{"products":[{"id":11178297262422,"title":"Almont Toyota 4Runner N210 And Land Cruiser Prado KDJ120\/KDJ125 Front Skid Plate","handle":"almont-toyota-4runner-n210-kdj120-kdj125-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe 4Runner N210 and Prado KDJ120\/125 share their platform, and they share the same weak moment: a nose full of expensive hardware arriving at rock steps, rut walls and gravel spray before anything else on the truck. This Almont plate covers the front underside of the Toyota 4Runner N210 (2002-2008) and Toyota Land Cruiser Prado KDJ120\/KDJ125 in 8 mm HeavyDuty certified EN AW-5083 H111 duralumin, laser-cut in Spain and bolted to the original chassis holes on steel brackets. Strikes land on plate, the truck drives home, and the panel between you and a big bill is one you can unbolt and replace. Extend the cover with the \u003ca href=\"\/products\/almont-kdj-120-125-front-arm-skid-plate-kit-2-piece-kit-fj-cruiser-front-arm-skid-plate-2-piece-kit\"\u003efront arm kit\u003c\/a\u003e, or the \u003ca href=\"\/products\/almont-kdj-120-125-man-aut-gearbox-and-transfer-skid-plate-v6-engine-gasoline\"\u003eV6 petrol gearbox plate\u003c\/a\u003e on petrol trucks.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4Runner N210 imports and Prado 120s being built for lanes, trails and touring\u003c\/li\u003e\n\u003cli\u003ePlating the nose first - the end of the truck that gets hit most\u003c\/li\u003e\n\u003cli\u003ePetrol V6 and diesel builds alike across the shared platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, made in Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDT12A8RUNNER\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota 4Runner N210 2002-2008; Toyota Land Cruiser Prado KDJ120\/KDJ125\u003c\/li\u003e\n\u003cli\u003eMaterial: EN AW-5083 H111 duralumin, certified, 8 mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded Items: steel brackets and pre-installed bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm your model, year and bumper with us before ordering - bumper-specific Prado versions also exist if you run an aftermarket front end\u003c\/li\u003e\n\u003cli\u003eA winch can be fitted before or after the plate\u003c\/li\u003e\n\u003cli\u003eNot supported with body lifts or modified chassis mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT12A8RUNNER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota 4Runner N210 (2002-2008); Land Cruiser Prado KDJ120\/KDJ125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes one plate really fit both the 4Runner and the Prado?\u003c\/h3\u003e\u003cp\u003eYes - the N210 and KDJ120\/125 share the platform, so the front underside and chassis mounting points line up. One part number covers both.\u003c\/p\u003e\u003ch3\u003eI run an ARB or other aftermarket bumper - still the right plate?\u003c\/h3\u003e\u003cp\u003ePossibly not: Almont cuts bumper-matched Prado front plates, including an ARB version with connect kit. Tell us your bumper and we will point you to the correct plate.\u003c\/p\u003e\u003ch3\u003eWhat protects the rest of the driveline?\u003c\/h3\u003e\u003cp\u003eAlmont's gearbox and transfer plates cover the middle of the truck - the V6 petrol version is in the store, and we can spec the right one for your engine.\u003c\/p\u003e","published_at":"2026-08-13T11:08:43+01:00","created_at":"2026-08-13T10:47:22+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-land-cruiser-prado","make:toyota","type:skid-plate"],"variants":[{"id":54976480936278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDT12A8RUNNER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"859.32","grams":17500,"compare_at_price":null,"position":1,"product_id":11178297262422,"created_at":"2026-08-13T10:47:24+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83686293832022,"created_at":"2026-08-13T10:47:22+01:00","position":1,"updated_at":"2026-08-13T10:47:25+01:00","product_id":11178297262422,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/pdt12a-pdt1215b.webp?v=1786614445","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11156046086486,"title":"Almont Toyota 4Runner N120\/N130 Transmission Skid Plate","handle":"almont-toyota-4runner-n120-n130-transmission-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA second-generation 4Runner still out on the lanes is a truck worth looking after, and the transmission slung under its middle is the part a straddled rock or hard rut crest finds first. This Almont plate covers the transmission on the Toyota 4Runner N120\/N130, 1990-1995, in 6 mm certified EN AW-5083 H111 duralumin. Almont's mounting for this part is linked: the front protection must be fitted for this plate to mount as designed, so plan the two together and the whole front half of a thirty-year-old truck gains modern, laser-cut cover. Grounding then marks a plate you can replace instead of a casing you may never source again. For the later 4Runner N210, see the \u003ca href=\"\/products\/almont-toyota-4runner-n210-kdj120-kdj125-front-skid-plate\"\u003eN210 and Prado KDJ120\/125 front plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClassic N120\/N130 4Runners still driven off-road, not stored\u003c\/li\u003e\n\u003cli\u003eOwners protecting a drivetrain with thin parts supply in the UK\u003c\/li\u003e\n\u003cli\u003eBuilding linked front-plus-transmission cover in one plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, made in Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: transmission skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDT04B6\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota 4Runner N120\/N130, 1990-1995\u003c\/li\u003e\n\u003cli\u003eMaterial: EN AW-5083 H111 duralumin, certified, 6 mm SportDuty\u003c\/li\u003e\n\u003cli\u003eRequired: Almont front protection fitted, for the linked mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe front protection must be installed for this plate's linked mounting - ask us to pair the correct front plate with your order\u003c\/li\u003e\n\u003cli\u003eOn vehicles this age, check chassis mounting holes and threads are sound before fitting\u003c\/li\u003e\n\u003cli\u003eConfirm your model and year with us before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eTransmission skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT04B6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota 4Runner N120\/N130, 1990-1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrerequisite\u003c\/td\u003e\n\u003ctd\u003eAlmont front protection fitted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eCan I fit this plate on its own?\u003c\/h3\u003e\u003cp\u003eNo - Almont's mounting for this part links to the front protection, which needs to be in place. Order the pair together and fit front first; we can spec both for your truck.\u003c\/p\u003e\u003ch3\u003eIs fitting realistic on a 1990s chassis?