Tackform Enduro spring phone cradles – spring, damper and connection choices

Choose Tackform Enduro spring phone cradles – spring, damper and connection choices to mount a compatible device using the specified interface.

Choose your setup

1. Check the mounting surface or device interface and the listed dimensions.
2. Choose the supplied build and fitting position, then match the arm and connection where a choice is offered.
3. Select the available finish or accent colour. The selector lists the combinations you can order.

Supplied build and specifications

Enduro QLITE Phone Cradle | 1/4"-20 Tripod Compatible | Standard Spring Tension | Black

Fitting and compatibility: The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion & removal of mobile device without straining the mount base.
Clip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders.

• PLEASE NOTE: The QLITE cradle is part of the "Lite" series and offers standard spring tension. This level of tension is perfectly engineered for In-Vehicle, Semi-Truck, Light Off-Road, and Stationary use. We do offer heavier spring tension options with the "MAXX" series cradles. The MAXX series is engineered specifically for Extreme Off-Road, Open Top Driving, Motorcycle, SXS, ATV, and other demanding applications.
• ¼”-20 Tripod Compatible: Versatility at its best. The ¼”-20 threaded screw hole allows you to mount to both tripods and camera stands. This feature provides the flexibility to switch between various equipment with ease. Whether you're capturing stunning landscapes, recording a documentary, or setting up for a live stream, this Enduro QLITE Phone Cradle is your go-to accessory for reliable, stable support.
• Universal Phone Compatibility: the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Please check your device for proper fitment.
• Innovative Cradle Design: Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion & removal of mobile device without straining the mount base.
• Clip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. the Clip-In Grips address this issue.
• Cradle Pin Sleeves Eliminate Cradle Buzz: Cradle buzz is a common issue in many of the competitors' current products. These metal cradles feature steel pins that run through them to support internal compression springs. However, the metal-on-metal contact, combined with vibrations from vehicles or motorcycles, can result in an irritating buzzing sound. We've eliminated this problem in the Enduro cradles by 'sleeving' the pins, ensuring quiet operation.

Enduro 26LITE Phone Cradle | 26mm Ball | Light Spring tension | Black

Fitting and compatibility: **Clip-In Grips - Traditionally, the previous generation phone cradle used double sided 3M tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders.

• • CNC Machined Aluminum • Cradle Pin Sleeves Eliminates Cradle Buzz* • Compatible with 26mm Ball and Socket Parts • Compatible with Phones between 2.4" and 3.7" Wide and up to .6" Deep • Clip-in Grips** • Button Cutout on Rubber Grips • Spring Loaded Cradle • Standard spring tension (LITE Series) • Engineered for: In-Vehicle, Semi-Truck, Light Off Road use • Allows for single-handed insertion & removal of mobile device • OK for use with any length mounting arm.
• *Cradle buzz is a common issue on many current competitors' products and happened to some of the older discontinued products as well. These metal cradles have steel pins that run through them to support the internal compression springs. This metal on metal contact paired with some level of vibration in a vehicle or on a motorcycle could lead to an annoying buzzing sound. We've eliminated this issue on these cradle by "sleeving" the pins.
• **Clip-In Grips - Traditionally, the previous generation phone cradle used double sided 3M tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders. However, in high heat the double sided tape could come lose and the grips could peel away. the Clip-In Grips solve that problem.

Enduro Series™ Universal Phone Holder with 20mm Metal Ball & Optional Vibration Dampening

Fitting and compatibility: For this reason when you mount a MAXX Cradle on an arm longer than 3.5" you can experience slippage at the ball joint while inserting and removing a phone with a single hand.
If you are using this in an application that requires aggressive spring tension and requires an arm longer than 3.5" it's still possible.
Not recommended for use with arms longer than 3.5"**
***Clip-In Grips - Traditionally, the previous generation phone cradle used double sided 3M tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders.

