{"products":[{"id":11149775470934,"title":"Almont Mercedes-Benz Sprinter 2 W906 2WD-RWD Front Skid Plate","handle":"almont-sprinter-2-w906-2wd-rwd-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eYou do not need a 4x4 badge to leave tarmac: W906 Sprinter campers and work vans in 2WD rear-drive form cross the same farm pitches, gravel yards and rutted lanes, just with less clearance to spare. This Almont front skid plate for the Mercedes-Benz Sprinter 2 W906 2WD-RWD puts 16.5 kg of certified EN AW-5083 H111 duralumin, 6mm SportDuty grade, under the front end so ramps, crests and buried rocks scrape plate rather than van. It mounts to the original chassis holes with the supplied steel brackets and pre-installed bolts, and Almont covers cracking of the plate for 3 years.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear-drive W906 camper conversions overnighting on rough ground\u003c\/li\u003e\n\u003cli\u003eCouriers and trades grounding the nose on ramps and kerbs\u003c\/li\u003e\n\u003cli\u003eOwners protecting an older van they intend to keep working\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2 W906, 2WD rear-wheel drive\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS2AR6\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFor the 2WD rear-drive W906; the CDI 4x4 uses its own front plates\u003c\/li\u003e\n\u003cli\u003eFits the original front end and chassis points; no drilling into the van\u003c\/li\u003e\n\u003cli\u003eNot compatible with a body-lift or modified chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGuard the tank as well with the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-72l-standard-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-72l-standard-range-skid-plate\"\u003eW906\/W907 2WD 72L fuel tank plate\u003c\/a\u003e or the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-93l-long-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-93l-long-range-skid-plate\"\u003e93L long-range version\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS2AR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 2 W906, 2WD-RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill it fit my 4x4 Sprinter?\u003c\/h3\u003e\u003cp\u003eNo. This plate is for the 2WD rear-drive W906. The CDI 4x4 has a different front structure and its own Almont plate, so check your driveline before ordering.\u003c\/p\u003e\u003ch3\u003eWhy protect a road-biased van?\u003c\/h3\u003e\u003cp\u003eBecause the front underside sits low, and one hard kerb, ramp lip or hidden rock costs more than the plate. The 6mm duralumin takes the hit and can be replaced.\u003c\/p\u003e","published_at":"2026-07-30T22:28:26+01:00","created_at":"2026-07-29T16:24:45+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179299670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS2AR6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"851.76","grams":16500,"compare_at_price":null,"position":1,"product_id":11149775470934,"created_at":"2026-07-29T16:24:45+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223349526870,"created_at":"2026-07-29T16:24:45+01:00","position":1,"updated_at":"2026-07-29T16:24:47+01:00","product_id":11149775470934,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS2AR6-Frontal-Mercedes-Sprinter-W906-2WD-RWD.webp?v=1785338687","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775602006,"title":"Almont Mercedes-Benz Sprinter 2 W906 CDI 4x4 Front Skid Plate","handle":"almont-sprinter-2-w906-cdi-4x4-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe W906 CDI 4x4 is the van that built the Sprinter's overland reputation, and the front underside is where that reputation gets tested first on rock steps, ruts and steep loose climbs. This Almont front skid plate for the Mercedes-Benz Sprinter 2 W906 CDI 4x4, 2006-2016, is cut from certified EN AW-5083 H111 duralumin with a choice of 6mm SportDuty or 8mm HeavyDuty thickness, each in two front-plate versions to suit the van's configuration. The kit bolts to original chassis points with steel brackets and pre-installed bolts and carries a 3-year warranty against cracking.