{"product_id":"tackform-mount-can-am","title":"Tackform Can-Am Spyder center-riser mounting kits","description":"\u003cp\u003eChoose Tackform Can-Am Spyder center-riser mounting kits to give your devices a mounting point matched to the listed vehicle and fitting position.\u003c\/p\u003e\u003ch2\u003eChoose your setup\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eCheck the listed vehicle and equipment requirements.\u003c\/li\u003e\n\u003cli\u003eChoose the supplied build and fitting position, then match the arm and connection where a choice is offered.\u003c\/li\u003e\n\u003cli\u003eSelect the available finish or accent colour. The selector lists the combinations you can order.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eVehicle fitment\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eApplication\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eEquipment and exclusions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan-Am Spyder F3 Year not specified by manufacturer\u003c\/td\u003e\n\u003ctd\u003eExcluded equipment: Tri-Axis handlebars; Required equipment: factory M10 center-riser bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan-Am Spyder RS 2013+\u003c\/td\u003e\n\u003ctd\u003eExcluded equipment: Tri-Axis handlebars; Required equipment: factory M10 center-riser bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan-Am Spyder ST Year not specified by manufacturer\u003c\/td\u003e\n\u003ctd\u003eExcluded equipment: Tri-Axis handlebars; Required equipment: factory M10 center-riser bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan-Am Spyder RT Year not specified by manufacturer\u003c\/td\u003e\n\u003ctd\u003eExcluded equipment: Tri-Axis handlebars; Required equipment: factory M10 center-riser bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMatch the vehicle, dashboard or mounting-point equipment and fitting position before ordering. Any trim, screen, handlebar or factory-equipment exclusions below also apply.\u003c\/p\u003e\u003ch2\u003eSupplied build and specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eAvailable choice\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFitting position\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSupplied hardware\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM11-DR-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Drink Holder | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm; Connection and arm: Standard\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Drink Holder | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM11-ADV-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm; Connection and arm: Standard\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM00-AM-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm; Connection and arm: Standard\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM00-ADV-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm; Connection and arm: Standard\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM11-AM-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm; Connection and arm: Standard\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM11-20M-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm; Connection and arm: Mount Type: Standard Motorcycle Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM11-20MV-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm; Connection and arm: Mount Type: Vibration Dampening Motorcycle Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM00-20M-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm; Connection and arm: Mount Type: Standard Motorcycle Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMM00-20MV-RT\u003c\/td\u003e\n\u003ctd\u003eSupplied build: Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm; Connection and arm: Mount Type: Vibration Dampening Motorcycle Mount\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eBlack Can-Am Drink Holder | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003eAdditionally, the included trimmable retention ring can be customized for the perfect fit, ensuring your drink is securely held even in the roughest terrain.\u003cbr\u003eBlack knobs are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Dual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration.\u003cbr\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003eMetal Construction: the drink holder boasts an all-metal, three-piece aluminum enclosure, providing unmatched durability. This innovative design allows for easy removal and replacement of the rubber net and retention ring, should the need arise.\u003c\/li\u003e\n\u003cli\u003eWide Capacity Range: Featuring a spacious mouth opening, the drink holder design accommodates containers up to 3.25” in diameter. From bottled sports drinks to canned beverages of various sizes, the contoured rubber net expands to snugly grip any beverage of your choice. Additionally, the included trimmable retention ring can be customized for the perfect fit, ensuring your drink is securely held even in the roughest terrain.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eDual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration. Dual thumbscrews allow you to quickly loosen\/tighten the ball and socket joints which allows for unlimited positioning. This arm will not break, bend, or boogie on you. It will stay right where you left it.