{"products":[{"id":10982581895510,"title":"APEX Design USA TSR Hose Fitting (Steering Box Side) - JIC 37, -4 Female Swivel to 1\/4 in Hose Crimp","handle":"apex-design-usa-tsr-hose-fitting-steering-box-side-jic-37-degree-4-female-swivel-to-1-4-id-hose-crimp","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA hose fitting is the steering box side connection for Through Shaft Ram hydraulic hoses: a JIC 37 degree, -4 female swivel to 1\/4 inch ID hose crimp. Keep one as a spare, replace a damaged fitting, or use it to shorten the hoses to suit your routing - a custom-length hose run with factory-style ends is what separates a tidy assist install from a coiled-up compromise.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR owners keeping a spare steering box side fitting on hand\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged or worn hose end without buying a full hose kit\u003c\/li\u003e\n\u003cli\u003eShortening TSR hoses to fit a specific chassis routing cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose fitting (steering box side)\u003c\/li\u003e\n\u003cli\u003eSKU: U01-08-001-1\u003c\/li\u003e\n\u003cli\u003eSpecification: JIC 37 degree, -4 female swivel to 1\/4 inch ID hose crimp\u003c\/li\u003e\n\u003cli\u003eUse: Replacement, spare, or hose shortening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm the thread and hose specification against your TSR hoses before ordering - this is the steering box side fitting in JIC 37 degree, -4 female swivel form for 1\/4 inch ID hose. Crimping needs the right tooling: if you are shortening hoses, have the crimp done by someone equipped for hydraulic hose work, then pressure-check before driving.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eU01-08-001-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eJIC 37 deg, -4 female swivel to 1\/4 in ID hose crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eSteering box side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eCan I use this to shorten my TSR hoses?\u003c\/h3\u003e\u003cp\u003eYes - that is one of its intended uses. Cut the hose to length and have the fitting crimped with proper hydraulic tooling, then pressure-test the joint before the system goes back into service.\u003c\/p\u003e\u003cp\u003eNeed the rest of the routing hardware? The hose mounts in the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e finish the run.\u003c\/p\u003e","published_at":"2026-07-18T13:56:22+01:00","created_at":"2026-07-17T11:14:32+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296983382,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"U01-08-001-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"20.00","grams":51,"compare_at_price":null,"position":1,"product_id":10982581895510,"created_at":"2026-07-17T11:14:32+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649810895190,"created_at":"2026-07-17T11:41:47+01:00","position":1,"updated_at":"2026-07-17T11:41:50+01:00","product_id":10982581895510,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250819_140841_1790f89c-c267-42b5-bc97-3f4991cd26af.png?v=1784284910","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581829974,"title":"APEX Design USA TSR Through Shaft Ram Skid Plate","handle":"apex-design-usa-tsr-through-shaft-ram-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe APEX Design USA TSR Skid Plate protects the Through Shaft Ram steering ram when the terrain starts hitting back. The TSR is APEX's hydraulic assist steering system for the Jeep JL and JT, and its ram sits low in the steering path - exactly where rocks, ruts and trail debris find low-hanging hardware first. This plate shields the ram so scrapes and strikes land on the plate first, not on the component your steering depends on. It is compatible with both current Through Shaft Ram kits and is the natural way to finish a TSR install before hard off-road use.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR-equipped Jeep JL and JT builds heading into rocky, rutted terrain where the ram runs exposed\u003c\/li\u003e\n\u003cli\u003eDrivers finishing a Through Shaft Ram install with protection still to sort before the first hard trip\u003c\/li\u003e\n\u003cli\u003eTrail and competition builds that slide over obstacles rather than always clearing them\u003c\/li\u003e\n\u003cli\u003eOwners covering a high-value hydraulic steering setup ahead of remote touring or event weekends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Shield The Ram\u003c\/h2\u003e\u003cp\u003eA hydraulic assist ram is one of the most consequential parts on the front of the vehicle: if it takes a hard hit mid-trail, steering control is what suffers, and the trip usually ends early. Compared with running the ram unguarded, a dedicated plate means ground contact costs you plate scars rather than damaged steering hardware. It is the same logic as any underbody protection - let the plate take the abuse before the expensive part does - applied to the exact component the TSR system adds.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Steering ram skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: X02-10-011\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep JL and JT (via the APEX TSR system)\u003c\/li\u003e\n\u003cli\u003eVariant Fitment: Compatible with TSR kits X02-10-001 and X02-10-003\u003c\/li\u003e\n\u003cli\u003eBuyer Checks: Confirm which TSR kit is fitted to your vehicle before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eThis plate is made for the APEX Through Shaft Ram and fits both current kits. Before ordering, confirm which kit is on your vehicle, and check your steering layout and clearances so the plate can sit where it should. If you are pairing the TSR with a Steer Smarts Yeti XD tie rod, the \u003ca href=\"\/products\/apex-design-usa-steer-smarts-mounting-bracket-for-apex-tsr\"\u003everified Yeti XD mounting bracket kit\u003c\/a\u003e completes the same install.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSteering ram skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX02-10-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep JL and JT (with APEX TSR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant Fitment\u003c\/td\u003e\n\u003ctd\u003eTSR kits X02-10-001 and X02-10-003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich TSR kits does this plate fit?\u003c\/h3\u003e\u003cp\u003eIt is compatible with both Through Shaft Ram kits. Check the kit part number from your original order if you are not sure which version your Jeep runs.\u003c\/p\u003e\u003ch3\u003eDo I need it for occasional off-road use?\u003c\/h3\u003e\u003cp\u003eThe plate earns its keep wherever the ram can contact rock, ruts or debris. If your driving includes green lanes, trails or sites with real ground-contact risk, fitting protection before the first strike is far cheaper than repairing steering hardware after it.\u003c\/p\u003e\u003cp\u003eConfirm which TSR kit your Jeep runs, then add the plate - and browse the rest of the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e to finish the setup in one order.\u003c\/p\u003e","published_at":"2026-07-18T13:56:22+01:00","created_at":"2026-07-17T11:14:30+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296917846,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X02-10-011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"195.00","grams":6350,"compare_at_price":null,"position":1,"product_id":10982581829974,"created_at":"2026-07-17T11:14:31+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649806995798,"created_at":"2026-07-17T11:41:46+01:00","position":1,"updated_at":"2026-07-17T11:41:49+01:00","product_id":10982581829974,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SkidPlatebottomview_57e437c6-173f-409a-a091-c5b80fafcd03.png?v=1784284909","width":1080,"height":1080},{"id":82649807028566,"created_at":"2026-07-17T11:41:46+01:00","position":2,"updated_at":"2026-07-17T11:41:49+01:00","product_id":10982581829974,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/skidplatebodyview_e1df9a24-91ec-45a3-90dd-0db268948ed9.png?v=1784284909","width":1080,"height":1080},{"id":82649807061334,"created_at":"2026-07-17T11:41:46+01:00","position":3,"updated_at":"2026-07-17T11:41:50+01:00","product_id":10982581829974,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Skidplateeyeletview_2ac3cc42-4eab-439a-8294-6a489f6f7795.png?v=1784284910","width":1080,"height":1080},{"id":82649807094102,"created_at":"2026-07-17T11:41:46+01:00","position":4,"updated_at":"2026-07-17T11:41:49+01:00","product_id":10982581829974,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Skidplatetopview_0596859f-e855-4505-96df-f1a42ef05fc7.png?v=1784284909","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581698902,"title":"APEX Design USA TSR Hydraulic Hose Mount to LCA Bracket","handle":"apex-design-usa-tsr-hydraulic-hose-mount-to-oe-brake-lines","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA bracket secures Through Shaft Ram hydraulic hoses to the top of the driver-side lower control arm bracket. Hoses crossing between chassis and axle have to survive suspension movement, and anchoring them at the LCA bracket keeps the flex controlled - the hose moves where it was designed to move, instead of chafing wherever it lands.