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eW906 4x4 expedition campers touring rock, sand and winter routes\u003c\/li\u003e\n\u003cli\u003eOwners choosing 8mm for a heavy, loaded van per Almont's duty guidance\u003c\/li\u003e\n\u003cli\u003eStarting a staged underbody build ahead of the gearbox and tank plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2 W906 CDI 4x4, 2006-2016\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eTwo front-plate versions per duty; match the version to your van before ordering\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo front-plate versions exist in each thickness; send us your registration and we will confirm which your van takes\u003c\/li\u003e\n\u003cli\u003eAlmont advises 6mm for lighter use and 8mm for heavy vehicles and continental overland travel; a loaded 4x4 camper leans 8mm\u003c\/li\u003e\n\u003cli\u003eA winch can go on before or after; body-lifts and modified chassis rule the plate out\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eContinue rearwards with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-gearbox-and-transfer-skid-plate-sprinter-3-w907-4x4-manual-automatic-gearbox-transferskid-plate\"\u003eW906\/W907 4x4 gearbox and transfer plate\u003c\/a\u003e and the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate\"\u003e4x4 fuel tank plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS2A6 \/ PDMBS2A26 (6mm); PDMBS2A8 \/ PDMBS2A28 (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 2 W906 CDI 4x4, 2006-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich of the two front-plate versions do I need?\u003c\/h3\u003e\u003cp\u003eIt depends on your van's front configuration. Pick the variant matching your part number if you know it, or send us your registration and build details and we will confirm before you order.\u003c\/p\u003e\u003ch3\u003e6mm or 8mm for a W906 4x4 camper?\u003c\/h3\u003e\u003cp\u003eAlmont recommends 6mm for lighter off-road use and 8mm for heavier vehicles and long overland routes with rock and desert. A converted 4x4 Sprinter is a heavy van, so most tourers take the 8mm.\u003c\/p\u003e","published_at":"2026-07-30T22:28:34+01:00","created_at":"2026-07-29T16:24:48+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179430742,"title":"HeavyDuty 8mm \/ PDMBS2A28","option1":"HeavyDuty 8mm","option2":"PDMBS2A28","option3":null,"sku":"PDMBS2A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"904.68","grams":20700,"compare_at_price":null,"position":1,"product_id":11149775602006,"created_at":"2026-07-29T16:24:49+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179463510,"title":"HeavyDuty 8mm \/ PDMBS2A8","option1":"HeavyDuty 8mm","option2":"PDMBS2A8","option3":null,"sku":"PDMBS2A8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"904.68","grams":20700,"compare_at_price":null,"position":2,"product_id":11149775602006,"created_at":"2026-07-29T16:24:49+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179496278,"title":"SportDuty 6mm \/ PDMBS2A26","option1":"SportDuty 6mm","option2":"PDMBS2A26","option3":null,"sku":"PDMBS2A26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"728.28","grams":20000,"compare_at_price":null,"position":3,"product_id":11149775602006,"created_at":"2026-07-29T16:24:49+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179529046,"title":"SportDuty 6mm \/ PDMBS2A6","option1":"SportDuty 6mm","option2":"PDMBS2A6","option3":null,"sku":"PDMBS2A6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"728.28","grams":20000,"compare_at_price":null,"position":4,"product_id":11149775602006,"created_at":"2026-07-29T16:24:49+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223349690710,"created_at":"2026-07-29T16:24:49+01:00","position":1,"updated_at":"2026-07-29T16:24:51+01:00","product_id":11149775602006,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS2A-Proteccion-Frontal-W906-4x4-1.jpg?v=1785338691","width":1080,"height":1080}],"options":[{"name":"Duty","position":1,"values":["HeavyDuty 8mm","SportDuty 6mm"]},{"name":"Front Type","position":2,"values":["PDMBS2A28","PDMBS2A8","PDMBS2A26","PDMBS2A6"]}]},{"id":11149775765846,"title":"Almont Mercedes-Benz Sprinter 3 W907 2WD-RWD Front Skid Plate","handle":"almont-sprinter-3-w907-2wd-rwd-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003ePlenty of W907 Sprinter campers never get all-wheel drive and never needed it, but the front underside still meets sloped ferry ramps, rutted field gates and buried stone on the way to the pitch. This Almont front skid plate for the rear-drive Mercedes-Benz Sprinter 3 W907 2WD-RWD carries 16.5 kg of certified EN AW-5083 H111 duralumin, 6mm SportDuty grade, under the nose so those first contacts scar a replaceable plate. It mounts to the van's original chassis holes with steel brackets and pre-installed bolts, with a 3-year warranty against cracking on the plate itself.