ALMONT4WD Ford Next-Gen Ranger Raptor Front Skid Plate - Underbody Protection

ALMONT4WD Front Skid Plate For Ford Next-Gen Ranger Raptor

The ALMONT4WD Front Skid Plate is a vehicle-specific underbody protection plate for Ford Next-Gen Ranger Raptor owners who drive off road, travel over rutted tracks, or want stronger front-end protection before damaging terrain. It helps shield vulnerable front underside areas from rocks, trail debris and ground contact.

This is the front armour piece in the ALMONT4WD Ranger Raptor protection range. Choose the correct vehicle option for the Next Gen Raptor - 3.0L Petrol or Next Gen Raptor - 2.0L Diesel variant before ordering.

What The Front Skid Plate Helps Protect

The front underside of a 4x4 is often the first area exposed when climbing ledges, crossing deep ruts or dropping into uneven ground. A skid plate adds a sacrificial barrier between the terrain and critical front-end components, helping reduce the risk of trip-ending damage.

This ALMONT4WD front skid plate is designed to protect the following areas on the Ranger Raptor:

• Front radiator guard
• Front differential
• Engine area
• Steering gearbox
• Front transmission area
• A/C condenser

For drivers using the Ranger Raptor as a performance 4x4, trail vehicle or overland base, that front-end coverage is the key reason to choose this specific plate.

Who This Ranger Raptor Underbody Armour Is For

This front skid plate is suited to owners who want targeted protection at the front of the vehicle rather than a cosmetic accessory. It is a practical upgrade for mixed road and off-road use, including green lanes, rocky tracks, work sites, camping routes and general adventure travel.

• Useful for protecting low front components from trail debris
• Suited to Ranger Raptor builds that see regular off-road use
• Appropriate for owners building protection in stages
• Relevant for mixed sport driving rather than intensive dune use

The role of this part is clear: it covers the front section, not the rear axle, fuel tank or side sill areas.

Choosing Front Protection Or A Wider ALMONT4WD Setup

If your main concern is front radiator, drivetrain, steering and condenser protection, this front skid plate is the right starting point. If you want to extend coverage further under the vehicle, it can be considered alongside the Gearbox & Transfer Skid Plate and the Rear Differential Skid Plate.

For a single purchase covering multiple underbody areas, compare it with the ALMONT4WD Full Underbody Plate Kit. If you are comparing ALMONT4WD front plate variants, also check the Front Skid Plate - Airflow.

Compatibility And Variant Notes

This product is for the Ford Next-Gen Ranger Raptor platform, with selectable variants for 3.0L petrol and 2.0L diesel models. Match the engine variant and SKU to your vehicle rather than assuming compatibility with other Ranger models.

• Next Gen Raptor - 3.0L Petrol, SKU PDFRA28Raptor 1
• Next Gen Raptor - 2.0L Diesel, SKU PDFRA28Raptor 2

Ranger Raptor model-year references can vary by market, so confirm the Next-Gen / P703 platform and selected engine option before purchase. Contact Hoonies Adrenaline if you are comparing against an earlier Ranger Raptor or a non-Raptor Ranger.

Technical Specifications

Installation And Before Ordering Checks

Professional installation is recommended if you are not familiar with underbody protection, access clearances or vehicle-specific mounting points. Before fitting, inspect the vehicle underside and check for non-standard accessories that may affect placement.

Because no included accessories or hardware details are confirmed here, ask Hoonies Adrenaline before checkout if you need to verify fitting hardware, instructions or compatibility with other aftermarket parts. After off-road use, it is good practice to inspect underbody armour for impact marks and check that all mounting points remain secure.

Frequently Asked Questions

Will this fit my Ford Ranger Raptor?

It is for the Ford Next-Gen Ranger Raptor, with variants for 3.0L petrol and 2.0L diesel models. Select the engine option that matches your vehicle.

Is this a full underbody protection kit?

No. This is the front skid plate. It focuses on front underside protection rather than gearbox, rear differential, fuel tank or shock absorber coverage.

What is the skid plate made from?

The confirmed material is Duralumin AW5083 H111, with an 8 mm plate thickness.

Which components does it help protect?

It is designed to protect the front radiator guard, front differential, engine area, steering gearbox, front transmission area and A/C condenser.

Is it suitable for dune driving?

The manufacturer use context is normal mixed sport driving. It is not the recommended choice for intensive dune use or setups requiring additional ATF coolers.

Are fitting hardware and accessories included?

Included accessories are not confirmed. Contact Hoonies Adrenaline before ordering if you need to verify hardware or installation details.

Payment Terms

For UK customers, the price shown includes VAT, customs charges and supplier shipping costs, so you can order with confidence and avoid unexpected customs bills after purchase. If any customs-related questions or issues arise, Hoonies Adrenaline will handle them for you.

For orders outside the UK, please contact us through the contact form before purchasing so we can prepare a personalised quote.

Shipping and Lead Times

We aim to keep strong stock availability across the products we sell, but imported, specialist and custom-order items may have a lead time. If you need an estimated delivery window before ordering, please contact us and we will be happy to check this for you.

If you place an order for an item that is currently out of stock or already on order with a supplier, Hoonies Adrenaline will contact you as soon as possible with an update.