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR installs managing the chassis-to-axle hose transition\u003c\/li\u003e\n\u003cli\u003eBuilds where hoses currently flex unsupported near the control arms\u003c\/li\u003e\n\u003cli\u003eFinishing a hydraulic assist install to a trail-proof standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose mount bracket\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-022\u003c\/li\u003e\n\u003cli\u003eMounting Position: Top of driver-side lower control arm bracket\u003c\/li\u003e\n\u003cli\u003eCompatibility: APEX TSR hydraulic hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your hose route passes the driver-side LCA before ordering, and check hose length through full suspension travel once mounted - the line should flex freely at ride height, full droop and full compression without pulling tight or rubbing.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose mount bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eDriver-side LCA bracket, top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy anchor hoses at the control arm?\u003c\/h3\u003e\u003cp\u003eIt fixes the point where the hose transitions from chassis to moving axle, so the flex happens in a controlled loop rather than wherever the hose falls. That is what stops long-term chafe.\u003c\/p\u003e\u003cp\u003eCombine it with the frame and differential mounts from the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e for a fully secured run.\u003c\/p\u003e","published_at":"2026-07-18T13:56:21+01:00","created_at":"2026-07-17T11:14:29+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296786774,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-022","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"36.00","grams":164,"compare_at_price":null,"position":1,"product_id":10982581698902,"created_at":"2026-07-17T11:14:29+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649804276054,"created_at":"2026-07-17T11:41:44+01:00","position":1,"updated_at":"2026-07-17T11:41:48+01:00","product_id":10982581698902,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112539_e268f9ac-4a84-47b4-b262-e329c9bd40ef.png?v=1784284908","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581502294,"title":"APEX Design USA TSR Hydraulic Hose Mount - Differential","handle":"apex-design-usa-tsr-hydraulic-hose-mount-differential","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA hose mount kit routes Through Shaft Ram hydraulic hoses across the top of the differential cover - three brackets that turn the messiest part of a hydraulic assist install into a clean, secured run. Hydraulic hoses that drape loose under a 4x4 snag on rocks and rub through on corrugations; fixed mounting is what keeps an assist system reliable once the trails get rough.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR installs routing hydraulic hoses across the axle to the ram\u003c\/li\u003e\n\u003cli\u003eBuilds tidying an existing assist install where hoses run unsecured\u003c\/li\u003e\n\u003cli\u003eOwners planning hose protection before remote off-road trips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose mount kit (3 brackets)\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-021\u003c\/li\u003e\n\u003cli\u003eMounting Position: Top of the differential cover\u003c\/li\u003e\n\u003cli\u003eCompatibility: APEX TSR hydraulic hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your TSR hose routing passes over the diff cover before ordering, and plan the three bracket positions so the hoses sit clear of moving suspension parts through full travel. Check the run again after the first hard drive - a hose route is only finished when nothing rubs.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose mount kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e3 brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eTop of differential cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo I need this with a TSR kit?\u003c\/h3\u003e\u003cp\u003eIf your hose route crosses the axle, yes - it is the clean way to fix the lines to the diff cover instead of leaving them loose where terrain can reach them.\u003c\/p\u003e\u003cp\u003eMatch it with the rest of the APEX hose mounts to secure the full run from steering box to ram - see the \u003ca href=\"\/collections\/steering-kits\"\u003esteering range\u003c\/a\u003e for the set.\u003c\/p\u003e","published_at":"2026-07-18T13:56:20+01:00","created_at":"2026-07-17T11:14:25+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296590166,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-021","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"38.00","grams":111,"compare_at_price":null,"position":1,"product_id":10982581502294,"created_at":"2026-07-17T11:14:25+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649802178902,"created_at":"2026-07-17T11:41:43+01:00","position":1,"updated_at":"2026-07-17T11:41:46+01:00","product_id":10982581502294,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112344_c9d4b5e4-682c-45f5-bddb-2e54d5c3f1a6.png?v=1784284906","width":1512,"height":1512},{"id":82649802211670,"created_at":"2026-07-17T11:41:43+01:00","position":2,"updated_at":"2026-07-17T11:41:47+01:00","product_id":10982581502294,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/IMG_6905_bc3d4e45-188c-4f63-8b4a-15e32e5e3a5b.jpg?v=1784284907","width":4284,"height":4284}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581600598,"title":"APEX Design USA TSR Hydraulic Hose Mount - Inside Frame","handle":"apex-design-usa-tsr-hydraulic-hose-mount-inside-frame","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA bracket fastens Through Shaft Ram hydraulic hoses to the inside of the chassis frame - or any flat surface along the run. Frame-side routing keeps assist lines up out of the strike zone, and a dedicated bracket holds them there permanently instead of relying on cable ties around whatever is nearby.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR installs routing hydraulic hoses along the chassis rail\u003c\/li\u003e\n\u003cli\u003eBuilds with a flat panel or frame face where lines need fixing\u003c\/li\u003e\n\u003cli\u003eTidying an assist install so every hose has a mounted home\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose mount bracket\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-024\u003c\/li\u003e\n\u003cli\u003eMounting Position: Inside of frame or any flat surface\u003c\/li\u003e\n\u003cli\u003eCompatibility: APEX TSR hydraulic hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eWalk your hose route before ordering and count the fixing points you need - most installs use several mounts between the steering box and the ram. Position the bracket where the hoses run straight and clear of suspension movement, heat and edges.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose mount bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eInside frame \/ flat surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many do I need?\u003c\/h3\u003e\u003cp\u003eDepends on your route - plan the run from steering box to ram and place a mount wherever the hoses need holding straight or lifting clear. Order the number of fixing points your chassis needs.\u003c\/p\u003e\u003cp\u003eSee the rest of the APEX hose mounts in the \u003ca href=\"\/collections\/steering-kits\"\u003esteering range\u003c\/a\u003e to cover the whole run.