\u003c\/h3\u003e\u003cp\u003eThe plate uses the original chassis holes and threads, so the main job is checking those mounting points are clean and sound first. If a thread has suffered, sort it before fitting day.\u003c\/p\u003e","published_at":"2026-07-31T00:04:29+01:00","created_at":"2026-07-31T00:02:41+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","make:toyota","type:skid-plate"],"variants":[{"id":54851985899862,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDT04B6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"481.32","grams":16500,"compare_at_price":null,"position":1,"product_id":11156046086486,"created_at":"2026-07-31T00:02:41+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11156046020950,"title":"Almont Toyota 4Runner, Fortuner And Tacoma Front Skid Plate","handle":"almont-toyota-4runner-fortuner-tacoma-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe 4Runner, Fortuner and Tacoma share Toyota's tough body-on-frame bones, and all three lead with a front underside that meets rock steps, rut walls and flying gravel head on. This Almont plate puts 8 mm HeavyDuty certified EN AW-5083 H111 duralumin under the nose, offered for the 4Runner N280 4.0 V6, Fortuner 2.5\/3.0 D-4D and Tacoma N300. These models sell across very different markets with different underbody details, so the one non-negotiable step is a pre-order check of your exact model, year and market build - after that, the strikes that used to reach the front underside stop at laser-cut plate. Round out the rear with the \u003ca href=\"\/products\/almont-toyota-rear-differential-skid-plate\"\u003eToyota rear differential plate\u003c\/a\u003e, which covers the 4Runner and Tacoma among others.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4Runner, Fortuner and Tacoma owners taking body-on-frame trucks onto real terrain\u003c\/li\u003e\n\u003cli\u003eImported trucks in the UK being built for laning and touring\u003c\/li\u003e\n\u003cli\u003eFitting heavy-vehicle-grade 8 mm plate at the most-struck end of the truck\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, made in Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDT15AR8RUNNER\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota 4Runner N280 4.0 V6, Fortuner 2.5\/3.0 D-4D, Tacoma N300 - confirm build before ordering\u003c\/li\u003e\n\u003cli\u003eMaterial: EN AW-5083 H111 duralumin, certified, 8 mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded Items: steel brackets and pre-installed bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSend us your model, year, engine and market build before ordering - underbody layouts differ between regions on these trucks\u003c\/li\u003e\n\u003cli\u003ePlates mount to original chassis holes with the supplied steel brackets\u003c\/li\u003e\n\u003cli\u003eNot supported with body lifts or modified chassis mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT15AR8RUNNER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota 4Runner N280 4.0 V6; Fortuner 2.5\/3.0 D-4D; Tacoma N300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy the emphasis on checking before ordering?\u003c\/h3\u003e\u003cp\u003eBecause these three models span several markets and build variations, we confirm each order against your exact truck rather than shipping on a maybe. Send the registration or VIN and we do the rest.\u003c\/p\u003e\u003ch3\u003eWill it fit around a winch or aftermarket bumper?\u003c\/h3\u003e\u003cp\u003eAlmont supports winches and cuts bumper-specific plates for many vehicles. Tell us your front-end setup and we will confirm whether this plate or a bumper-matched version is right.\u003c\/p\u003e\u003ch3\u003eIs my earlier 4Runner covered?\u003c\/h3\u003e\u003cp\u003eThis plate is offered for the N280 generation. Earlier trucks have their own parts - the N210 front plate and N120\/N130 transmission plate are both in the store.\u003c\/p\u003e","published_at":"2026-07-31T08:18:27+01:00","created_at":"2026-07-31T00:02:40+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-fortuner","fits:toyota-tacoma","make:toyota","type:skid-plate"],"variants":[{"id":54851985834326,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDT15AR8RUNNER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"859.32","grams":19500,"compare_at_price":null,"position":1,"product_id":11156046020950,"created_at":"2026-07-31T00:02:40+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83243623711062,"created_at":"2026-07-31T00:02:41+01:00","position":1,"updated_at":"2026-07-31T00:02:43+01:00","product_id":11156046020950,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDT15AR8-NO-KDSS-Toyota-KDJ150-155_50f4aa0e-0cb8-4934-bf5d-563abd8085d7.webp?v=1785452563","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149779009878,"title":"Almont Toyota Rear Differential Skid Plate","handle":"almont-toyota-rear-differential-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe rear differential housing is the lowest point on the back axle, and it stops on obstacles rather than sliding over them. One hard rock strike can mean seals, bearings or a housing - none of them trailside fixes. This Almont plate wraps the rear diff in 8 mm HeavyDuty certified EN AW-5083 H111 duralumin at 8 kg, and one part covers a remarkable spread of Toyotas: Land Cruiser KZJ\/KDJ 90\/95, Prado KDJ 120\/125, KDJ 150\/155 and GDJ 180\/185 (no-KDSS vehicles), Hilux D4D Vigo and Revo, FJ Cruiser BU09\/BU04, 4Runner N210 and N280, Tacoma and Tundra. It finishes the driveline run behind the \u003ca href=\"\/products\/almont-kdj-120-125-man-aut-gearbox-and-transfer-skid-plate-kdj-150-155-man-aut-gearbox-and-transfer-skid-plate-gdj-180-185-man-aut-gearbox-and-transfer-skid-plate\"\u003ePrado gearbox plate\u003c\/a\u003e or \u003ca href=\"\/products\/almont-kzj-kdj-90-gearbox-and-transfer-skid-plate\"\u003e90\/95 transmission plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRock-crawling, ledgy laning and riverbed routes where the rear axle grounds hardest\u003c\/li\u003e\n\u003cli\u003eOwners standardising one diff guard across several Toyotas\u003c\/li\u003e\n\u003cli\u003eFinishing underside coverage after front, transmission and tank plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, made in Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: rear differential skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDT12DIF8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: twelve Toyota models - full list in the table below\u003c\/li\u003e\n\u003cli\u003eMaterial: EN AW-5083 H111 duralumin, certified, 8 mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOn KDJ 150\/155 and GDJ 180\/185 the plate applies to no-KDSS vehicles - confirm your specification first\u003c\/li\u003e\n\u003cli\u003eSome Almont rear differential plates mount via a TIG-welded bracket; confirm the mounting method for your model with us before booking fitting\u003c\/li\u003e\n\u003cli\u003eCheck your exact model, year and market build before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear differential skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT12DIF8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota Land Cruiser 90\/95, KDJ 120\/125, KDJ 150\/155 no KDSS, GDJ 180\/185 no KDSS, Hilux D4D Vigo\/Revo, FJ Cruiser BU09\/BU04, 4Runner N210\/N280, Tacoma, Tundra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eMy Prado has KDSS - can I fit it?