M8
Ingress protection
IP67 with intact seals and correct installation; protect from immersion and prolonged exposure
Charging temperature
0 to 55°C cell temperature; heater-equipped models warm cells before cold charging
Discharging temperature
-20 to 55°C
Battery banks
Up to 16 identical batteries in parallel; no series connection
Warranty
10-year manufacturer warranty for defects in materials/workmanship, subject to terms; original purchaser
What you get
One Fogstar Drift Gen2 48V 125Ah Lithium Leisure Battery. M8 terminal bolts are included.
Select Yes under Battery Bracket to add the mounting bracket, or No for the battery without the optional bracket. Both choices supply the same battery model.
Battery Bracket
Supplied
SKU
No
Battery without optional mounting bracket
Fog/Drift/48V/125
Yes
Battery with mounting bracket
Fog/Drift/48V/125/B
Charging equipment and the rest of the electrical installation are separate purchases.
Charging and installation
Use this as a 48V leisure or domestic battery and choose a lithium iron phosphate charge profile. Check the mains charger, solar controller and any DC-DC charging equipment against the voltage and current limits above. An alternator installation needs suitable charge control; a lead-acid charging programme is not automatically suitable for LiFePO4.
Measure the battery location and allow room for the terminals, cable bends, mounting hardware and access for disconnection. Secure the 50kg battery against movement and use correctly sized cables, fusing and an accessible isolator. Switch the battery output and main isolator off before making connections, and check polarity before commissioning.
The IP67-rated enclosure adds protection against dust and water ingress when seals and fittings are intact. Install it in a protected, ventilated location and keep it clear of standing water, flooding, saltwater and pressure washing.
For this M8 installation, the manual specifies 4 to 8Nm terminal torque and no more than two ring terminals per post. Use a suitable busbar or distribution block when the system needs more connections.
Looking after your battery
Store the battery in a cool, dry place at roughly 30% to 50% charge, with loads disconnected, and check or recharge it at least every three months. A battery switch or app setting is not complete electrical isolation, and the BMS cannot prevent indefinite storage discharge. Recharge after a low-voltage shutdown and keep the connections secure and clean.
Frequently asked questions
How long will it run my fridge and lights?
Start with the nominal 6,400Wh capacity and your appliances' daily energy use. A fridge cycles on and off, while lights, pumps and chargers add their own demand. Allow for inverter losses, temperature, battery age and a sensible reserve. Send us your appliance list if you would like help comparing battery sizes for your trips.
Can I use an inverter with this battery?
Yes, with a 48V-compatible inverter sized for the battery and installation. The battery's 150A maximum discharge is a DC limit, not an AC appliance wattage guarantee. Include the inverter's losses and appliance starting surge when checking the load, and use correctly rated cables and protection.
Can I add another battery later?
Up to 16 identical batteries can be connected in parallel for more capacity at the same nominal voltage. This 48V model must not be connected in series. Match model, voltage, capacity and age, balance the battery voltages before connection, and design the wiring, fusing and communication for the complete bank.
What does the warranty cover?
The 10-year manufacturer warranty covers defects in materials and workmanship under its terms. UK-based Fogstar technical support is also available. The warranty applies to the original purchaser, with proof of purchase and correct installation, use, maintenance and storage. Normal capacity ageing is not a manufacturing defect. The warranty version in force when you buy applies; read the Fogstar warranty terms for the full cover and exclusions.
For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.
Lead times and urgent orders
Check timing before you commit
Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.
Fitment first
Universal product - confirm the application
Check dimensions, mounting points, clearance and any wiring or hose requirements against your setup before ordering.
Universal fit
Need help with this product?
Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.