\u003c\/p\u003e","published_at":"2026-07-18T13:56:20+01:00","created_at":"2026-07-17T11:14:26+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296688470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-024","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"15.00","grams":142,"compare_at_price":null,"position":1,"product_id":10982581600598,"created_at":"2026-07-17T11:14:26+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649803227478,"created_at":"2026-07-17T11:41:44+01:00","position":1,"updated_at":"2026-07-17T11:41:47+01:00","product_id":10982581600598,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112210_1c7f8636-7931-4c2f-856a-20e273827551.png?v=1784284907","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581371222,"title":"APEX Design USA TSR Axle Side Rod End Bolt","handle":"apex-design-usa-tsr-eylet-hardwar-axle-side","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe APEX Design USA TSR Axle Side Rod End Bolt is the axle-side fastener required when you run the Through Shaft Ram High Mount version. It is a small line on the order, but it is the part that completes the high mount installation - order it with the kit and the build goes together first time instead of stalling at the axle end.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBuyers ordering the TSR High Mount version - this bolt is required for it\u003c\/li\u003e\n\u003cli\u003eWorkshops staging a complete high mount install in one parts order\u003c\/li\u003e\n\u003cli\u003eReplacing axle-side hardware during a TSR refit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Rod end bolt (axle side)\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-019\u003c\/li\u003e\n\u003cli\u003eRequired For: TSR High Mount version\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm which TSR version you are running before ordering: the high mount setup needs this bolt, the standard mount does not. If you are ordering the high mount kit now, add this to the same order and torque all steering fasteners to spec during installation.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAxle side rod end bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired For\u003c\/td\u003e\n\u003ctd\u003eTSR High Mount version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo I need this bolt with a standard TSR kit?\u003c\/h3\u003e\u003cp\u003eNo - it is required for the High Mount version. Check which mount style your kit uses before ordering.\u003c\/p\u003e\u003cp\u003eOrdering the high mount setup? Add this bolt now and browse the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e for the brackets that finish the install.\u003c\/p\u003e","published_at":"2026-07-18T13:56:19+01:00","created_at":"2026-07-17T11:14:23+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296459094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-019","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"11.00","grams":159,"compare_at_price":null,"position":1,"product_id":10982581371222,"created_at":"2026-07-17T11:14:23+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649800343894,"created_at":"2026-07-17T11:41:41+01:00","position":1,"updated_at":"2026-07-17T11:41:44+01:00","product_id":10982581371222,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112255_4ace8c71-da47-4a0d-bc28-3cf8b4f18114.png?v=1784284904","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581797206,"title":"APEX Design USA TSR Hydraulic Hose Mount to OE Brake Line Bracket","handle":"apex-design-usa-tsr-hydraulic-hose-mount-to-oe-brake-line-bracket","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA bracket fastens Through Shaft Ram hydraulic hoses to the factory brake line and its bracket - using a mounting point the vehicle already has instead of drilling new ones. The factory brake line route survived the manufacturer's own durability testing, which makes it a smart path to borrow for hydraulic assist lines heading the same way.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR installs routing hoses alongside the factory brake lines\u003c\/li\u003e\n\u003cli\u003eBuilds that prefer OE mounting points over new holes in the chassis\u003c\/li\u003e\n\u003cli\u003eCompleting a hose run with every section fixed and rub-free\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose mount bracket\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-023\u003c\/li\u003e\n\u003cli\u003eMounting Position: Factory brake line and brake line bracket\u003c\/li\u003e\n\u003cli\u003eCompatibility: APEX TSR hydraulic hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eCheck your factory brake line routing matches your planned hose path before ordering, and make sure the mounted assist hoses cannot load or chafe the brake line itself - the brake system always keeps priority. Verify clearance through suspension movement after fitting.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose mount bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eOE brake line and bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill it interfere with my brake lines?\u003c\/h3\u003e\u003cp\u003eIt is designed to fix the assist hoses to the factory brake line bracket cleanly. Fit it so the hydraulic lines sit secure without pressing on the brake line, and check the run after installation.\u003c\/p\u003e\u003cp\u003eComplete the route with the inside-frame and LCA mounts from the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e.\u003c\/p\u003e","published_at":"2026-07-18T13:56:21+01:00","created_at":"2026-07-17T11:14:30+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296885078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-023","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"45.00","grams":77,"compare_at_price":null,"position":1,"product_id":10982581797206,"created_at":"2026-07-17T11:14:30+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649804833110,"created_at":"2026-07-17T11:41:45+01:00","position":1,"updated_at":"2026-07-17T11:41:48+01:00","product_id":10982581797206,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112125_34683e2c-0f6f-4239-8003-7c42deab5847.png?v=1784284908","width":1512,"height":1512},{"id":82649804865878,"created_at":"2026-07-17T11:41:45+01:00","position":2,"updated_at":"2026-07-17T11:41:49+01:00","product_id":10982581797206,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Screenshot2025-08-12at4.39.15PM_194cec3e-f98e-4981-bcaa-e64ccd27f2c0.png?v=1784284909","width":1622,"height":1522}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581436758,"title":"APEX Design USA TSR High Mount Double Shear Tie Rod Bracket","handle":"apex-design-usa-tsr-high-mount-double-sheer-tie-rod-bracket","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe APEX Design USA TSR High Mount Double Shear Tie Rod Bracket turns a single shear tie rod mount into a double shear one for high mount Through Shaft Ram setups. Double shear is the stronger way to load a joint - the fastener is supported on both sides instead of hanging off one - and on a high mount steering ram working hard off-road, that extra support is exactly where you want it. The bracket welds onto most single shear tie rod clamps, including Apex Chassis and similar designs.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh mount TSR builds converting the tie rod connection to double shear\u003c\/li\u003e\n\u003cli\u003eFabricators and workshops finishing a hydraulic assist install to a hard-use standard\u003c\/li\u003e\n\u003cli\u003eBuilds running Apex Chassis or similar single shear tie rod clamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Weld-on double shear tie rod bracket\u003c\/li\u003e\n\u003cli\u003eSKU: X02-10-008\u003c\/li\u003e\n\u003cli\u003eCompatibility: Welds to most single shear tie rod clamps, including Apex Chassis and similar\u003c\/li\u003e\n\u003cli\u003eInstallation: Welding required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eThis is a weld-on part, so plan the work with someone competent to weld steering components. Confirm your tie rod clamp is a single shear design the bracket can be welded to, and check the geometry against your high mount ram position before committing to the weld. If you are unsure whether your clamp suits it, check the details before ordering.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDouble shear tie rod bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX02-10-008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eMost single shear tie rod clamps, incl. Apex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy convert to double shear?