\u003c\/h3\u003e\u003cp\u003eFor the KDJ 150\/155 and GDJ 180\/185 this plate applies to vehicles without KDSS. If your truck has KDSS, ask us before ordering and we will check the right route for it.\u003c\/p\u003e\u003ch3\u003eDoes fitting involve welding?\u003c\/h3\u003e\u003cp\u003eSeveral Almont rear diff plates attach with a bracket TIG-welded to the differential rather than bolts alone. Confirm the method for your exact model with us first, and plan a fitter who can weld if needed.\u003c\/p\u003e\u003ch3\u003eIs one plate really right for a Hilux and a Land Cruiser?\u003c\/h3\u003e\u003cp\u003eAlmont cuts this part to suit the rear diff across the models named above - which is exactly why the pre-order model and year check matters.\u003c\/p\u003e","published_at":"2026-07-30T22:29:58+01:00","created_at":"2026-07-29T16:25:40+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-fj-cruiser","fits:toyota-land-cruiser-prado","fits:toyota-tacoma","fits:toyota-tundra","make:toyota","type:skid-plate"],"variants":[{"id":54838189883734,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDT12DIF8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"257.04","grams":9000,"compare_at_price":null,"position":1,"product_id":11149779009878,"created_at":"2026-07-29T16:25:40+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83223363912022,"created_at":"2026-07-29T16:25:40+01:00","position":1,"updated_at":"2026-07-29T16:25:42+01:00","product_id":11149779009878,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDT12DIF.webp?v=1785338742","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149771669846,"title":"Almont Toyota KDJ120\/KDJ150\/GDJ180 Long Body and 4Runner N210\/N280 Fuel Tank Skid Plate","handle":"almont-kdj-120-fuel-tank-skid-plate-long-body-kdj-150-fuel-tank-skid-plate-long-body-gdj-180-fuel-tank-skid-plate-long-body-4runner-n210-fuel-tank-skid-plate-4runner-n280-fuel-tank","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eAcross the Prado 120\/150 family and two 4Runner generations, the fuel tank rides in the same exposed spot - low, mid-wheelbase, exactly where crests and rut ridges drag. This Almont plate covers it on long-body KDJ120, KDJ150 and GDJ180 Prados and on the 4Runner N210 and N280, with 12 kg of laser-cut 6 mm EN AW-5083 H111 duralumin bolted to the factory chassis points. A holed tank ends a trip on the spot; this plate exists so it stays a scrape story instead.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLong-body (5-door) Prado 120\/150-family trucks and 4Runner N210\/N280s\u003c\/li\u003e\n\u003cli\u003eTouring rigs whose range depends on an intact tank\u003c\/li\u003e\n\u003cli\u003eClosing the gap between transmission cover and the rear axle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD\u003c\/li\u003e\n\u003cli\u003eProduct Type: fuel tank skid plate, long-body version\u003c\/li\u003e\n\u003cli\u003eSKU: PDT1215DL6\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota KDJ120, KDJ150 and GDJ180 long body; 4Runner N210 and N280\u003c\/li\u003e\n\u003cli\u003eMaterial: 6 mm EN AW-5083 H111 duralumin, SportDuty grade\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis is the long-body cut. Short-body (3-door) KDJ125, KDJ155 and GDJ185 trucks take Almont's separate short-body tank plate, so check your body style first.\u003c\/li\u003e\n\u003cli\u003eOriginal tank only - a larger long-range replacement tank rules any Almont tank plate out.\u003c\/li\u003e\n\u003cli\u003eAhead of this plate, the \u003ca href=\"\/products\/almont-fj-cruiser-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n210-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n280-manual-automatic-gearbox-and-transfer\"\u003e8 mm gearbox and transfer plate\u003c\/a\u003e covers the N210\/N280 centre line, and the \u003ca href=\"\/products\/almont-kdj-120-dual-skid-plates-rear-shocks-2uni-kdj-150-dual-skid-plates-rear-shocks-2uni-gdj-180-185-dual-skid-plates-rear-shocks-2uni-fj-cruiser-dual-skid-plates-rear-shocks-2-p\"\u003erear shock plates\u003c\/a\u003e finish the job behind it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate (long body)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT1215DL6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota KDJ120 \/ KDJ150 \/ GDJ180 long body; 4Runner N210 \/ N280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow do I know if my truck is long body?\u003c\/h3\u003e\u003cp\u003eFive-door Prados are the long body; the three-door KDJ125, KDJ155 and GDJ185 are short body and take a different plate. The 4Runner N210 and N280 fit this plate without a body-length split.\u003c\/p\u003e\u003ch3\u003eDoes one plate really fit both Prados and 4Runners?\u003c\/h3\u003e\u003cp\u003eYes - these platforms share their underpinnings closely enough that Almont cuts one tank plate across the long-body Prados and both 4Runner generations.\u003c\/p\u003e\u003ch3\u003eCan I fit it with a tow bar in place?\u003c\/h3\u003e\u003cp\u003eThe plate mounts to the chassis points around the tank rather than the rear crossmember, but check your specific tow bar's fixing positions against the plate area before ordering.\u003c\/p\u003e","published_at":"2026-07-30T22:25:19+01:00","created_at":"2026-07-29T16:22:52+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-land-cruiser-prado","make:toyota","type:skid-plate"],"variants":[{"id":54838170354006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDT1215DL6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"485.10","grams":11500,"compare_at_price":null,"position":1,"product_id":11149771669846,"created_at":"2026-07-29T16:22:52+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83223336288598,"created_at":"2026-07-29T16:22:52+01:00","position":1,"updated_at":"2026-07-29T16:22:54+01:00","product_id":11149771669846,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDT1215DL6.webp?v=1785338574","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769277782,"title":"Almont Toyota FJ Cruiser and 4Runner N210\/N280 Gearbox and Transfer Skid Plate 8mm","handle":"almont-fj-cruiser-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n210-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n280-manual-automatic-gearbox-and-transfer","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThree Toyotas share this weak spot: on the FJ Cruiser and the 4Runner N210 and N280, the gearbox and transfer case hang at the lowest part of the mid-chassis, exactly where rock crests and deep ruts make contact. This Almont HeavyDuty plate spans that area in 8 mm of laser-cut EN AW-5083 H111 duralumin, 13 kg of sacrificial alloy that takes the scrape or the square-edged hit before the driveline does. One part number covers all three trucks, manual or automatic, bolting to the original chassis points with steel brackets supplied.