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear-drive W907 camper conversions leaving hard standing regularly\u003c\/li\u003e\n\u003cli\u003eDelivery and trade Sprinters that ground the front on ramps and kerbs\u003c\/li\u003e\n\u003cli\u003eThe first piece of underbody cover on a new build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 3 W907, 2WD rear-wheel drive\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS3AR6\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear-drive W907 only; 4x4 and 4Matic vans use their own front plates\u003c\/li\u003e\n\u003cli\u003eConfirm the front bumper is standard before ordering\u003c\/li\u003e\n\u003cli\u003eBody-lift kits and modified chassis are excluded; raised suspension is fine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch it with the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-72l-standard-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-72l-standard-range-skid-plate\"\u003e2WD 72L fuel tank plate\u003c\/a\u003e or the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-93l-long-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-93l-long-range-skid-plate\"\u003e93L long-range tank plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS3AR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 3 W907, 2WD-RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this the right plate for a 4Matic van?\u003c\/h3\u003e\u003cp\u003eNo. This part fits the 2WD rear-drive W907. All-wheel-drive W907 and VS30 vans take different front plates, so check your driveline first.\u003c\/p\u003e\u003ch3\u003eHow does 6mm duralumin hold up on a heavy van?\u003c\/h3\u003e\u003cp\u003eThe 6mm SportDuty grade is Almont's fit for lighter duty and mixed use. It is there to absorb scrapes and strikes ahead of the bodywork, and the plate is warranted against cracking for 3 years.\u003c\/p\u003e","published_at":"2026-07-30T22:28:43+01:00","created_at":"2026-07-29T16:24:55+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179791190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS3AR6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"851.76","grams":16500,"compare_at_price":null,"position":1,"product_id":11149775765846,"created_at":"2026-07-29T16:24:55+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350640982,"created_at":"2026-07-29T16:24:55+01:00","position":1,"updated_at":"2026-07-29T16:24:58+01:00","product_id":11149775765846,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS3AR6-Frontal-Mercedes-Sprinter-W907-2wd-RWD.webp?v=1785338698","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775798614,"title":"Almont Mercedes-Benz Sprinter 3 W907 4x4 Front Skid Plate","handle":"almont-sprinter-3-w907-4x4-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe W907 4x4 is the default base for serious van conversions, and serious conversions go where front-end strikes happen: rock steps, rutted climbs, washouts and steep loose descents. This Almont front skid plate for the Mercedes-Benz Sprinter 3 W907 4x4 is certified EN AW-5083 H111 duralumin in your choice of 6mm SportDuty or 8mm HeavyDuty, with versions for the original bumper and for vans running a Van Compass bumper. The kit bolts to original chassis points with steel brackets and pre-installed bolts and carries Almont's 3-year cracking warranty.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eW907 4x4 expedition and adventure van builds\u003c\/li\u003e\n\u003cli\u003eVans already converted with a Van Compass front end\u003c\/li\u003e\n\u003cli\u003eHeavier campers taking the 8mm option per Almont's duty guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 3 W907 4x4\u003c\/li\u003e\n\u003cli\u003eBumper versions: original bumper, or Van Compass bumper (VC variants)\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePick the VC variant only if your van actually runs the Van Compass bumper\u003c\/li\u003e\n\u003cli\u003eThe VS30 4Matic (from late 2022) takes a separate plate, so check which W907 you have\u003c\/li\u003e\n\u003cli\u003eA winch can be fitted before or after the plate; body-lifts are excluded\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis front plate is also the recommended partner for the W907 recovery point kit; carry on with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-gearbox-and-transfer-skid-plate-sprinter-3-w907-4x4-manual-automatic-gearbox-transferskid-plate\"\u003e4x4 gearbox and transfer plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS3A6 \/ PDMBS3A6VC (6mm); PDMBS3A8 \/ PDMBS3A8VC (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 3 W907 4x4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat does the VC version mean?