\u003c\/h3\u003e\u003cp\u003eA double shear joint supports the bolt on both sides, spreading load that a single shear mount carries on one face. For a high mount ram that works the tie rod hard, it is the stronger arrangement.\u003c\/p\u003e\u003ch3\u003eCan I bolt it on instead of welding?\u003c\/h3\u003e\u003cp\u003eNo - the bracket is designed to be welded to the tie rod clamp. Treat it as a fabrication job on a steering component and have it done properly.\u003c\/p\u003e\u003cp\u003ePlanning the rest of the install? Browse the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e for the mounts and hardware that finish a TSR build.\u003c\/p\u003e","published_at":"2026-07-18T13:56:19+01:00","created_at":"2026-07-17T11:14:24+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296524630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X02-10-008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"41.00","grams":499,"compare_at_price":null,"position":1,"product_id":10982581436758,"created_at":"2026-07-17T11:14:24+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649801228630,"created_at":"2026-07-17T11:41:42+01:00","position":1,"updated_at":"2026-07-17T11:41:45+01:00","product_id":10982581436758,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250818_173359_70716d14-fa24-44d7-b24a-298ae4c449e7.png?v=1784284905","width":1512,"height":1512},{"id":82649801261398,"created_at":"2026-07-17T11:41:42+01:00","position":2,"updated_at":"2026-07-17T11:41:46+01:00","product_id":10982581436758,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/0D09BE4E-CF0A-4EA8-A863-D897FD53B0D2_0285c2b1-2fe0-4f8d-ba9d-b6f4d764c907.jpg?v=1784284906","width":4160,"height":4160},{"id":82649801294166,"created_at":"2026-07-17T11:41:42+01:00","position":3,"updated_at":"2026-07-17T11:41:46+01:00","product_id":10982581436758,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_111556_dfa89c9a-fe23-4ba4-a387-7353a7d415fc.png?v=1784284906","width":1512,"height":1512},{"id":82649801326934,"created_at":"2026-07-17T11:41:42+01:00","position":4,"updated_at":"2026-07-17T11:41:45+01:00","product_id":10982581436758,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250818_173258_29086155-b570-42fe-9ab8-865806c0ec3c.png?v=1784284905","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982581174614,"title":"APEX Design USA Steer Smarts Yeti XD Mounting Bracket for APEX TSR","handle":"apex-design-usa-steer-smarts-mounting-bracket-for-apex-tsr","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA mounting bracket kit is the verified way to run a Steer Smarts Yeti XD tie rod with the APEX Through Shaft Ram. Combining premium steering brands is normal on a serious Jeep build, but steering is the wrong place for guesswork: the kit was verified against the specific Steer Smarts tie rod and drag link part numbers, pairing them cleanly with either TSR kit. If you have invested in Yeti XD steering and want APEX hydraulic assist on the same axle, this bracket is the tested route between the two.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJeep builds already running Steer Smarts Yeti XD steering and adding the Through Shaft Ram\u003c\/li\u003e\n\u003cli\u003eOwners planning a combined premium steering and hydraulic assist upgrade in one stage\u003c\/li\u003e\n\u003cli\u003eDrivers choosing a verified parts pairing over fabricating custom mounts\u003c\/li\u003e\n\u003cli\u003eWorkshops fitting TSR systems to Yeti XD-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Tie rod mounting bracket kit\u003c\/li\u003e\n\u003cli\u003eSKU: X02-10-013\u003c\/li\u003e\n\u003cli\u003eVerified Fit: Steer Smarts tie rod 78088001 and drag link 78075001\u003c\/li\u003e\n\u003cli\u003eVariant Fitment: For TSR kits X02-10-001 and X02-10-003\u003c\/li\u003e\n\u003cli\u003eBuyer Checks: Confirm your exact tie rod and drag link part numbers before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eThe verified combination is specific: Steer Smarts tie rod 78088001 with drag link 78075001, paired with either Through Shaft Ram kit. Other tie rods or drag links may bring critical steering components into contact with each other, so if your part numbers differ, confirm your setup before ordering rather than adapting the kit. A dedicated install guide is available for this bracket - follow it and check clearances around the ram and steering linkage during installation.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eTie rod mounting bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX02-10-013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVerified Fit\u003c\/td\u003e\n\u003ctd\u003eSteer Smarts tie rod 78088001; drag link 78075001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant Fitment\u003c\/td\u003e\n\u003ctd\u003eTSR kits X02-10-001 and X02-10-003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this work with other tie rods or drag links?\u003c\/h3\u003e\u003cp\u003eThe kit was verified with the Steer Smarts part numbers shown in the specifications. Other combinations may cause contact between steering components, so confirm your exact parts before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need a TSR kit already?\u003c\/h3\u003e\u003cp\u003eYes - the bracket exists to pair the Yeti XD tie rod with the Through Shaft Ram, so it belongs on builds running either TSR kit.\u003c\/p\u003e\u003cp\u003eConfirm your tie rod and drag link part numbers, then pair two premium steering systems the verified way - and while the steering is apart, the \u003ca href=\"\/products\/apex-design-usa-tsr-through-shaft-ram-skid-plate\"\u003eTSR skid plate\u003c\/a\u003e protects the ram itself.\u003c\/p\u003e","published_at":"2026-07-18T13:56:17+01:00","created_at":"2026-07-17T11:14:20+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583296262486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X02-10-013","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"60.00","grams":907,"compare_at_price":null,"position":1,"product_id":10982581174614,"created_at":"2026-07-17T11:14:20+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649797558614,"created_at":"2026-07-17T11:41:39+01:00","position":1,"updated_at":"2026-07-17T11:41:43+01:00","product_id":10982581174614,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Steer_Smarts_Yeti_XD_cbde428f-0b50-4e69-9b12-bcb3e4971afe.png?v=1784284903","width":2000,"height":2000},{"id":82649797591382,"created_at":"2026-07-17T11:41:39+01:00","position":2,"updated_at":"2026-07-17T11:41:43+01:00","product_id":10982581174614,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Steer_Smarts_Tie_Rod_Yeti_Xd_with_the_apex_through_shaft_ram_9115e3cd-d1b4-4a5c-9475-e4fa534b928d.jpg?v=1784284903","width":3072,"height":3072},{"id":82649797624150,"created_at":"2026-07-17T11:41:39+01:00","position":3,"updated_at":"2026-07-17T11:41:42+01:00","product_id":10982581174614,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Steer_Smarts_Tie_Rod_Yeti_Xd_f9ab5f08-dddc-4a5d-a192-0d05903b7e30.jpg?v=1784284902","width":2461,"height":2461}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982580617558,"title":"APEX Design USA Rock Jock Currectlync Mounting Bracket for APEX TSR","handle":"apex-design-usa-rock-jock-tie-rod-bracket-for-apex-tsr","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA mounting bracket kit is the verified route to running a Rock Jock Currectlync tie rod with the APEX Through Shaft Ram. Plenty of serious Jeep builds carry Currectlync steering, and hydraulic assist should not mean fabricating your own mounts around it: this kit was verified to fit the Rock Jock Currectlync tie rod RJ-442101-101 and drag link RJ-442103-101, pairing them with either TSR kit. Other combinations risk unwanted contact between critical steering components, so the tested pairing is the one worth buying.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJeep builds running Rock Jock Currectlync steering and adding the Through Shaft Ram\u003c\/li\u003e\n\u003cli\u003eOwners combining premium linkage and hydraulic assist without custom fabrication\u003c\/li\u003e\n\u003cli\u003eWorkshops fitting TSR systems onto Currectlync-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Tie rod mounting bracket kit\u003c\/li\u003e\n\u003cli\u003eSKU: X02-10-012\u003c\/li\u003e\n\u003cli\u003eVerified Fit: Rock Jock Currectlync tie rod RJ-442101-101 and drag link RJ-442103-101\u003c\/li\u003e\n\u003cli\u003eVariant Fitment: For TSR kits X02-10-001 and X02-10-003\u003c\/li\u003e\n\u003cli\u003eBuyer Checks: Confirm your exact tie rod and drag link part numbers before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eThe verified combination is specific: Currectlync tie rod RJ-442101-101 with drag link RJ-442103-101, mounted to either Through Shaft Ram kit. If your part numbers differ, confirm the setup before ordering rather than adapting the kit - other tie rods or drag links may bring steering components into contact. Check clearances around the ram and linkage during installation.