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFJ Cruiser and 4Runner N210\/N280 owners running heavier loads or long overland routes\u003c\/li\u003e\n\u003cli\u003eTerrain with rock steps and crests, where Almont recommends 8 mm over 6 mm\u003c\/li\u003e\n\u003cli\u003eManual and automatic drivelines, covered by the same plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD\u003c\/li\u003e\n\u003cli\u003eProduct Type: gearbox and transfer case skid plate, HeavyDuty grade\u003c\/li\u003e\n\u003cli\u003eSKU: PDTFJB8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota FJ Cruiser, 4Runner N210, 4Runner N280\u003c\/li\u003e\n\u003cli\u003eMaterial: 8 mm EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eWeight: 13 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm your 4Runner generation before ordering: N210 and N280 are covered here, earlier trucks are not.\u003c\/li\u003e\n\u003cli\u003eAlmont plates fit the original chassis holes and threads; body lifts, diff-drop kits and modified transmission mounts rule them out.\u003c\/li\u003e\n\u003cli\u003eAdd the \u003ca href=\"\/products\/almont-kdj-120-fuel-tank-skid-plate-long-body-kdj-150-fuel-tank-skid-plate-long-body-gdj-180-fuel-tank-skid-plate-long-body-4runner-n210-fuel-tank-skid-plate-4runner-n280-fuel-tank\"\u003efuel tank plate for the N210\/N280\u003c\/a\u003e or the \u003ca href=\"\/products\/almont-fj-cruiser-front-skid-plate\"\u003eFJ Cruiser front plate\u003c\/a\u003e to extend the covered run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDTFJB8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota FJ Cruiser \/ 4Runner N210 \/ 4Runner N280, manual or automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this the same plate as the 6 mm FJ Cruiser version?\u003c\/h3\u003e\u003cp\u003eSame protected area, different grade. The \u003ca href=\"\/products\/almont-fj-cruiser-manual-automatic-gearbox-and-transfer-skid-plate\"\u003eSportDuty 6 mm plate\u003c\/a\u003e is FJ-only and a kilo lighter; this 8 mm HeavyDuty plate adds the 4Runner N210 and N280 fitments and more material for harder use.\u003c\/p\u003e\u003ch3\u003eWill it fit my 4Runner if the transmission mounts have been changed?\u003c\/h3\u003e\u003cp\u003eNo. Almont plates are not compatible with modified transmission or anti-roll-bar mounts, diff-drop kits or body lifts. Standard mounts with raised suspension are fine.\u003c\/p\u003e\u003ch3\u003eDoes automatic versus manual change the part?\u003c\/h3\u003e\u003cp\u003eIt does not. The plate covers both transmissions on all three vehicles, so the only check that matters is the model and generation.\u003c\/p\u003e","published_at":"2026-07-30T22:23:03+01:00","created_at":"2026-07-29T16:21:25+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-fj-cruiser","make:toyota","type:skid-plate"],"variants":[{"id":54838163571030,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDTFJB8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"519.12","grams":12500,"compare_at_price":null,"position":1,"product_id":11149769277782,"created_at":"2026-07-29T16:21:25+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83223323083094,"created_at":"2026-07-29T16:21:25+01:00","position":1,"updated_at":"2026-07-29T16:21:28+01:00","product_id":11149769277782,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDTFJB8_1f496e7f-df12-495e-8f82-2d399ac34d14.jpg?v=1785338488","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149766721878,"title":"Almont Toyota 4Runner KZ Diesel Front Skid Plate","handle":"almont-4runner-kz-front-diesel-engines-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eDrop a front wheel off a rock step and the nose of a 4Runner dips straight at whatever is underneath. This Almont front skid plate for the Toyota 4Runner KZ diesel puts 6 mm of EN AW-5083 H111 duralumin between that first impact and the front underside, so stones, ruts and scraped crests land on laser-cut alloy instead of the hardware behind the bumper. Versions are made for the original bumper and the ACAYX bumper, and the plate mounts to the chassis using the truck's existing fixing points.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKZ diesel 4Runners used on green lanes, gravel and rocky tracks\u003c\/li\u003e\n\u003cli\u003eOwners keeping an older diesel 4Runner in regular off-road use\u003c\/li\u003e\n\u003cli\u003eTrucks running either the original bumper or an ACAYX bumper\u003c\/li\u003e\n\u003cli\u003eDrivers who would rather scrape alloy than book underbody repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, made in Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota 4Runner with the KZ diesel engine\u003c\/li\u003e\n\u003cli\u003eMaterial: 6 mm EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eFitment type: bumper-matched, Original or ACAYX versions\u003c\/li\u003e\n\u003cli\u003eIncluded Items: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChoose the version that matches the bumper on your truck before ordering.\u003c\/li\u003e\n\u003cli\u003eRaised non-original suspension is fine; body-lift kits and modified chassis mounts are not compatible.\u003c\/li\u003e\n\u003cli\u003eRunning a later 4Runner? The \u003ca href=\"\/products\/almont-fj-cruiser-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n210-manual-automatic-gearbox-and-transfer-skid-plate-4runner-n280-manual-automatic-gearbox-and-transfer\"\u003egearbox and transfer plate for 4Runner N210\/N280\u003c\/a\u003e and the \u003ca href=\"\/products\/almont-kdj-120-fuel-tank-skid-plate-long-body-kdj-150-fuel-tank-skid-plate-long-body-gdj-180-fuel-tank-skid-plate-long-body-4runner-n210-fuel-tank-skid-plate-4runner-n280-fuel-tank\"\u003eN210\/N280 fuel tank plate\u003c\/a\u003e cover the newer generations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDT04A (Original) \/ PDT04A6AX (ACAYX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota 4Runner KZ diesel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo I need to drill or modify anything to fit it?\u003c\/h3\u003e\u003cp\u003eNo. The plate bolts to the original chassis holes and threads using the supplied steel brackets and pre-installed bolts, with everyday tools.\u003c\/p\u003e\u003ch3\u003eWill it work with a winch or lifted suspension?\u003c\/h3\u003e\u003cp\u003eYes on both counts. Almont confirms its plates can be fitted with a recovery winch in place, and raised non-original suspension is accepted; only body lifts and modified mounts rule the plate out.