\u003c\/h3\u003e\u003cp\u003eVC variants are shaped for W907 4x4 vans fitted with a Van Compass bumper. Standard variants fit the original front end. Choose by what is on your van today.\u003c\/p\u003e\u003ch3\u003eWhich thickness for a built-out adventure van?\u003c\/h3\u003e\u003cp\u003eAlmont points heavy vehicles and continental overland use to 8mm and lighter duty to 6mm. Most loaded W907 4x4 conversions take the 8mm.\u003c\/p\u003e","published_at":"2026-07-30T22:28:46+01:00","created_at":"2026-07-29T16:24:57+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179823958,"title":"PDMBS3A6","option1":"PDMBS3A6","option2":null,"option3":null,"sku":"PDMBS3A6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"728.28","grams":22000,"compare_at_price":null,"position":1,"product_id":11149775798614,"created_at":"2026-07-29T16:24:57+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179856726,"title":"PDMBS3A6VC","option1":"PDMBS3A6VC","option2":null,"option3":null,"sku":"PDMBS3A6VC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"728.28","grams":22000,"compare_at_price":null,"position":2,"product_id":11149775798614,"created_at":"2026-07-29T16:24:57+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179889494,"title":"PDMBS3A8","option1":"PDMBS3A8","option2":null,"option3":null,"sku":"PDMBS3A8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"904.68","grams":25000,"compare_at_price":null,"position":3,"product_id":11149775798614,"created_at":"2026-07-29T16:24:57+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179922262,"title":"PDMBS3A8VC","option1":"PDMBS3A8VC","option2":null,"option3":null,"sku":"PDMBS3A8VC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"904.68","grams":25000,"compare_at_price":null,"position":4,"product_id":11149775798614,"created_at":"2026-07-29T16:24:57+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350673750,"created_at":"2026-07-29T16:24:57+01:00","position":1,"updated_at":"2026-07-29T16:24:59+01:00","product_id":11149775798614,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Mercedes-Benz-W907.jpg?v=1785338699","width":1080,"height":1080}],"options":[{"name":"Front Type","position":1,"values":["PDMBS3A6","PDMBS3A6VC","PDMBS3A8","PDMBS3A8VC"]}]},{"id":11149775503702,"title":"Almont Mercedes-Benz Sprinter W906 and W907 2WD-RWD 72L Fuel Tank Skid Plate","handle":"almont-sprinter-2-w906-2wd-rwd-fuel-tank-72l-standard-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-72l-standard-range-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe 72-litre tank under a rear-drive Sprinter is a big plastic target for rocks, ruts and site debris, and losing diesel through a split tank strands the van wherever it happens. This Almont plate covers the 72L standard-range fuel tank on the Mercedes-Benz Sprinter 2 W906 and Sprinter 3 W907 in 2WD-RWD form, using certified EN AW-5083 H111 duralumin in 6mm SportDuty grade at 13.3 kg. It bolts to original chassis points with the supplied steel brackets, comes with pre-installed bolts and a certificate and instruction manual, and is warranted against cracking for 3 years.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eW906 and W907 rear-drive campers touring unsurfaced pitches\u003c\/li\u003e\n\u003cli\u003eFleet Sprinters working yards, farms and events on rough ground\u003c\/li\u003e\n\u003cli\u003eVans with the standard 72L tank rather than the long-range option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2 W906 and Sprinter 3 W907, 2WD-RWD\u003c\/li\u003e\n\u003cli\u003eCoverage: 72L standard-range fuel tank\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 13.3 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS23DR6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCheck your tank size first: vans with the 93L long-range tank need the separate long-range plate\u003c\/li\u003e\n\u003cli\u003eFor 2WD rear-drive models; 4x4 Sprinters use their own tank plate\u003c\/li\u003e\n\u003cli\u003eCannot be fitted over an aftermarket enlarged tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRunning the bigger tank? Use the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-93l-long-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-93l-long-range-skid-plate\"\u003e93L long-range tank plate\u003c\/a\u003e instead, and see the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-front-skid-plate\"\u003eW906 2WD front plate\u003c\/a\u003e for the nose.