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eTie rod mounting bracket kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX02-10-012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVerified Fit\u003c\/td\u003e\n\u003ctd\u003eRock Jock Currectlync RJ-442101-101; RJ-442103-101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant Fitment\u003c\/td\u003e\n\u003ctd\u003eTSR kits X02-10-001 and X02-10-003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill it work with other Rock Jock parts?\u003c\/h3\u003e\u003cp\u003eThe kit was verified with the tie rod and drag link part numbers shown in the specifications. Other combinations may cause component contact, so confirm your exact parts before ordering.\u003c\/p\u003e\u003ch3\u003eDo I need a TSR kit first?\u003c\/h3\u003e\u003cp\u003eYes - the bracket exists to pair the Currectlync linkage with the Through Shaft Ram, so it belongs on builds running either TSR kit.\u003c\/p\u003e\u003cp\u003eConfirm your part numbers and combine the two systems the verified way - and if the ram itself is still unprotected, the \u003ca href=\"\/products\/apex-design-usa-tsr-through-shaft-ram-skid-plate\"\u003eTSR skid plate\u003c\/a\u003e finishes the job.\u003c\/p\u003e","published_at":"2026-07-18T13:56:12+01:00","created_at":"2026-07-17T11:14:11+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583295443286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X02-10-012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"75.00","grams":454,"compare_at_price":null,"position":1,"product_id":10982580617558,"created_at":"2026-07-17T11:14:11+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649788154198,"created_at":"2026-07-17T11:41:33+01:00","position":1,"updated_at":"2026-07-17T11:41:37+01:00","product_id":10982580617558,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/RockJockBracket_0df2e875-68a4-4bce-beeb-18bf3f7ecfa1.png?v=1784284897","width":2000,"height":2000},{"id":82649788186966,"created_at":"2026-07-17T11:41:33+01:00","position":2,"updated_at":"2026-07-17T11:41:37+01:00","product_id":10982580617558,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PXL_20260617_154610938_1_a636246e-a6b0-42f3-8c50-a751db4e0b13.jpg?v=1784284897","width":3072,"height":3072},{"id":82649788219734,"created_at":"2026-07-17T11:41:33+01:00","position":3,"updated_at":"2026-07-17T11:41:37+01:00","product_id":10982580617558,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/original_PXL_20260617_154802493_1_865dd433-6290-4f8d-a6a4-b07f8d75151e.jpg?v=1784284897","width":3072,"height":3072}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982578913622,"title":"APEX Design USA TSR Hydraulic Hose Bracket - FAD Housing Top Mount","handle":"apex-design-usa-tsr-axle-mount-high-mount","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA bracket secures the Through Shaft Ram hydraulic line to the top of the FAD housing, and is used with the TSR High Mount kit. The axle end of a hydraulic assist run is where movement and terrain meet the hoses, so a dedicated mounting point on the FAD housing keeps the line located and protected exactly where improvisation fails.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTSR High Mount installs fixing the hydraulic line at the axle end\u003c\/li\u003e\n\u003cli\u003eFinishing an assist hose run with every section properly mounted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: Hydraulic hose bracket\u003c\/li\u003e\n\u003cli\u003eSKU: X01-17-027\u003c\/li\u003e\n\u003cli\u003eMounting Position: Top of the FAD housing\u003c\/li\u003e\n\u003cli\u003eWorks With: TSR High Mount kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm you are running the High Mount version of the TSR and that your hose route crosses the FAD housing before ordering. Check hose movement through full steering and suspension travel after fitting so the secured line never pulls tight.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic hose bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX01-17-027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFAD housing, top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorks With\u003c\/td\u003e\n\u003ctd\u003eTSR High Mount kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo I need it with a standard-mount TSR?\u003c\/h3\u003e\u003cp\u003eIt is used with the High Mount kit - check which mount style your system runs before ordering.\u003c\/p\u003e\u003cp\u003eThe other hose mounts in the \u003ca href=\"\/collections\/steering-kits\"\u003eAPEX steering range\u003c\/a\u003e secure the rest of the run from box to ram.\u003c\/p\u003e","published_at":"2026-07-18T13:56:04+01:00","created_at":"2026-07-17T11:13:49+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583293247830,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X01-17-027","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"30.00","grams":167,"compare_at_price":null,"position":1,"product_id":10982578913622,"created_at":"2026-07-17T11:13:49+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649768591702,"created_at":"2026-07-17T11:41:21+01:00","position":1,"updated_at":"2026-07-17T11:41:25+01:00","product_id":10982578913622,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_112039_5a2e440d-3e06-401a-8ba6-fcb4b80b8c44.png?v=1784284885","width":1512,"height":1512},{"id":82649768624470,"created_at":"2026-07-17T11:41:21+01:00","position":2,"updated_at":"2026-07-17T11:41:24+01:00","product_id":10982578913622,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Photoroom_20250812_111947_1aa79115-8557-4d86-869c-fb412e2a71a6.png?v=1784284884","width":1512,"height":1512}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10982578127190,"title":"APEX Design USA Boost Kit O-Rings (Service Kit)","handle":"apex-design-usa-boost-kit-o-rings-service-kit","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis APEX Design USA service kit supplies replacement O-rings for the Steering Boost Kit. Seals are the wear item in any hydraulic hardware - renewing them keeps the boost system sealed and consistent instead of weeping its performance away, and having the kit on the shelf makes seal service a same-day job.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSteering Boost Kit owners servicing seals on schedule\u003c\/li\u003e\n\u003cli\u003eFixing a boost setup showing seepage or inconsistent feel\u003c\/li\u003e\n\u003cli\u003eTrip-prep servicing before long hauls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: APEX Design USA\u003c\/li\u003e\n\u003cli\u003eProduct Type: O-ring service kit\u003c\/li\u003e\n\u003cli\u003eSKU: X02-03-017\u003c\/li\u003e\n\u003cli\u003eCompatibility: APEX Steering Boost Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your system is the APEX Steering Boost Kit before ordering. Fit the O-rings clean with a light film of silicone grease, and check the system for leaks after reassembly before returning it to hard use.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAPEX Design USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eO-ring service kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eX02-03-017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAPEX Steering Boost Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhen should the O-rings be changed?\u003c\/h3\u003e\u003cp\u003eAt any sign of seepage or during planned service - hydraulic seals cost least when changed before they fail.\u003c\/p\u003e\u003cp\u003eAdd the \u003ca href=\"\/products\/apex-design-usa-silicone-grease-for-o-rings\"\u003esilicone O-ring grease\u003c\/a\u003e and the seal job is done properly.