\u003c\/p\u003e","published_at":"2026-07-30T22:20:55+01:00","created_at":"2026-07-29T16:20:02+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","make:toyota","type:skid-plate"],"variants":[{"id":54838158229846,"title":"ACAYX","option1":"ACAYX","option2":null,"option3":null,"sku":"PDT04A6AX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"270.90","grams":6000,"compare_at_price":null,"position":1,"product_id":11149766721878,"created_at":"2026-07-29T16:20:02+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54838158262614,"title":"Original","option1":"Original","option2":null,"option3":null,"sku":"PDT04A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"270.90","grams":6000,"compare_at_price":null,"position":2,"product_id":11149766721878,"created_at":"2026-07-29T16:20:02+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83223310467414,"created_at":"2026-07-29T16:20:02+01:00","position":1,"updated_at":"2026-07-29T16:20:05+01:00","product_id":11149766721878,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDT04AB.jpg?v=1785338405","width":1080,"height":1080}],"options":[{"name":"Front Type","position":1,"values":["ACAYX","Original"]}]},{"id":11150400520534,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Tall - Right side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-tall-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Tall - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289.2PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289.2PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:28:50+01:00","created_at":"2026-07-30T11:44:36+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673908566,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289.2PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400520534,"created_at":"2026-07-30T11:44:36+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673941334,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289.2PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400520534,"created_at":"2026-07-30T11:44:36+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238351339862,"created_at":"2026-07-30T15:40:12+01:00","position":1,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400520534,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2PA-1_70bd2622-25c0-47fb-93ab-ae9200a88c33.jpg?v=1785422415","width":1800,"height":1200},{"id":83238351372630,"created_at":"2026-07-30T15:40:12+01:00","position":2,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400520534,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2PA-2.jpg?v=1785422415","width":1800,"height":1200},{"id":83238351405398,"created_at":"2026-07-30T15:40:12+01:00","position":3,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400520534,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2PA-3.jpg?v=1785422415","width":1800,"height":1200}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400291158,"title":"Planted Seat Bracket - Toyota 4Runner [2nd Generation, N120\/N130 Chassis] (1990-1995) - Right side","handle":"planted-seat-bracket-toyota-4runner-2nd-generation-n120-n130-chassis-1990-1995-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [2nd Generation \/ N120\/N130 Chassis] (1990-1995) - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB428PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB428PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cbr\u003e","published_at":"2026-07-31T09:29:06+01:00","created_at":"2026-07-30T11:44:28+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673482582,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB428PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400291158,"created_at":"2026-07-30T11:44:28+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673515350,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB428PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400291158,"created_at":"2026-07-30T11:44:28+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350586198,"created_at":"2026-07-30T15:40:07+01:00","position":1,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400291158,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/unnamed-1_5add3f73-deae-4130-bb94-6d8b334c6483.jpg?v=1785422411","width":3024,"height":4032},{"id":83238350618966,"created_at":"2026-07-30T15:40:07+01:00","position":2,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400291158,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/unnamed-2_ed824017-1044-4442-984d-c16f360f6129.jpg?v=1785422411","width":3024,"height":4032}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400487766,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Tall - Left side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-tall-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Tall - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289.2DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289.2DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:28:53+01:00","created_at":"2026-07-30T11:44:34+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673843030,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289.2DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400487766,"created_at":"2026-07-30T11:44:35+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673875798,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289.2DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400487766,"created_at":"2026-07-30T11:44:35+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238351143254,"created_at":"2026-07-30T15:40:12+01:00","position":1,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400487766,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2DR-1_93418580-0fea-4543-9add-f607e81589eb.jpg?v=1785422415","width":5000,"height":3333},{"id":83238351176022,"created_at":"2026-07-30T15:40:12+01:00","position":2,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400487766,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2DR-2.jpg?v=1785422415","width":5000,"height":3333},{"id":83238351208790,"created_at":"2026-07-30T15:40:12+01:00","position":3,"updated_at":"2026-07-30T15:40:15+01:00","product_id":11150400487766,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.2DR-3.jpg?v=1785422415","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400192854,"title":"Planted Seat Bracket - Toyota 4Runner (1995-2002) - Left side","handle":"planted-seat-bracket-toyota-4runner-1995-2002-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner (1995-2002) - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB226DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB226DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:29:13+01:00","created_at":"2026-07-30T11:44:24+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673285974,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB226DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400192854,"created_at":"2026-07-30T11:44:24+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673318742,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB226DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400192854,"created_at":"2026-07-30T11:44:24+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238349963606,"created_at":"2026-07-30T15:40:05+01:00","position":1,"updated_at":"2026-07-30T15:40:08+01:00","product_id":11150400192854,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226DR-2_162afd98-2f85-421b-9295-dd9b6cf5d506.jpg?v=1785422408","width":1024,"height":768},{"id":83238349996374,"created_at":"2026-07-30T15:40:05+01:00","position":2,"updated_at":"2026-07-30T15:40:08+01:00","product_id":11150400192854,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226DR-3.jpg?v=1785422408","width":1024,"height":768},{"id":83238350029142,"created_at":"2026-07-30T15:40:05+01:00","position":3,"updated_at":"2026-07-30T15:40:08+01:00","product_id":11150400192854,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226DR-1.jpg?v=1785422408","width":1024,"height":768}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400389462,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Medium - Left side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-medium-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Medium - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289.1DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289.1DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:28:58+01:00","created_at":"2026-07-30T11:44:32+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673679190,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289.1DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400389462,"created_at":"2026-07-30T11:44:32+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673711958,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289.1DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400389462,"created_at":"2026-07-30T11:44:32+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350946646,"created_at":"2026-07-30T15:40:10+01:00","position":1,"updated_at":"2026-07-30T15:40:14+01:00","product_id":11150400389462,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1DR-1_65c70ca5-1fa7-4f37-bfcd-9966a1edeebf.jpg?v=1785422414","width":5000,"height":3333},{"id":83238350979414,"created_at":"2026-07-30T15:40:10+01:00","position":2,"updated_at":"2026-07-30T15:40:14+01:00","product_id":11150400389462,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1DR-2.jpg?v=1785422414","width":5000,"height":3333},{"id":83238351012182,"created_at":"2026-07-30T15:40:10+01:00","position":3,"updated_at":"2026-07-30T15:40:14+01:00","product_id":11150400389462,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1DR-3.jpg?v=1785422414","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400454998,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Medium - Right side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-medium-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Medium - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289.1PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289.1PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:28:55+01:00","created_at":"2026-07-30T11:44:33+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673744726,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289.1PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400454998,"created_at":"2026-07-30T11:44:33+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673777494,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289.1PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400454998,"created_at":"2026-07-30T11:44:33+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238351044950,"created_at":"2026-07-30T15:40:11+01:00","position":1,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400454998,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1PA-1_442362a2-b0a7-4614-baef-3cb1aec58beb.jpg?v=1785422413","width":485,"height":485},{"id":83238351077718,"created_at":"2026-07-30T15:40:11+01:00","position":2,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400454998,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1PA-2.jpg?v=1785422413","width":485,"height":485},{"id":83238351110486,"created_at":"2026-07-30T15:40:11+01:00","position":3,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400454998,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289.1PA-3.jpg?v=1785422413","width":485,"height":485}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400356694,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Low - Right side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-low-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Low - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:29:00+01:00","created_at":"2026-07-30T11:44:31+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673613654,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400356694,"created_at":"2026-07-30T11:44:31+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673646422,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400356694,"created_at":"2026-07-30T11:44:31+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350815574,"created_at":"2026-07-30T15:40:09+01:00","position":1,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400356694,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289PA-1_b10249f6-47a7-4e7c-b620-96303be30102.jpg?v=1785422413","width":5000,"height":3333},{"id":83238350848342,"created_at":"2026-07-30T15:40:09+01:00","position":2,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400356694,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289PA-2.jpg?v=1785422413","width":5000,"height":3333},{"id":83238350881110,"created_at":"2026-07-30T15:40:09+01:00","position":3,"updated_at":"2026-07-30T15:40:13+01:00","product_id":11150400356694,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289PA-3.jpg?v=1785422413","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400258390,"title":"Planted Seat Bracket - Toyota 4Runner [2nd Generation, N120\/N130 Chassis] (1990-1995) - Left side","handle":"planted-seat-bracket-toyota-4runner-2nd-generation-n120-n130-chassis-1990-1995-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [2nd Generation \/ N120\/N130 Chassis] (1990-1995) - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB428DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB428DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cbr\u003e","published_at":"2026-07-31T09:29:08+01:00","created_at":"2026-07-30T11:44:27+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673417046,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB428DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400258390,"created_at":"2026-07-30T11:44:27+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673449814,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB428DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400258390,"created_at":"2026-07-30T11:44:27+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350520662,"created_at":"2026-07-30T15:40:07+01:00","position":1,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400258390,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/unnamed-1_39cdc09e-2813-4da9-81e8-f39bb7b5f9b2.jpg?v=1785422411","width":3024,"height":4032},{"id":83238350553430,"created_at":"2026-07-30T15:40:07+01:00","position":2,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400258390,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/unnamed-2_2556344d-f94b-43ba-af33-e6862040ed72.jpg?v=1785422411","width":3024,"height":4032}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400323926,"title":"Planted