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knobs are included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlack Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003e2 Power Connection Options: The Adventure phone cradle can be powered by either USB connection (USB charging cable included) or hardwired directly to your battery (SAE cable included).\u003cbr\u003eThis kit includes additional mounting components that provide you with the flexibility to convert this platform to better suit any shorter length mounting applications.\u003cbr\u003eBlack knobs are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Dual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration.\u003cbr\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003eWith a straightforward 12V DC input requirement, this mount integrates into your ATV\/SXS's power system, ensuring convenient and hassle-free charging while you ride.\u003cbr\u003eMost factory ATV\/SXS USB ports do not meet this requirement so hardwiring to the battery is the preferred installation for ATV\/SXS.\u003cbr\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders.\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNote: Samsung Galaxy, Google Pixel, \u0026amp; other Android devices charge wirelessly at a maximum of 10W. Apple devices charge wirelessly at a maximum of 7.5W. Thick protective phone cases may degrade charging efficiency.\u003c\/li\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003eVibration Dampening Phone Holder: ATV\/SXS vibrations have been known to adversely affect the image stabilization mechanism in some new smartphones. the Adventure cradle reduces high frequency vibrations transferred from your ATV\/SXS to your phone, reducing the chance of damaging your camera.\u003c\/li\u003e\n\u003cli\u003eWireless Charging: The wireless charging feature of the Adventure phone cradle is compatible with all prevailing wireless charging modes: 15W, 10W, 7.5W, and 5W. With a straightforward 12V DC input requirement, this mount integrates into your ATV\/SXS's power system, ensuring convenient and hassle-free charging while you ride. Stay powered up and connected wherever your journey takes you.\u003c\/li\u003e\n\u003cli\u003eUniversal Phone Compatibility: The Adventure Cradle is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.6\" wide, 0.6\" thick, and 7.2\" tall. Please check your device for proper fitment.\u003c\/li\u003e\n\u003cli\u003e2 Power Connection Options: The Adventure phone cradle can be powered by either USB connection (USB charging cable included) or hardwired directly to your battery (SAE cable included). If you are utilizing a USB port for your power connection, please make sure it supports fast charging and has a 3A output. Most factory ATV\/SXS USB ports do not meet this requirement so hardwiring to the battery is the preferred installation for ATV\/SXS. When connecting to a ATV\/SXS battery, please ensure the voltage remains under 16V.\u003c\/li\u003e\n\u003cli\u003eTackform lists IP66 protection against dust and high-pressure water jets. Manufacturer-stated test conditions are 26.4 gallons per minute at 14.5 psi, from approximately 9.84 feet, for at least 3 minutes.\u003c\/li\u003e\n\u003cli\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. the Clip-In Grips address this issue.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eShort Reach Conversion: All of the long reach motorcycle mounts can be converted to short reach if necessary. This kit includes additional mounting components that provide you with the flexibility to convert this platform to better suit any shorter length mounting applications.\u003c\/li\u003e\n\u003cli\u003eDual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration. Dual thumbscrews allow you to quickly loosen\/tighten the ball and socket joints which allows for unlimited positioning. This arm will not break, bend, or boogie on you. It will stay right where you left it.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knobs are included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlack Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003eBlack knob included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Can-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003ePerfect for GPS and Tuner Devices: Compatible with Dynojet and Garmin Zumo, for example, these popular manufacturers utilize an AMPS pattern on many of their devices, which can be mounted to your ATV\/SXS using the AMPS Bar Clamp mounting kits. Due to the widespread use of AMPS hole patterns by many manufacturers, please check your specific device to ensure it has the industry-standard AMPS hole pattern of 30mm x 38mm for proper fitment.\u003c\/li\u003e\n\u003cli\u003eIndustry-Standard AMPS Pattern: Crafted from high-quality 6061-T6 Aluminum, the AMPS mount adheres to the industry standard hole pattern of 30mm x 38mm (1.181” x 1.496”). The mounting holes themselves accept M4, M5, 10-24, 10-32, #8 plastic screws, and various other self-threading screws with a diameter of up to 5.2mm.