\u003c\/p\u003e","published_at":"2026-07-18T13:55:58+01:00","created_at":"2026-07-17T11:13:39+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"APEX DESIGN USA","product_type":"Performance","tags":["APEX DESIGN USA","brand:apex-design-usa","cat:driveline-steering","dept:performance-parts","type:steering-kits","universal-fit"],"variants":[{"id":54583290626390,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X02-03-017","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"8.00","grams":6,"compare_at_price":null,"position":1,"product_id":10982578127190,"created_at":"2026-07-17T11:13:39+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82649754042710,"created_at":"2026-07-17T11:41:13+01:00","position":1,"updated_at":"2026-07-17T11:41:16+01:00","product_id":10982578127190,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/WhatsAppImage2026-02-03at08.46.00-Photoroom_068c6c97-1329-404d-80f8-d8f49e774b90.png?v=1784284876","width":960,"height":1280}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953204203862,"title":"Apex Chassis KIT385 ProLock Steering Kit, Steel – Dodge Ram 2500\/3500 (2014+)","handle":"apex-chassis-kit385-prolock-steering-kit-steel-dodge-ram-2500-3500-2014","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT385 ProLock Steering Kit is the definitive answer to death wobble on a 2014-onwards Ram 2500 or 3500 4WD. These trucks combine a heavy solid front axle with serious towing loads, and the factory tie rod and drag link flex under exactly the conditions where you most need control. This kit replaces the linkage with massive DOM steel assemblies, oversized forged ends, set-screw jam nuts, Ninja lock washers and ProLock washers - plus the TR203 bracket that keeps the steering damper in its factory location. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2014+ Ram 2500\/3500 4WD trucks with death wobble or load-sensitive wander\u003c\/li\u003e\n\u003cli\u003eHeavy towing setups where steering precision at weight is non-negotiable\u003c\/li\u003e\n\u003cli\u003eTrucks on larger tyres that flex the factory linkage\u003c\/li\u003e\n\u003cli\u003eOwners rebuilding the steering once with extreme-duty locked components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLocked Geometry, Factory Damper Position\u003c\/h2\u003e\u003cp\u003eThe ProLock system - keyway washers machined into the tie rod end threads plus jam nuts with integrated set screws - mechanically prevents the rods rotating out of adjustment. The included TR203 bracket mounts the steering damper in its original position, so the truck keeps factory-style damping on top of the stronger linkage. Compared with another set of factory parts, this is the difference between re-treating symptoms and removing the cause.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Complete steering kit (tie rod and drag link)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT385-STL\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Extreme-duty DOM steel tie rod and drag link assembly, oversized ends, jam nuts with 3 set screws, Ninja lock washers, ProLock washers, TR203 OE-location damper bracket\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Dodge Ram 2500 (2014-2026) 4WD; Ram 3500 (2014-2026) 4WD\u003c\/li\u003e\n\u003cli\u003eStabiliser Note: Not compatible with the Rough Country dual stabiliser; other dual setups may need modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your truck's year and model before ordering - fitment shown is manufacturer reference. If you run a dual steering stabiliser, check it against the oversized components first: the Rough Country dual setup is not compatible, and others may need modification. Plan a full alignment after installation and set the ProLock hardware to spec so the locking system holds the geometry.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete steering kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT385-STL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDOM steel assemblies; forged oversized ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking System\u003c\/td\u003e\n\u003ctd\u003eProLock washers; Ninja lock washers; set-screw jam nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Bracket\u003c\/td\u003e\n\u003ctd\u003eTR203, factory location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eRam 2500\/3500 2014-2026 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStabiliser Note\u003c\/td\u003e\n\u003ctd\u003eRough Country dual stabiliser not compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this actually stop death wobble?\u003c\/h3\u003e\u003cp\u003eIt replaces the flexing, self-loosening linkage that drives wobble on these trucks with oversized locked components. Check track bar, ball joints and damper condition in the same job so nothing worn is left behind.\u003c\/p\u003e\u003ch3\u003eCan I keep my dual steering stabiliser?\u003c\/h3\u003e\u003cp\u003eThe Rough Country dual setup is not compatible, and other dual stabilisers may need modification to clear the oversized components. Check yours against the kit before ordering.\u003c\/p\u003e\u003ch3\u003eDoes the steering damper stay in the stock position?\u003c\/h3\u003e\u003cp\u003eYes - the included TR203 bracket mounts the damper in its factory location.\u003c\/p\u003e\u003cp\u003eWorn joints under the same truck? The \u003ca href=\"\/products\/apex-chassis-kit111-ball-joint-kit-dodge-ram-2500-3500-4wd-2014\"\u003eKIT111 ball joint kit\u003c\/a\u003e completes the front-end rebuild.\u003c\/p\u003e","published_at":"2026-07-09T09:26:52+01:00","created_at":"2026-07-08T15:02:06+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","Dodge Ram","fits:ram-2500","fits:ram-3500","make:ram","Steering Kit","type:steering-kits"],"variants":[{"id":54474222731606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT385-STL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"2060.00","grams":12000,"compare_at_price":null,"position":1,"product_id":10953204203862,"created_at":"2026-07-08T15:02:06+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82239138201942,"created_at":"2026-07-08T15:02:06+01:00","position":1,"updated_at":"2026-07-08T15:02:08+01:00","product_id":10953204203862,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/385-_polsh_alum_ninja_w_clamp.jpg?v=1783519328","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953202532694,"title":"Apex Chassis KIT375 ProLock Steering Kit, Steel – Ford F-250\/F-350 Super Duty (2017+)","handle":"apex-chassis-kit375-prolock-steering-kit-steel-ford-f-250-f-350-super-duty-2017","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT375 ProLock Steering Kit rebuilds the steering linkage on a 2017-onwards Ford F-250 or F-350 Super Duty with extreme-duty steel. Super Duty trucks haul, tow and plough at weights that flex the factory tie rod and drag link - the classic route to death wobble and steering that never feels planted. This kit replaces the linkage with massive DOM steel assemblies, oversized forged ends, proprietary set-screw jam nuts and ProLock washers, so the geometry you set is the geometry that stays. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2017+ F-250\/F-350 4WD work and towing trucks with wander or wobble under load\u003c\/li\u003e\n\u003cli\u003eTrucks on larger tyres that have outgrown the factory linkage\u003c\/li\u003e\n\u003cli\u003eFleet and plough trucks that cannot afford steering drama mid-season\u003c\/li\u003e\n\u003cli\u003eOwners fixing the linkage once with extreme-duty components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Complete steering kit (tie rod and drag link)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT375-STL\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Extreme-duty DOM steel tie rod and drag link assembly, oversized ends, proprietary jam nuts with 3 set screws, ProLock washers\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Ford F-250 Super Duty (2017-2026) 4WD; F-350 Super Duty (2017-2026) 4WD\u003c\/li\u003e\n\u003cli\u003eExclusions: Wide-track models not covered\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your truck's year and that it is not a wide-track model before ordering - fitment shown is manufacturer reference. The oversized components sit larger than factory, so if you run a dual steering stabiliser, check clearance and mounting against this kit before committing. Plan a full alignment after installation and torque the ProLock hardware to spec so the locking system does its job.