Seat Bracket - Toyota 4Runner [5th Generation] (2009+) Low - Left side","handle":"planted-seat-bracket-toyota-4runner-5th-generation-2009-low-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner [5th Generation] (2009+) Low - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB289DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB289DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:29:03+01:00","created_at":"2026-07-30T11:44:29+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673548118,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB289DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400323926,"created_at":"2026-07-30T11:44:29+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673580886,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB289DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400323926,"created_at":"2026-07-30T11:44:29+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350684502,"created_at":"2026-07-30T15:40:09+01:00","position":1,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400323926,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289DR-1_7dc17a31-53f7-4549-a985-58c124932d62.jpg?v=1785422411","width":1800,"height":1200},{"id":83238350717270,"created_at":"2026-07-30T15:40:09+01:00","position":2,"updated_at":"2026-07-30T15:40:12+01:00","product_id":11150400323926,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289DR-2.jpg?v=1785422412","width":5000,"height":3333},{"id":83238350750038,"created_at":"2026-07-30T15:40:09+01:00","position":3,"updated_at":"2026-07-30T15:40:11+01:00","product_id":11150400323926,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB289DR-3.jpg?v=1785422411","width":1800,"height":1200}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150400225622,"title":"Planted Seat Bracket - Toyota 4Runner (1995-2002) - Right side","handle":"planted-seat-bracket-toyota-4runner-1995-2002-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Toyota 4Runner (1995-2002) - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB226PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB226PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:29:11+01:00","created_at":"2026-07-30T11:44:25+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:toyota-4runner","make:toyota","planted","planted-seat-bracket","planted-technology","Toyota","type:seat-bracket"],"variants":[{"id":54841673351510,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB226PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150400225622,"created_at":"2026-07-30T11:44:25+01:00","updated_at":"2026-08-16T14:18:39+01:00"},{"id":54841673384278,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB226PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150400225622,"created_at":"2026-07-30T11:44:25+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83238350258518,"created_at":"2026-07-30T15:40:06+01:00","position":1,"updated_at":"2026-07-30T15:40:09+01:00","product_id":11150400225622,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226PA-2_70ed405a-3963-4f1a-83aa-e7210a9329a2.jpg?v=1785422409","width":1024,"height":768},{"id":83238350291286,"created_at":"2026-07-30T15:40:06+01:00","position":2,"updated_at":"2026-07-30T15:40:09+01:00","product_id":11150400225622,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226PA-3.jpg?v=1785422409","width":1024,"height":768},{"id":83238350324054,"created_at":"2026-07-30T15:40:06+01:00","position":3,"updated_at":"2026-07-30T15:40:08+01:00","product_id":11150400225622,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB226PA-1.jpg?v=1785422408","width":1024,"height":768}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11146185015638,"title":"ARB Toyota Hilux \/ 4Runner \/ Surf IFS 1989-1997 Deluxe Winch Bull Bar","handle":"arb-deluxe-winch-bull-bar-toyota-hilux-4runner-surf-ifs-1989-1997","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eARB Toyota Hilux \/ 4Runner \/ Surf IFS 1989-1997 Deluxe Winch Bull Bar adds the listed front protection and accessory-mounting structure for the specified vehicle application. A vehicle-specific bar is engineered around chassis mounts and body shape rather than adapted from a generic bumper. Designed for Toyota Hilux, 4Runner and Surf models with independent front suspension, its durable steel construction and black powder-coated finish are built to withstand demanding off-road and overland use. The bumper-replacement design incorporates upswept wings to help preserve the vehicle's approach angle while protecting vulnerable components such as the radiator and headlights. Fitment: This is a vehicle-specific part. Before ordering, confirm the exact vehicle, year, body style and cab shown in the title. If your vehicle is modified or already fitted with aftermarket parts, send us the details first.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific front protection builds.\u003c\/li\u003e\n\u003cli\u003eWinch installations using a compatible bumper or bar.\u003c\/li\u003e\n\u003cli\u003eTouring vehicles planning lights and recovery access at the front.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFront-End Equipment And Sensor Planning\u003c\/h2\u003e\u003cp\u003eFront bars affect more than appearance. Plan the winch, lights, number plate, recovery access and airflow together, and account for sensors, cameras and driver-assistance equipment on the vehicle. The exact bar variant and trim application must match before fitting.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: ARB\u003c\/li\u003e\n\u003cli\u003eProduct type: front protection bar or bumper\u003c\/li\u003e\n\u003cli\u003eSKU: XVFBF3414070\u003c\/li\u003e\n\u003cli\u003eVehicle application: Toyota Hilux \/ 4Runner \/ Surf IFS 1989-1997\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm vehicle, year, trim, engine and sensor or camera configuration. Check whether the winch cradle, fog lights, parking-sensor parts and recovery points are included or separate. Professional fitting is appropriate where safety systems and body alignment are involved.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eARB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003efront protection bar or bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eXVFBF3414070\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Application\u003c\/th\u003e\n\u003ctd\u003eToyota Hilux \/ 4Runner \/ Surf IFS 1989-1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill the bar retain parking sensors and cameras?