ARB / Battery Isolators

REDARC Smart Start SBI12 12V 100A Battery Isolator & Install Kit

Universal fit
£327.37 £363.74 Save £36.37 VAT included. Shipping calculated for your destination.

Available to Order

Not sure which one? Ask us to confirm fitment first →
Delivery, customs and taxes Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. Outside the UK, shipping is shown at checkout and local customs and taxes remain your responsibility.

Lead times and urgent orders Check timing before you commit

Some products are made to order, imported or custom built. If timing matters, contact us before ordering and we will confirm the expected delivery timeframe.

Fitment checked before you order

Send the vehicle, engine and current setup if you want us to confirm the exact application before checkout.

Technical specifications
Specification Details
Manufacturer REDARC
Manufacturer part number SBI12KIT
System voltage 12V
Continuous-current rating 100A
Maximum inrush current 400A
Connect threshold 13.2V; five-second delay
Disconnect threshold 12.6V; ten-second delay
Threshold tolerance ±0.1V
Standby current Less than 5mA
Function Automatic voltage-sensing battery isolator
Battery arrangement Suitable compatible lead-acid batteries; verify alternator operation
Isolator dimensions (L x W x H) 75 x 70 x 80mm
Isolator weight 200g
Supplied SBI12 plus pre-terminated installation cables, terminals and MTA 60A fuse equipment

Run your accessories from a second battery and protect your starting reserve

The REDARC Smart Start SBI12 automatically connects a suitable auxiliary battery when the starting battery is charging, then separates the batteries as the voltage falls. It is a straightforward way to manage a compatible 12V dual-battery system without remembering to operate a manual switch.

SKU: XEISBI12KIT

Automatic connection when charging is available

The isolator connects at 13.2V after a five-second delay and disconnects at 12.6V after a ten-second delay, with a ±0.1V voltage tolerance. This allows a compatible alternator system to charge the auxiliary battery while reducing the chance of accessory use drawing down the starting battery.

The LED provides an indication of the isolator's state. Its less-than-5mA standby draw keeps the isolator's own demand low when it is not active.

Choose for the electrical system

The SBI12 is rated at 100A continuous current, with a 400A maximum inrush rating. That is the isolator's capability, not a guarantee of the current your alternator will put into the battery. Cable size, fuse protection, alternator behaviour and battery requirements still determine the installation.

It is a voltage-sensing isolator, rather than a multi-stage DC-DC charger. Use it with compatible lead-acid battery arrangements and suitable alternator operation. For a regulated charge profile, lithium charging or a smart-alternator application that needs voltage boosting, the REDARC BCDC Core 25A is an alternative for protected in-cabin installation.

What is supplied

The SBI12KIT includes the SBI12 isolator, pre-terminated cables, ring terminals and MTA 60A fuse holders/fuses. The prepared connections make the planned installation easier without on-site cable crimping or soldering. Fit the components in accordance with the guide and retain correctly positioned battery-side fuse protection.

Protect the cables from heat, sharp edges and moving components. A correctly planned installation is what makes automatic battery management useful and dependable.

Technical specifications

Specification Details
Manufacturer REDARC
Manufacturer part number SBI12KIT
System voltage 12V
Continuous-current rating 100A
Maximum inrush current 400A
Connect threshold 13.2V; five-second delay
Disconnect threshold 12.6V; ten-second delay
Threshold tolerance ±0.1V
Standby current Less than 5mA
Function Automatic voltage-sensing battery isolator
Battery arrangement Suitable compatible lead-acid batteries; verify alternator operation
Isolator dimensions (L x W x H) 75 x 70 x 80mm
Isolator weight 200g
Supplied SBI12 plus pre-terminated installation cables, terminals and MTA 60A fuse equipment

Frequently asked questions

Is this a DC-DC charger?

No. It connects and separates compatible batteries according to voltage. A DC-DC charger also regulates the charging output and provides the selected charging profile.

Can it charge a lithium auxiliary battery?

Choose a suitable lithium-capable DC-DC charger instead, such as the BCDC Core for protected in-cabin installation, and match the charger to the battery's requirements.

Will it work with every smart alternator?

Not automatically. The alternator must hold the voltage needed for the isolator and battery arrangement. Use an appropriate DC-DC charger where the vehicle needs regulated auxiliary charging.

Are cables and fuses included?

Yes. The SBI12 self-install kit supplies the pre-terminated cables, terminals and MTA 60A fuse equipment described above.

Does the LED switch off as soon as I stop the engine?

Not necessarily. The isolator responds to battery voltage, which can remain above its disconnect level after the engine stops. It disconnects when the stated voltage condition is reached.

Delivery, customs and taxes

Know the landed cost before you order

For UK customers, prices include VAT, customs and delivery unless checkout states otherwise. For customers outside the UK, local customs and taxes remain your responsibility, and shipping is shown at checkout. If a shipping option is not available, email us and we will prepare a tailored quote.

Lead times and urgent orders

Check timing before you commit

Many of the products we sell are made to order, imported or custom built, so a lead time may apply. If you need a part urgently, contact us before ordering and we will confirm the expected delivery timeframe and process.

Fitment first

Universal product - confirm the application

Check dimensions, mounting points, clearance and any wiring or hose requirements against your setup before ordering.

Universal fit
Need help with this product?

Send us your vehicle, year, current setup and any fitting date, event, trip or deadline before ordering. We will help check fitment, product choice and timing.

REDARC Smart Start SBI12 12V 100A Battery Isolator & Install Kit
REDARC Smart Start SBI12 12V 100A Battery Isolator & Install Kit
Available to Order £327.37