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete steering kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT375-STL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDOM steel assemblies; forged oversized ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking System\u003c\/td\u003e\n\u003ctd\u003eProLock washers; set-screw jam nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eFord F-250\/F-350 Super Duty 2017-2026 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExcluded Application\u003c\/td\u003e\n\u003ctd\u003eWide-track models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this fix death wobble on my Super Duty?\u003c\/h3\u003e\u003cp\u003eIt removes the linkage flex and self-loosening that drive wobble on these trucks. Inspect track bar, ball joints and damper as part of the job - the cure sticks when the whole system is sound.\u003c\/p\u003e\u003ch3\u003eDoes it fit wide-track trucks?\u003c\/h3\u003e\u003cp\u003eNo - wide-track models are excluded from the application. Confirm your truck's spec before ordering.\u003c\/p\u003e\u003ch3\u003eWhat makes ProLock different from standard jam nuts?\u003c\/h3\u003e\u003cp\u003eKeyway washers and set-screw jam nuts mechanically stop the rods rotating, so the alignment you set survives hard use instead of working loose.\u003c\/p\u003e\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/steering-kits\"\u003eheavy-duty steering kits\u003c\/a\u003e for other platforms in the fleet.\u003c\/p\u003e","published_at":"2026-07-09T09:26:52+01:00","created_at":"2026-07-08T15:01:44+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:ford-super-duty","Ford Super Duty","make:ford","Steering Kit","type:steering-kits"],"variants":[{"id":54474214834518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT375-STL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"2055.00","grams":12000,"compare_at_price":null,"position":1,"product_id":10953202532694,"created_at":"2026-07-08T15:01:44+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82239130501462,"created_at":"2026-07-08T15:01:44+01:00","position":1,"updated_at":"2026-07-08T15:01:47+01:00","product_id":10953202532694,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT375_Blk_Steel_2_952d8858-a672-4329-aab0-7696d44dd47c.jpg?v=1783519307","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953199714646,"title":"Apex Chassis KIT155 1-Ton Steering Kit, Polished Aluminium – Jeep Wrangler JK","handle":"apex-chassis-kit155-1-ton-steering-kit-polished-aluminium-jeep-wrangler-jk","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT155 1-Ton Steering Kit replaces the JK's factory tie rod and drag link with polished aluminium rods and forged steel ends - serious reinforcement for a 2007-2018 Wrangler that works for a living. Factory linkage flex is what turns bigger tyres into wander and wobble; this kit's 1-ton components with integrated adjusting sleeves and Ninja lock washers put precision back into the system at a lower price point than the 2.5-ton flagship. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJK builds on moderate tyre sizes wanting a proper linkage upgrade\u003c\/li\u003e\n\u003cli\u003eOwners fixing wander and vague steering without going to the 2.5-ton kit\u003c\/li\u003e\n\u003cli\u003eStock-wheel and standard-offset builds (AEV\/Rubicon wheels need a 1.5 inch spacer)\u003c\/li\u003e\n\u003cli\u003eDrivers who want the polished aluminium look with forged-end strength\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Complete steering kit (tie rod and drag link)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT155NF\u003c\/li\u003e\n\u003cli\u003eRating: 1-ton components\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Polished aluminium tie rod and drag link with integrated adjusting sleeves, forged steel ends, 4x Ninja lock washers\u003c\/li\u003e\n\u003cli\u003eAxle Fitment: Stock Dana 30\/44\u003c\/li\u003e\n\u003cli\u003eWheel Note: AEV \/ Rubicon wheels require a 1.5 inch spacer\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Wrangler JK (2007-2018) 4WD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your JK runs stock Dana 30\/44 axles before ordering - fitment shown is manufacturer reference. Check your wheels first: AEV and factory Rubicon wheels need a 1.5 inch spacer with this kit, so if you run them and want a no-spacer fit, step up to the \u003ca href=\"\/products\/apex-chassis-kit140-2-5-ton-prolock-steering-kit-polished-aluminium-jeep-wrangler-jk\"\u003e2.5-ton KIT140\u003c\/a\u003e instead. Plan a full alignment after installation.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete steering kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT155NF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e1-ton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolished aluminium rods; forged steel ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Fitment\u003c\/td\u003e\n\u003ctd\u003eStock Dana 30\/44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Note\u003c\/td\u003e\n\u003ctd\u003eAEV \/ Rubicon wheels need 1.5 inch spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Wrangler JK 2007-2018 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003e1-ton or 2.5-ton - which do I need?\u003c\/h3\u003e\u003cp\u003eThe 1-ton KIT155 is a big step over factory linkage and suits moderate builds. If you run heavy tyres, hard trail miles or AEV\/Rubicon wheels you want cleared without a spacer, the 2.5-ton KIT140 is the stronger choice.\u003c\/p\u003e\u003ch3\u003eWhy do AEV and Rubicon wheels need a spacer?\u003c\/h3\u003e\u003cp\u003eThe oversized linkage sits closer to those wheel designs, so a 1.5 inch spacer restores clearance. Check your wheel spec before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it fit lifted JKs?\u003c\/h3\u003e\u003cp\u003eIt fits stock Dana 30\/44 axles. Confirm any high-steer or aftermarket knuckle setup against the kit before ordering.\u003c\/p\u003e\u003cp\u003eFinish the front end with the \u003ca href=\"\/products\/apex-chassis-kit102-hd-ball-joint-kit-jeep-wrangler-jk-grand-cherokee\"\u003eKIT102 ball joint kit\u003c\/a\u003e while the steering is apart.\u003c\/p\u003e","published_at":"2026-07-09T09:26:53+01:00","created_at":"2026-07-08T15:01:28+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:jeep-wrangler-jk","Jeep Wrangler JK","make:jeep","Steering Kit","type:steering-kits"],"variants":[{"id":54474207068502,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT155NF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1175.00","grams":8000,"compare_at_price":null,"position":1,"product_id":10953199714646,"created_at":"2026-07-08T15:01:28+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82239121686870,"created_at":"2026-07-08T15:01:28+01:00","position":1,"updated_at":"2026-07-08T15:01:30+01:00","product_id":10953199714646,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT155-1.jpg?v=1783519290","width":1000,"height":1000}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953196962134,"title":"Apex Chassis KIT140 2.5-Ton ProLock Steering Kit, Polished Aluminium – Jeep Wrangler JK","handle":"apex-chassis-kit140-2-5-ton-prolock-steering-kit-polished-aluminium-jeep-wrangler-jk","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT140 2.5-Ton ProLock Steering Kit gives a built JK the steering its tyres deserve. The 2007-2018 Wrangler JK is the most modified Jeep on the road, and its factory tie rod and drag link are the known weak point once 35s, lockers and trail miles arrive - flex, worn adjusters and death wobble follow. This kit replaces the lot with 2.5-ton polished aluminium rods, integrated adjusting sleeves, forged steel ends and ProLock locking hardware, and it clears AEV and factory Rubicon wheels with no spacer needed. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJK builds on 35s and larger where the factory linkage flexes and wanders\u003c\/li\u003e\n\u003cli\u003eOwners who have chased death wobble through cheaper part-by-part fixes\u003c\/li\u003e\n\u003cli\u003eAEV and Rubicon-wheeled JKs - this kit needs no wheel spacer\u003c\/li\u003e\n\u003cli\u003eLong-term builds that want steering set once and locked\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Complete steering kit (tie rod and drag link)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT140NF\u003c\/li\u003e\n\u003cli\u003eRating: 2.5-ton components\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Polished aluminium tie rod and drag link with integrated adjusting sleeves, forged steel ends, ProLock washers\u003c\/li\u003e\n\u003cli\u003eAxle Fitment: Stock Dana 30\/44\u003c\/li\u003e\n\u003cli\u003eWheel Compatibility: AEV \/ factory Rubicon wheels, no spacer needed\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Wrangler JK (2007-2018) 4WD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your JK runs stock Dana 30\/44 axles before ordering - fitment shown is manufacturer reference. If the build carries aftermarket knuckles, a dual stabiliser or high-steer parts, check clearance against the oversized components first. Fit, set the ProLock hardware, then book a full alignment; the locking system holds that setting through the abuse that used to undo it.