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS23DR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter 2 W906 and Sprinter 3 W907, 2WD-RWD, 72L standard-range tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow do I check which tank my Sprinter has?\u003c\/h3\u003e\u003cp\u003eLook at the fuel capacity in your handbook or spec sheet: 72 litres means this plate, 93 litres means the long-range version. If in doubt, send us your registration and we will help.\u003c\/p\u003e\u003ch3\u003eDoes it fit both Sprinter generations?\u003c\/h3\u003e\u003cp\u003eYes. The W906 and the W907 in 2WD rear-drive form share this part for the 72L tank.\u003c\/p\u003e\u003ch3\u003eWill it fit a 4x4 or 4Matic Sprinter?\u003c\/h3\u003e\u003cp\u003eNo. All-wheel-drive Sprinters take a different Almont tank plate, so confirm your driveline before ordering.\u003c\/p\u003e","published_at":"2026-07-30T22:28:29+01:00","created_at":"2026-07-29T16:24:46+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179332438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS23DR6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"550.62","grams":13300,"compare_at_price":null,"position":1,"product_id":11149775503702,"created_at":"2026-07-29T16:24:46+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223349592406,"created_at":"2026-07-29T16:24:46+01:00","position":1,"updated_at":"2026-07-29T16:24:48+01:00","product_id":11149775503702,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS23DR6-Diposit-72L-Mercedes-Sprinter-W906-2WD-RWD.webp?v=1785338688","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775536470,"title":"Almont Mercedes-Benz Sprinter W906 and W907 2WD-RWD 93L Long Range Fuel Tank Skid Plate","handle":"almont-sprinter-2-w906-2wd-rwd-fuel-tank-93l-long-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-93l-long-range-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eVans ordered with the 93-litre long-range tank are the ones planning big distances, and big distances mean fuel stops replaced by rough laybys, gravel aires and field pitches. This Almont plate shields the factory 93L long-range tank on the rear-drive Mercedes-Benz Sprinter 2 W906 and Sprinter 3 W907 with certified EN AW-5083 H111 duralumin, 6mm SportDuty grade, at 13.3 kg. Strikes and scrapes land on replaceable plate instead of the tank that is carrying your whole range. Steel brackets, pre-installed bolts and a certificate and instruction manual are included.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLong-range W906 and W907 tourers covering remote miles between fills\u003c\/li\u003e\n\u003cli\u003eRear-drive camper builds specced with the factory 93L tank\u003c\/li\u003e\n\u003cli\u003eFleets that fuel weekly and work on rough ground daily\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2 W906 and Sprinter 3 W907, 2WD-RWD\u003c\/li\u003e\n\u003cli\u003eCoverage: factory 93L long-range fuel tank\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 13.3 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS23DR6L\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFor the factory 93L tank; vans with the standard 72L tank need the standard-range plate\u003c\/li\u003e\n\u003cli\u003eNot for aftermarket enlarged tanks, which Almont excludes across the range\u003c\/li\u003e\n\u003cli\u003e2WD rear-drive only; all-wheel-drive Sprinters use a different plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStandard tank instead? Take the \u003ca href=\"\/products\/almont-sprinter-2-w906-2wd-rwd-fuel-tank-72l-standard-range-skid-plate-sprinter-3-w907-2wd-rwd-fuel-tank-72l-standard-range-skid-plate\"\u003e72L standard-range plate\u003c\/a\u003e. For the front end, see the \u003ca href=\"\/products\/almont-sprinter-3-w907-2wd-rwd-front-skid-plate\"\u003eW907 2WD front skid plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS23DR6L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter 2 W906 and Sprinter 3 W907, 2WD-RWD, 93L long-range tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this the plate for the factory long-range tank only?