Know the landed cost before you order
Prices include VAT. Shipping is charged separately and calculated at checkout for your destination. If no shipping option is shown, contact us for a quote before ordering.
Choose the headers for your small-block Ford build
Upgrade your Fox Body's 8.2-deck 302 with Kooks long tube headers matched to the cylinder heads listed below. The 1-7/8-inch primaries lead to 3-inch outlets, and stock-pattern adapter plates are included.
SKU: 10112400
Adapter plates for the heads
The plates provide the 2" inline stock bolt pattern and stock port height. Use the exact head families below, along with the required tubular K-member, starter and steering shaft.
Fit them around the engine position
Lowering mounts and engine placement affect header clearance and ground clearance; mount shims may be necessary. A Stifflers transmission crossmember is recommended. Gaskets and the fitting bolt kit are included.
Tuning for your exhaust upgrade
We recommend tuning with every header installation so the calibration suits your new headers, complete exhaust and fuel. Talk to us to discuss the right tuning route for your vehicle.
Vehicle fitment
| Years | Vehicle / trim | Engine | Applicable SKU | Fitting conditions |
|---|---|---|---|---|
| 1979-1993 | Ford Mustang | 302 SBF, 8.2 deck | 10112400 | 302 SBF, 8.2 deck; supported stock-port-height heads; adapter plates and exact chassis parts |
| 1979-1986 | Mercury Capri | 302 SBF, 8.2 deck | 10112400 | 302 SBF, 8.2 deck; supported stock-port-height heads; adapter plates and exact chassis parts |
Intended use
10112400: Competition, off-road and track use only. Not for use on public roads.
The competition-use waiver applies to 10112400.
Ordering and delivery
Estimated lead time is 4-6 weeks. Delivery may be faster depending on stock levels. Shipping is charged separately.
Technical specifications
| Specification | Details |
|---|---|
| SKU | 10112400 |
| Chassis / engine | 1979-1993 Mustang; 302 SBF, 8.2 deck |
| Material / sizes | 16-gauge 304 stainless; 1-7/8" primaries, 3" outlets |
| Head interface | Adapter plates; 2" inline stock pattern; stock port height |
| Supported heads | Edelbrock Victor Jr.; AFR 165 / 185; Trick Flow TFS-Twisted Wedge; SVO GT40; Brodix St. / 5.0; Dart 170 / 195 |
| Required parts | UPR / BMR Standard Series tubular K-member; Powermaster 9503 or similar starter; Flaming River steering shaft |
| Recommended | Stifflers transmission crossmember |
| Contents | Adapter plates, gaskets and bolt kit |
| Clearance | Engine position / lowering mounts affect fit; shimming may be needed |
Frequently asked questions
Is this for a Coyote engine conversion?
This SKU is for the 302 small-block Ford and the listed cylinder heads.
Are the adapter plates part of the purchase?
Yes. This is the adapter-plate version for the stock-pattern head arrangement.