• Enduro Series™ Phone Cradles 20LITE, 20MAXX, 20MAXX VIBE
• Shared Features
• CNC Machined Aluminum
• Cradle Pin Sleeves Eliminates Cradle Buzz*
• Compatible with 20mm Ball and Socket Parts
• Compatible with Phones between 2.4" and 3.7" Wide and up to .6" Deep
• Clip-in Grips***
• Button Cutout on Rubber Grips
• Spring Loaded Cradle
• 20LITE
• Standard spring tension
• Engineered for: In-Vehicle, Semi-Truck, Light Off Road use
• Allows for single-handed insertion & removal of mobile device
• OK for use with any length mounting arm.
• 20MAXX
• Heavy Spring Tension
• Engineered for: Extreme Off-Road, Open Top Driving.
• 20MAXX VIBE
• Vibration Dampening Mechanism
• Engineered for: Motorcycle, SXS
• Available in Black and Chrome
• *Cradle buzz is a common issue on many current competitors' products and happened to some of the older discontinued products as well. These metal cradles have steel pins that run through them to support the internal compression springs. This metal on metal contact paired with some level of vibration in a vehicle or on a motorcycle could lead to an annoying buzzing sound. We've eliminated this issue on these cradle by "sleeving" the pins.
• **Recommended Arm Length - The MAXX Cradle is designed with approximately twice the spring strength of the LITE cradle. For this reason when you mount a MAXX Cradle on an arm longer than 3.5" you can experience slippage at the ball joint while inserting and removing a phone with a single hand. If you are using this in an application that requires aggressive spring tension and requires an arm longer than 3.5" it's still possible. You will just have to use one hand to insert the phone while using your other hand to support the arm.
• ***Clip-In Grips - Traditionally, the previous generation phone cradle used double sided 3M tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders. However, in high heat the double sided tape could come lose and the grips could peel away. the Clip-In Grips solve that problem.

Enduro Series™ Phone Cradles | 25 Series ( 1" / B Sized )

Fitting and compatibility: For this reason when you mount a MAXX Cradle on a arm longer than 3.5" you can experience slipping at the ball joint while inserting and removing a cradle with a single hand.
If you are in an environment that requires the aggressive spring tension but you need an arm longer than 3.5" it's definitely OK, you just make have to use one hand to insert the phone, and the other hand to hold the mounting arm in place.
Not recommended for mount arms longer than 3.5"**
***Clip-In Grips - Traditionally the old phone cradles used double sided 3m tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders.

• Enduro Series™ Phone Cradle for 1" / B Sized Ball
• Shared Features
• CNC Machined Aluminum
• Cradle Pin Sleeves Eliminates Cradle Buzz*
• Compatible with 1", 25.4mm, B-Sized Ball and Socket Parts
• Compatible with Phones between 2.4" and 3.7" Wide and up to .6" Deep
• Clip-in Grips***
• Button Cutout on Rubber Grips
• Spring Loaded Cradle
• 25LITE
• Standard spring tension
• Engineered for: In-Vehicle, Semi-Truck, Light Off Road use
• Allows for single-handed insertion & removal of mobile device
• OK for use with any length mounting arm.
• 25MAXX
• Heavy Spring Tension
• Engineered for: Extreme Off-Road, Open Top Driving.
• 25MAXX VIBE
• Vibration Dampening Mechanism
• Engineered for: Motorcycle, SXS
• Available in Black and Chrome
• *Cradle buzz is a common issue on many current competitors products and happened to some of the older discontinued products as well. These metal cradles have steel pins that run through them to support the internal compression springs.. This metal on metal contact paired with some level of vibration in a vehicle or on a motorcycle could lead to an annoying buzzing sound. We've eliminated this issue on these cradle by "sleeving" the pins.
• **Recommended Arm Length - The MAXX Cradle is designed with approximately twice the spring strength as the LITE cradle. For this reason when you mount a MAXX Cradle on a arm longer than 3.5" you can experience slipping at the ball joint while inserting and removing a cradle with a single hand. If you are in an environment that requires the aggressive spring tension but you need an arm longer than 3.5" it's definitely OK, you just make have to use one hand to insert the phone, and the other hand to hold the mounting arm in place.
• ***Clip-In Grips - Traditionally the old phone cradles used double sided 3m tape to hold the grips onto the cradle, a method commonly used by other brands with similar looking holders. However, in high heat the double sided tape could come lose and the grips could peel away. the Clip-In Grips solve that problem.

Ask us about a compatible setup if you need help matching your vehicle, device or mounting components.