\u003c\/h3\u003e\u003cp\u003eYes. It is shaped for the 93L factory tank on 2WD W906 and W907 vans. Aftermarket oversize tanks cannot be plated, and the 72L tank takes the standard-range part.\u003c\/p\u003e\u003ch3\u003eDoes generation matter between W906 and W907?\u003c\/h3\u003e\u003cp\u003eNot for this part; both generations in rear-drive form with the 93L tank share it.\u003c\/p\u003e\u003ch3\u003eWhat tools does fitting take?\u003c\/h3\u003e\u003cp\u003eTypically 17mm and 13mm sockets plus 5mm and 6mm Allen keys, using the van's original holes and the supplied steel brackets. Fitting instructions are included; if unsure, use a professional fitter.\u003c\/p\u003e","published_at":"2026-07-30T22:28:32+01:00","created_at":"2026-07-29T16:24:47+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179365206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS23DR6L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"550.62","grams":13300,"compare_at_price":null,"position":1,"product_id":11149775536470,"created_at":"2026-07-29T16:24:47+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223349625174,"created_at":"2026-07-29T16:24:47+01:00","position":1,"updated_at":"2026-07-29T16:24:49+01:00","product_id":11149775536470,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS23DL6-Diposit-93L-Mercedes-Sprinter-W906-2WD-RWD.webp?v=1785338689","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775667542,"title":"Almont Mercedes-Benz Sprinter W906 CDI 4x4 and W907 4x4 Gearbox and Transfer Skid Plate","handle":"almont-sprinter-2-w906-cdi-4x4-gearbox-and-transfer-skid-plate-sprinter-3-w907-4x4-manual-automatic-gearbox-transferskid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eUnder the middle of a 4x4 Sprinter sit the gearbox and transfer case, the two assemblies that make it a 4x4 at all, hanging where rock steps and rut crowns strike. This Almont plate covers that driveline on the Mercedes-Benz Sprinter 2 W906 CDI 4x4 and Sprinter 3 W907 4x4, manual or automatic, in certified EN AW-5083 H111 duralumin with a 6mm SportDuty or 8mm HeavyDuty choice. Contact lands on replaceable plate, not on castings and sumps that end trips. Steel brackets, pre-installed bolts and a certificate and instruction manual come in the kit.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eW906 and W907 4x4 campers crossing rocky and rutted terrain\u003c\/li\u003e\n\u003cli\u003eManual and automatic drivelines alike\u003c\/li\u003e\n\u003cli\u003eHeavy expedition builds choosing 8mm per Almont's duty guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Sprinter 2 W906 CDI 4x4; Sprinter 3 W907 4x4, manual or automatic\u003c\/li\u003e\n\u003cli\u003eCoverage: gearbox and transfer case\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm your van is the W906 CDI 4x4 or W907 4x4; the VS30 4Matic takes its own plate\u003c\/li\u003e\n\u003cli\u003eAlmont suggests 6mm for lighter use, 8mm for heavy vans on sustained overland routes\u003c\/li\u003e\n\u003cli\u003eRaised suspension is fine; modified transmission mounts or chassis are not\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePair it with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate\"\u003e4x4 fuel tank plate\u003c\/a\u003e, or start at the nose with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-front-skid-plate\"\u003eW906 CDI 4x4 front plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer case skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS23B6 (6mm); PDMBS23B8 (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter W906 CDI 4x4 and W907 4x4, manual or automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes gearbox type change the part?\u003c\/h3\u003e\u003cp\u003eNo. Manual and automatic W906 and W907 4x4 vans share this plate; just choose your thickness.\u003c\/p\u003e\u003ch3\u003eWhich thickness suits a loaded camper?\u003c\/h3\u003e\u003cp\u003eAlmont's guidance points heavy vehicles and continental overland use to 8mm, with 6mm for lighter duty. A fully converted 4x4 Sprinter usually justifies the 8mm.