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knob included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlack Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003e2 Power Connection Options: The Adventure phone cradle can be powered by either USB connection (USB charging cable included) or hardwired directly to your battery (SAE cable included).\u003cbr\u003eBlack knob included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Can-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003eWith a straightforward 12V DC input requirement, this mount integrates into your ATV\/SXS's power system, ensuring convenient and hassle-free charging while you ride.\u003cbr\u003eMost factory ATV\/SXS USB ports do not meet this requirement so hardwiring to the battery is the preferred installation for ATV\/SXS.\u003cbr\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders.\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNote: Samsung Galaxy, Google Pixel, \u0026amp; other Android devices charge wirelessly at a maximum of 10W. Apple devices charge wirelessly at a maximum of 7.5W. Thick protective phone cases may degrade charging efficiency.\u003c\/li\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003eVibration Dampening Phone Holder: ATV\/SXS vibrations have been known to adversely affect the image stabilization mechanism in some new smartphones. the Adventure cradle reduces high frequency vibrations transferred from your ATV\/SXS to your phone, reducing the chance of damaging your camera.\u003c\/li\u003e\n\u003cli\u003eWireless Charging: The wireless charging feature of the Adventure phone cradle is compatible with all prevailing wireless charging modes: 15W, 10W, 7.5W, and 5W. With a straightforward 12V DC input requirement, this mount integrates into your ATV\/SXS's power system, ensuring convenient and hassle-free charging while you ride. Stay powered up and connected wherever your journey takes you.\u003c\/li\u003e\n\u003cli\u003eUniversal Phone Compatibility: The Adventure Cradle is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.6\" wide, 0.6\" thick, and 7.2\" tall. Please check your device for proper fitment.\u003c\/li\u003e\n\u003cli\u003e2 Power Connection Options: The Adventure phone cradle can be powered by either USB connection (USB charging cable included) or hardwired directly to your battery (SAE cable included). If you are utilizing a USB port for your power connection, please make sure it supports fast charging and has a 3A output. Most factory ATV\/SXS USB ports do not meet this requirement so hardwiring to the battery is the preferred installation for ATV\/SXS. When connecting to a ATV\/SXS battery, please ensure the voltage remains under 16V.\u003c\/li\u003e\n\u003cli\u003eTackform lists IP66 protection against dust and high-pressure water jets. Manufacturer-stated test conditions are 26.4 gallons per minute at 14.5 psi, from approximately 9.84 feet, for at least 3 minutes.\u003c\/li\u003e\n\u003cli\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. the Clip-In Grips address this issue.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized 6061-T6 Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knob included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlack Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003eThis kit includes additional mounting components that provide you with the flexibility to convert this platform to better suit any shorter length mounting applications.\u003cbr\u003eBlack knobs are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Dual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration.\u003cbr\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003ePerfect for GPS and Tuner Devices: Compatible with Dynojet and Garmin Zumo, for example, these popular manufacturers utilize an AMPS pattern on many of their devices, which can be mounted to your ATV\/SXS using the AMPS Bar Clamp mounting kits. Due to the widespread use of AMPS hole patterns by many manufacturers, please check your specific device to ensure it has the industry-standard AMPS hole pattern of 30mm x 38mm for proper fitment.\u003c\/li\u003e\n\u003cli\u003eIndustry-Standard AMPS Pattern: Crafted from high-quality 6061-T6 Aluminum, the AMPS mount adheres to the industry standard hole pattern of 30mm x 38mm (1.181” x 1.496”). The mounting holes themselves accept M4, M5, 10-24, 10-32, #8 plastic screws, and various other self-threading screws with a diameter of up to 5.2mm.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eShort Reach Conversion: All of the long reach motorcycle mounts can be converted to short reach if necessary. This kit includes additional mounting components that provide you with the flexibility to convert this platform to better suit any shorter length mounting applications.\u003c\/li\u003e\n\u003cli\u003eDual Socket Perfection: Although we have shorter arms available, the 3.5\" metal arm provides solid support while minimizing vibration. Dual thumbscrews allow you to quickly loosen\/tighten the ball and socket joints which allows for unlimited positioning. This arm will not break, bend, or boogie on you. It will stay right where you left it.