Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A tougher front end for your Tacoma adventures
The HoneyBadger brings a substantial steel bumper, a winch mount and a distinctive look to your Tacoma. It is a practical upgrade when you want recovery equipment and better off-road lighting built around a front end that still follows your truck neatly.
SKU: F687382730103
Protection and a close fit
The bumper uses 1/8-inch outer steel plating with removable 1/8-inch aluminium accent panels. Hammer Black and Satin Black finishes bring out the shape, while reinforced 1-inch steel clevis mounts accept soft shackles.
Choose your off-road lighting
Choose a 30-inch straight or radius light bar, or up to six cube lights, in the centre. Each side panel takes a RIGID 10-inch LED light. The universal light-mount kit is supplied; lights and wiring are separate.
Recovery equipment and factory features
A winch mount is part of the bumper, ready for a compatible winch and its fitting equipment. The soft-shackle clevis mounts add another recovery attachment option for your Tacoma.
Fitting your bumper
The installation includes cutting the original fascia, inner liners and plastic above the frame horns, removing the frame extensions and cutting the driver-side factory tow hook flush with the front crossmember. Fender flares are trimmed where applicable. If using a TRD Pro skid plate, the lower bumper mounting tab also needs cutting as shown. Professional fitting is recommended.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| F687382730103 | Toyota | Tacoma N300 | 2016-2023 | - |
Applications shown are for North American-spec vehicles.
Talk to us about compatible lights, recovery equipment and fitting your bumper.
Technical specifications
| Specification | Details |
|---|---|
| SKU | F687382730103 |
| Outer plating | 1/8-inch steel |
| Accent panels | Removable 1/8-inch aluminium |
| Recovery | Reinforced 1-inch steel clevis mounts for soft shackles |
| Winch provision | Winch mount |
| Centre lighting | 30-inch straight or radius bar, or up to six cube lights |
| Side lighting | RIGID 10-inch LED mounts |
| Fitting | Fascia and liner cutting, frame-extension removal and driver-side tow-hook cutting |
| TRD Pro skid plate | Additional lower mounting-tab cutting required when used |
| Finish | Hammer Black powder coat with Satin Black panels |
| Country of manufacture | USA |
Frequently asked questions
Can I fit a winch?
Yes. A winch mount is included in the bumper design. The winch and its fitting equipment are separate.
Does it work with a TRD Pro skid plate?
Yes, the TRD Pro skid plate fits with the additional lower mounting-tab cut and bolt arrangement shown in the fitting guide.
Does fitting involve permanent work?
Yes. It includes fascia cutting and cutting the driver-side factory tow hook flush with the crossmember, alongside liner trimming and frame-extension removal.
