ALMONT4WD Ford Next-Gen Ranger Raptor Airflow Front Skid Plate - Underbody Protection

ALMONT4WD Airflow Front Skid Plate for Next-Gen Ranger Raptor

The ALMONT4WD Airflow Front Skid Plate is a front underbody protection plate for the Next-Gen Ford Ranger Raptor, available for 3.0L petrol and 2.0L diesel variants. It is built for owners who want front-end armour against rocks, ruts and trail debris while retaining airflow around the lower front cooling area.

This is the airflow version of the ALMONT4WD front skid plate, making it the right choice when front protection and ventilation are both important to your build. It protects exposed lower components at the front of the vehicle without turning the front underside into a fully closed panel.

What This Front Skid Plate Protects

Off-road driving exposes the front underside of a Ranger Raptor to stone strikes, rutted tracks, sharp ledges and debris thrown up by the front tyres. A front skid plate helps create a stronger barrier between the ground and vulnerable components.

The ALMONT4WD Airflow Front Skid Plate is used for protection around the front radiator guard, front differential, engine, steering gearbox, front transmission and A/C condenser. For trail, expedition and mixed sport driving, it helps reduce the risk of front-end underbody damage when the vehicle is used away from smooth tarmac.

• Front-position underbody protection for the Next-Gen Ford Ranger Raptor
• Airflow design intended to support air movement around the lower front section
• Protection for key front underside areas exposed to rocks and debris
• Vehicle-specific variant options for 3.0L petrol and 2.0L diesel models
• Useful as the first step in a wider Ranger Raptor armour setup

Why Choose the Airflow Version

The airflow model is for buyers who want a front skid plate but do not want a fully closed design at the front underside. Its role is to combine front impact protection with an airflow-focused layout, which is particularly relevant around the cooling package and lower front-end components.

If you are comparing options, this Airflow version is the more ventilation-focused choice. If you are looking for the alternative front plate in the same vehicle ecosystem, compare it with the ALMONT4WD Ford Next-Gen Ranger Raptor Front Skid Plate.

For a broader underbody armour build, the ALMONT4WD Ford Next-Gen Ranger Raptor Full Underbody Plate Kit is the natural comparison when you want more than front protection alone.

Fitment and Variant Notes

This product is for the Ford Next-Gen Ranger Raptor, with separate variant options for the 3.0L petrol and 2.0L diesel models. Choose the variant that matches your engine before ordering.

• Next Gen Raptor - 3.0L Petrol: SKU PDFRA38RAPTOR -1
• Next Gen Raptor - 2.0L Diesel: SKU PDFRA38RAPTOR -2

Fitment should not be broadened to non-Raptor Ranger models, previous-generation vehicles or other platforms unless compatibility has been checked. If your vehicle has aftermarket front-end modifications, additional protection parts or non-standard underbody equipment, confirm suitability before fitting.

Technical Specifications

Where This Ranger Raptor Skid Plate Is Useful

This front skid plate suits Ranger Raptor owners preparing for rough tracks, work sites, green lanes, overland travel and mixed road-to-trail use. It is especially relevant when the front underside of the vehicle may contact loose rock, compacted ruts or raised centre sections on uneven terrain.

It can also form part of a staged protection plan. After protecting the front underside, many owners add rearward armour such as the ALMONT4WD Ford Next-Gen Ranger Raptor Fuel Tank Skid Plate to extend protection along the vehicle.

For side protection against ledges, banks and off-road body damage, the Hoonies Adrenaline Adjustable Rock Sliders for Ford Ranger Raptor are a practical complementary upgrade.

Before Ordering

Check your engine variant carefully, as the product is sold with separate options for the 3.0L petrol and 2.0L diesel Ranger Raptor. Also consider how the vehicle is used. Manufacturer guidance indicates this front skid plate is not indicated for intensive dune use, so vehicles being prepared for repeated sand or high-load desert work should be discussed with Hoonies Adrenaline before ordering.

For stated normal and mixed sport use conditions, manufacturer guidance also indicates that additional ATF coolers for the ZF-10R80 automatic transmission are not required. If your build has unusual cooling demands, aftermarket transmission cooling parts or heavy expedition modifications, check the full setup before fitting.

Frequently Asked Questions

Is this the airflow front skid plate?

Yes. This is the ALMONT4WD Airflow Front Skid Plate, designed as the ventilation-focused front underbody protection option for the Next-Gen Ford Ranger Raptor.

Which Ranger Raptor variants can I select?

The available options are Next Gen Raptor - 3.0L Petrol and Next Gen Raptor - 2.0L Diesel. Select the variant that matches your vehicle before placing the order.

What areas does it help protect?

It is used to protect the front radiator guard, front differential, engine, steering gearbox, front transmission and A/C condenser from front underside impact and trail debris.

What is it made from?

The skid plate is made from 8 mm certified Duralumin AW5083 H111, with a published product weight of 18 kg.

Is it suitable for intensive dune driving?

Manufacturer guidance states that it is not indicated for intensive dune use. For repeated sand, desert or high-heat use, contact Hoonies Adrenaline to discuss the most suitable protection setup.

Should I buy this or the full underbody kit?

Choose this front skid plate if your priority is front-end underside protection with an airflow-focused design. Choose the full underbody plate kit if you want broader coverage across more of the vehicle underside.

Payment Terms

For UK customers, the price shown includes VAT, customs charges and supplier shipping costs, so you can order with confidence and avoid unexpected customs bills after purchase. If any customs-related questions or issues arise, Hoonies Adrenaline will handle them for you.

For orders outside the UK, please contact us through the contact form before purchasing so we can prepare a personalised quote.

Shipping and Lead Times

We aim to keep strong stock availability across the products we sell, but imported, specialist and custom-order items may have a lead time. If you need an estimated delivery window before ordering, please contact us and we will be happy to check this for you.

If you place an order for an item that is currently out of stock or already on order with a supplier, Hoonies Adrenaline will contact you as soon as possible with an update.