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete steering kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT140NF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e2.5-ton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolished aluminium rods; forged steel ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Fitment\u003c\/td\u003e\n\u003ctd\u003eStock Dana 30\/44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Compatibility\u003c\/td\u003e\n\u003ctd\u003eAEV \/ factory Rubicon, no spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Wrangler JK 2007-2018 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow is this different from the KIT155 1-ton kit?\u003c\/h3\u003e\u003cp\u003eKIT140 uses 2.5-ton components and clears AEV\/Rubicon wheels without a spacer; the 1-ton KIT155 is the lighter-duty version and needs a 1.5 inch spacer with those wheels. For heavy tyres and hard use, this is the stronger route.\u003c\/p\u003e\u003ch3\u003eWill it stop my death wobble?\u003c\/h3\u003e\u003cp\u003eIt removes the linkage flex and self-loosening that feed wobble. Inspect track bar, ball joints and damper too - the fix sticks when every worn part is addressed.\u003c\/p\u003e\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\u003cp\u003eYes - set the geometry, lock the ProLock hardware, and the setting stays put.\u003c\/p\u003e\u003cp\u003eDoing the joints at the same time? The \u003ca href=\"\/products\/apex-chassis-kit102-hd-ball-joint-kit-jeep-wrangler-jk-grand-cherokee\"\u003eKIT102 ball joint kit\u003c\/a\u003e covers the same JK front axle.\u003c\/p\u003e","published_at":"2026-07-09T09:26:54+01:00","created_at":"2026-07-08T15:01:15+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:jeep-wrangler-jk","Jeep Wrangler JK","make:jeep","Steering Kit","type:steering-kits"],"variants":[{"id":54474200645974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT140NF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1800.00","grams":11000,"compare_at_price":null,"position":1,"product_id":10953196962134,"created_at":"2026-07-08T15:01:15+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82239116509526,"created_at":"2026-07-08T15:01:15+01:00","position":1,"updated_at":"2026-07-08T15:01:18+01:00","product_id":10953196962134,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT140NF-1.jpg?v=1783519278","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953194766678,"title":"Apex Chassis KIT125 2.5-Ton ProLock Steering Kit, Polished Aluminium (Dana 44) – Jeep Wrangler JL \u0026 Gladiator JT","handle":"apex-chassis-kit125-2-5-ton-prolock-steering-kit-polished-aluminium-dana-44-jeep-wrangler-jl-gladiator-jt","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT125 2.5-Ton ProLock Steering Kit replaces the factory tie rod and drag link on a Wrangler JL or Gladiator JT with steering hardware built for big tyres and real terrain. Factory linkages flex and work loose as tyre size and trail speed rise - the well-known route to death wobble and vague, nervous steering. This kit answers it with 2.5-ton rated polished aluminium rods, integrated adjusting sleeves, forged steel ends and the ProLock locking system that stops tie rod rotation once set. It fits the stock Dana 30\/44 axles with the standard under-knuckle mount. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJL and JT builds on larger tyres that have outgrown the factory linkage\u003c\/li\u003e\n\u003cli\u003eOwners chasing out death wobble with properly oversized steering components\u003c\/li\u003e\n\u003cli\u003eShow-and-go builds where the polished aluminium look matters as much as the strength\u003c\/li\u003e\n\u003cli\u003eTrail rigs needing steering that stays adjusted through repeated hard use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe ProLock Difference\u003c\/h2\u003e\u003cp\u003eMost steering kits rely on jam nuts alone to hold adjustment. ProLock uses a machined keyway cut into the tie rod end threads with a matching keyway washer, plus proprietary jam nuts carrying set screws - so once your alignment is set, the linkage cannot rotate itself loose. On a Jeep that sees rocks, ruts and full-lock abuse, that is the difference between an alignment that lasts a day and one that lasts.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: Complete steering kit (tie rod and drag link)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT125D44NF\u003c\/li\u003e\n\u003cli\u003eRating: 2.5-ton components\u003c\/li\u003e\n\u003cli\u003eIncluded Items: Polished aluminium tie rod and drag link with integrated adjusting sleeves, forged steel ends, ProLock washers\u003c\/li\u003e\n\u003cli\u003eAxle Fitment: Stock Dana 30\/44, under-knuckle (standard) mount\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Wrangler JL (2018-2026) 4WD; Jeep Gladiator JT (2019-2026) 4WD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your Jeep is a JL or JT on stock Dana 30\/44 axles with under-knuckle steering before ordering - fitment shown is manufacturer reference. Aftermarket knuckles, high-steer setups or dual stabilisers need checking against the kit's oversized components before you commit. Plan a full alignment after installation and set the ProLock hardware to spec.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete steering kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT125D44NF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e2.5-ton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolished aluminium rods; forged steel ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Fitment\u003c\/td\u003e\n\u003ctd\u003eStock Dana 30\/44, under-knuckle mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Wrangler JL 2018-2026; Gladiator JT 2019-2026 (4WD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking System\u003c\/td\u003e\n\u003ctd\u003eProLock keyway washers and set-screw jam nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this cure my death wobble?\u003c\/h3\u003e\u003cp\u003eIt replaces the flex-prone factory tie rod and drag link with oversized locked components, which removes a major cause. Check track bar, ball joints and damper at the same time - wobble is usually a sum of worn parts.\u003c\/p\u003e\u003ch3\u003eDoes it fit lifted JLs?\u003c\/h3\u003e\u003cp\u003eThe kit fits stock Dana 30\/44 axles with under-knuckle steering. If your build runs a high-steer conversion or aftermarket knuckles, confirm compatibility before ordering.\u003c\/p\u003e\u003ch3\u003eAluminium rods on rocks - is that wise?\u003c\/h3\u003e\u003cp\u003eThe 2.5-ton rated aluminium used here is oversized far beyond the factory linkage, paired with forged steel ends. It is a proven combination on hard-used Jeeps, and the polished finish is part of the appeal.\u003c\/p\u003e\u003cp\u003ePair it with the \u003ca href=\"\/products\/apex-chassis-kit113-ball-joint-kit-jeep-wrangler-jl-gladiator-jt\"\u003eKIT113 ball joint kit\u003c\/a\u003e and the JL or JT front end is rebuilt properly in one pass.\u003c\/p\u003e","published_at":"2026-07-09T09:26:54+01:00","created_at":"2026-07-08T15:00:57+01:00","updated_at":"2026-09-09T18:41:05+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:jeep-gladiator-jt","fits:jeep-wrangler-jl","Jeep Gladiator","Jeep Wrangler JL","make:jeep","Steering Kit","type:steering-kits"],"variants":[{"id":54474195894614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT125D44NF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1800.00","grams":11000,"compare_at_price":null,"position":1,"product_id":10953194766678,"created_at":"2026-07-08T15:00:58+01:00","updated_at":"2026-09-09T18:41:05+01:00"}],"images":[{"id":82239110676822,"created_at":"2026-07-08T15:00:58+01:00","position":1,"updated_at":"2026-07-08T15:01:00+01:00","product_id":10953194766678,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT125NF-1_ce7bb6f7-4787-452b-9822-ae06f29254db.jpg?v=1783519260","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]}]}