Know the landed cost before you order
Prices include VAT and customs. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
A tougher rear bumper for your Bronco trips
The Bomber gives your Bronco a close-fitting steel rear bumper with a clean two-tone finish. It adds rear lighting positions and soft-shackle attachment points while keeping the factory tow hooks and parking sensors useful.
SKU: R230141090103
Protection and a close fit
The plate-steel structure is finished in Hammer Black with Satin Black aluminium panels. It follows the rear bodywork closely for a neat appearance, with the original tow hooks sitting below the bumper.
Choose your off-road lighting
Two side cube-light mounting positions let you add illumination behind the Bronco when unloading equipment or reversing off-road. Lights and wiring are separate purchases.
Recovery equipment and factory features
An included number-plate relocation bracket uses the spare-carrier mounting points, placing the plate above the bumper and reusing the OEM number-plate light. Reinforced clevis mounts accept soft shackles, and the factory parking sensors are retained.
Fitting your bumper
Transferring the factory number-plate light and inner sensor bezel requires the tab modifications shown in the guide. The passenger-side sensor-harness covering is opened for reach. On the driver side, the inner sensor wires are cut and extended with the supplied three one-foot sections of 20-gauge wire, connectors and loom. We recommend professional installation.
Vehicle fitment
| SKU | Make | Model | Years | Details |
|---|---|---|---|---|
| R230141090103 | Ford | Bronco | 2021-2026 | - |
Applications shown are for North American-spec vehicles.
Talk to us about compatible lights, recovery equipment and fitting your bumper.
Technical specifications
| Specification | Details |
|---|---|
| SKU | R230141090103 |
| Construction | Plate steel with aluminium accent panels |
| Lighting | Two side cube-light mounts |
| Recovery | Reinforced clevis mounts for soft shackles |
| Included bracket | Number-plate relocation, using spare-carrier mounting points |
| Factory equipment | Tow hooks, parking sensors and number-plate light retained |
| Sensor fitting | Driver-side inner sensor wires cut and extended with supplied three one-foot 20-gauge sections |
| Other fitting | Number-plate light and inner bezel tab modification; passenger-side harness covering opened |
| Finish | Hammer Black powder coat with Satin Black panels |
| Country of manufacture | USA |
Frequently asked questions
Does it include a number-plate bracket?
Yes. The included relocation bracket uses the spare-carrier mounting points and reuses the factory number-plate light.
Does sensor transfer require extending wires?
Yes. The driver-side inner sensor wires are cut and extended with the supplied three one-foot sections of 20-gauge wire, connectors and loom. The passenger-side harness covering is opened for reach.
Can I keep the factory tow hooks?
Yes. The OEM tow hooks remain below the bumper and can be used as intended.