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knobs are included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlack Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003cbr\u003eBlack knob included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and compatibility:\u003c\/strong\u003e Can-Am Spyder F3 Models without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RS Models (2013+) without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder ST without Tri-Axis Handlebars\u003cbr\u003eCan-Am Spyder RT without Tri-Axis Handlebars\u003cbr\u003eThe spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion \u0026amp; removal of mobile device without straining the mount base.\u003cbr\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders.\u003cbr\u003ePlease Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003eCan-Am Spyder F3 Models without Tri-Axis Handlebars Can-Am Spyder RS Models (2013+) without Tri-Axis Handlebars Can-Am Spyder ST without Tri-Axis Handlebars Can-Am Spyder RT without Tri-Axis Handlebars\u003c\/li\u003e\n\u003cli\u003ePlease Note:\u003c\/li\u003e\n\u003cli\u003e*The 20MAXX and 20MAXX VIBE phone cradles are part of the \"MAXX\" series and offer Heavy-Duty spring tension. This level of tension is specifically engineered for Motorcycle, Extreme Off-Road, SXS, ATV, Open Top Driving, and other demanding applications.\u003c\/li\u003e\n\u003cli\u003eSpyder Handlebar Center Riser Mount: the innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using the high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.\u003c\/li\u003e\n\u003cli\u003eUniversal Phone Compatibility: the phone holder is designed to work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7\" wide and 0.6\" thick. Please check your device for proper fitment.\u003c\/li\u003e\n\u003cli\u003e(Optional) Vibration Dampening Phone Holder: ATV\/SXS vibrations have been known to adversely affect the image stabilization mechanism in some new smartphones. the Enduro 20MAXX VIBE cradle reduces high frequency vibrations transferred from your ATV\/SXS to your phone, reducing the chance of damaging your camera.\u003c\/li\u003e\n\u003cli\u003eInnovative Cradle Design: Experience the difference with the specially designed cradle. Unlike standard spring cradles, the octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion \u0026amp; removal of mobile device without straining the mount base.\u003c\/li\u003e\n\u003cli\u003eClip-In Grips: Traditionally, the previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. the Clip-In Grips address this issue.\u003c\/li\u003e\n\u003cli\u003eCradle Pin Sleeves Eliminate Cradle Buzz: Cradle buzz is a common issue in many of the competitors' current products. These metal cradles feature steel pins that run through them to support internal compression springs. However, the metal-on-metal contact, combined with vibrations from vehicles or motorcycles, can result in an irritating buzzing sound. We've eliminated this problem in the Enduro cradles by 'sleeving' the pins, ensuring quiet operation.\u003c\/li\u003e\n\u003cli\u003ePremium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.\u003c\/li\u003e\n\u003cli\u003eColor Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knob included.\u003c\/li\u003e\n\u003cli\u003eTackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. Compatible with other 20mm products. Please Note: Not suitable for 25.4mm \/ 1” \/ B-Sized balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003eAsk us about a compatible setup\u003c\/a\u003e if you need help matching your vehicle, device or mounting components.\u003c\/p\u003e","brand":"Tackform","offers":[{"title":"Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm \/ Mount Type: Standard Motorcycle Mount","offer_id":56554518774102,"sku":"MM00-20M-RT","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm \/ Mount Type: Vibration Dampening Motorcycle Mount","offer_id":56554518806870,"sku":"MM00-20MV-RT","price":75.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm \/ Standard","offer_id":56554518839638,"sku":"MM00-ADV-RT","price":140.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | Short Reach Arm \/ Standard","offer_id":56554518872406,"sku":"MM00-AM-RT","price":50.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm \/ Mount Type: Standard Motorcycle Mount","offer_id":56554518905174,"sku":"MM11-20M-RT","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm \/ Mount Type: Vibration Dampening Motorcycle Mount","offer_id":56554518937942,"sku":"MM11-20MV-RT","price":85.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Adventure Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm \/ Standard","offer_id":56554518970710,"sku":"MM11-ADV-RT","price":150.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am AMPS Mount | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm \/ Standard","offer_id":56554519003478,"sku":"MM11-AM-RT","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"Black Can-Am Drink Holder | Spyder Center Riser Mount - M10 Bolt | 3.5\" DuraLock™ Arm \/ Standard","offer_id":56554519036246,"sku":"MM11-DR-RT","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/MAIN_MM11-20M-RTMotorcycleMirrorMountPhoneCradle_0196e7d7-1aea-42c5-9ffd-1939e0083363.jpg?v=1794169577","url":"https:\/\/hooniesadrenaline.co.uk\/products\/tackform-mount-can-am","provider":"Hoonies Adrenaline","version":"1.0","type":"link"}