\u003c\/h3\u003e\u003cp\u003eCompatibility depends on the exact bar variant and vehicle equipment. Match the sensor and camera configuration before ordering.\u003c\/p\u003e\u003ch3\u003eIs a winch included?\u003c\/h3\u003e\u003cp\u003eTreat the winch as separate unless the package details name it.\u003c\/p\u003e\u003ch3\u003eWill suspension setup need review?\u003c\/h3\u003e\u003cp\u003eFront accessory weight can affect ride height and spring selection, so assess the completed vehicle load.\u003c\/p\u003e","published_at":"2026-07-31T00:31:54+01:00","created_at":"2026-07-26T22:20:29+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"ARB","product_type":"Bull Bar","tags":["ARB","brand:arb","Bull Bar","cat:protection","dept:vehicle-accessories","fits:toyota-4runner","fits:toyota-hilux","make:toyota","Toyota","Toyota 4Runner","Toyota Hilux","type:bull-bar"],"variants":[{"id":54818884223318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XVFBF3414070","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1292.40","grams":0,"compare_at_price":null,"position":1,"product_id":11146185015638,"created_at":"2026-07-26T22:20:29+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":83163124269398,"created_at":"2026-07-26T22:20:29+01:00","position":1,"updated_at":"2026-07-26T22:20:32+01:00","product_id":11146185015638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/contents_10.jpg?v=1785100832","width":1600,"height":1062},{"id":83163124302166,"created_at":"2026-07-26T22:20:29+01:00","position":2,"updated_at":"2026-07-26T22:20:31+01:00","product_id":11146185015638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/contents_6.jpg?v=1785100831","width":1000,"height":1000},{"id":83163124334934,"created_at":"2026-07-26T22:20:29+01:00","position":3,"updated_at":"2026-07-26T22:20:32+01:00","product_id":11146185015638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/contents_7.jpg?v=1785100832","width":1000,"height":1000},{"id":83163124367702,"created_at":"2026-07-26T22:20:29+01:00","position":4,"updated_at":"2026-07-26T22:20:31+01:00","product_id":11146185015638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/contents_8.jpg?v=1785100831","width":1000,"height":1000},{"id":83163124400470,"created_at":"2026-07-26T22:20:29+01:00","position":5,"updated_at":"2026-07-26T22:20:31+01:00","product_id":11146185015638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/contents_9.jpg?v=1785100831","width":1000,"height":1000}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953192079702,"title":"Apex Chassis KIT410 Heavy Duty Tie Rod Kit – Toyota 4Runner (2010–2024) \u0026 FJ Cruiser","handle":"apex-chassis-kit410-heavy-duty-tie-rod-kit-toyota-4runner-2010-2024-fj-cruiser","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis Heavy Duty Tie Rod Kit for the 4Runner and FJ Cruiser brings the same steering reinforcement trusted on hard-used Tacomas to the 4Runner and FJ Cruiser. A touring-built 4Runner (2010-2024) or FJ Cruiser (2010-2014) carries drawers, water, recovery kit and roof weight everywhere it goes, and the factory tie rods feel it first - especially with a lift and larger tyres. This kit replaces them with oversized, pre-assembled inner and outer assemblies for both sides, suitable up to a 3 inch lift. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4Runner overland and touring builds carrying sustained load on lifted suspension\u003c\/li\u003e\n\u003cli\u003eFJ Cruiser owners reinforcing steering before remote trips\u003c\/li\u003e\n\u003cli\u003eTrucks on larger tyres where the factory linkage has gone vague or bent before\u003c\/li\u003e\n\u003cli\u003eBuilds up to a 3 inch lift wanting a bolt-in, pre-assembled upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Heavy-duty tie rod kit (inner and outer, both sides)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT410\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Pre-assembled inner and outer tie rod assemblies, driver and passenger side\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Toyota 4Runner (2010-2024) 2WD\/4WD; Toyota FJ Cruiser (2010-2014) 2WD\/4WD\u003c\/li\u003e\n\u003cli\u003eLift Compatibility: Up to 3 inch lift\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your 4Runner or FJ Cruiser year before ordering - fitment shown is manufacturer reference. The kit suits lifts up to 3 inches; beyond that, keep the steering within its working range with limit straps. Plan an alignment after installation, and inspect ball joints, rack boots and bushes while the linkage is off so the whole front end comes back tight together.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty tie rod kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Items\u003c\/td\u003e\n\u003ctd\u003ePre-assembled inner and outer assemblies, both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eToyota 4Runner 2010-2024 2WD\/4WD; FJ Cruiser 2010-2014 2WD\/4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Compatibility\u003c\/td\u003e\n\u003ctd\u003eUp to 3 inch lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy upgrade the tie rods on a touring 4Runner?\u003c\/h3\u003e\u003cp\u003eConstant load plus corrugations is exactly the duty that wears and bends factory rods. Oversized forged assemblies keep steering precise when the truck is a long way from a workshop.\u003c\/p\u003e\u003ch3\u003eDoes it fit lifted vehicles?\u003c\/h3\u003e\u003cp\u003eYes, up to a 3 inch lift. Taller setups need limit straps to protect the steering geometry.\u003c\/p\u003e\u003ch3\u003eIs it a pair or one side?\u003c\/h3\u003e\u003cp\u003eThe kit covers both sides - pre-assembled inner and outer assemblies for driver and passenger side.\u003c\/p\u003e\u003cp\u003eCompare the rest of our \u003ca href=\"\/collections\/tie-rods\"\u003eheavy-duty tie rod kits\u003c\/a\u003e if you run more than one Toyota in the fleet.\u003c\/p\u003e","published_at":"2026-07-09T09:26:55+01:00","created_at":"2026-07-08T15:00:38+01:00","updated_at":"2026-08-16T14:18:39+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:toyota-4runner","fits:toyota-fj-cruiser","make:toyota","Tie Rod","Toyota 4Runner","type:tie-rods"],"variants":[{"id":54474192683350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT410","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"730.00","grams":5000,"compare_at_price":null,"position":1,"product_id":10953192079702,"created_at":"2026-07-08T15:00:38+01:00","updated_at":"2026-08-16T14:18:39+01:00"}],"images":[{"id":82239105859926,"created_at":"2026-07-08T15:00:38+01:00","position":1,"updated_at":"2026-07-08T15:00:41+01:00","product_id":10953192079702,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT400-1.jpg?v=1783519241","width":512,"height":512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]}]}