\u003c\/p\u003e\u003ch3\u003eIs the VS30 4Matic covered?\u003c\/h3\u003e\u003cp\u003eNo. The VS30 4Matic has its own gearbox and transfer plate, listed separately.\u003c\/p\u003e","published_at":"2026-07-30T22:28:38+01:00","created_at":"2026-07-29T16:24:51+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179627350,"title":"PDMBS23B6","option1":"PDMBS23B6","option2":null,"option3":null,"sku":"PDMBS23B6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"396.90","grams":10000,"compare_at_price":null,"position":1,"product_id":11149775667542,"created_at":"2026-07-29T16:24:51+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179660118,"title":"PDMBS23B8","option1":"PDMBS23B8","option2":null,"option3":null,"sku":"PDMBS23B8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"522.90","grams":12000,"compare_at_price":null,"position":2,"product_id":11149775667542,"created_at":"2026-07-29T16:24:51+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350247766,"created_at":"2026-07-29T16:24:51+01:00","position":1,"updated_at":"2026-07-29T16:24:54+01:00","product_id":11149775667542,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS32B8.jpg?v=1785338694","width":1080,"height":1080}],"options":[{"name":"Configuration","position":1,"values":["PDMBS23B6","PDMBS23B8"]}]},{"id":11149775634774,"title":"Almont Mercedes-Benz Sprinter W906 CDI 4x4, W907 4x4 and W907 VS30 4Matic Fuel Tank Skid Plate","handle":"almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eEvery all-wheel-drive Sprinter generation carries its diesel in a low plastic tank, and every overland route eventually runs something hard underneath it. This Almont fuel tank plate covers three generations in one part: the Mercedes-Benz Sprinter 2 W906 CDI 4x4, the Sprinter 3 W907 4x4 and the Sprinter W907 VS30 4Matic. It is certified EN AW-5083 H111 duralumin in 6mm SportDuty grade, weighs 14 kg and bolts to the original chassis holes with the supplied steel brackets and pre-installed bolts, so rock crests and drag contact spend themselves on the plate rather than the tank.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4x4 and 4Matic Sprinter campers touring remote tracks\u003c\/li\u003e\n\u003cli\u003eBuilds pairing tank cover with the gearbox and rear diff plates\u003c\/li\u003e\n\u003cli\u003eOwners keeping one part number across a mixed W906\/W907 fleet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Sprinter 2 W906 CDI 4x4; Sprinter 3 W907 4x4; Sprinter W907 VS30 4Matic\u003c\/li\u003e\n\u003cli\u003eCoverage: fuel tank\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 14 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS23D6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFor all-wheel-drive models; 2WD rear-drive vans take the separate 72L or 93L plates\u003c\/li\u003e\n\u003cli\u003eFits the original tank only, not aftermarket long-range replacements\u003c\/li\u003e\n\u003cli\u003ePlan the annual bolt check and pressure wash into the van's service habits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-gearbox-and-transfer-skid-plate-sprinter-3-w907-4x4-manual-automatic-gearbox-transferskid-plate\"\u003e4x4 gearbox and transfer plate\u003c\/a\u003e and the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-rear-differential-sprinter-3-w907-4x4-rear-differential-engine-2-2-3-0-2-0matic-sprinter-w907-vs30-4matic-rear-differential-engine-2-2-3-0-2-0matic\"\u003erear differential plate\u003c\/a\u003e to cover the driveline behind it.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS23D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter W906 CDI 4x4, W907 4x4, W907 VS30 4Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich Sprinter drivelines does it cover?\u003c\/h3\u003e\u003cp\u003eThe W906 CDI 4x4, the W907 4x4 and the newer W907 VS30 4Matic all share this plate. Rear-drive 2WD vans use different parts split by tank size.\u003c\/p\u003e\u003ch3\u003eWill it fit if I have fitted a bigger tank?\u003c\/h3\u003e\u003cp\u003eNo. Almont's tank plates fit the original tank only; a larger replacement tank rules the plate out.\u003c\/p\u003e\u003ch3\u003eDo I have to fit other plates first?\u003c\/h3\u003e\u003cp\u003eNo prerequisite is published for this tank plate, so it can be your first piece of underbody cover.\u003c\/p\u003e","published_at":"2026-07-30T22:28:36+01:00","created_at":"2026-07-29T16:24:50+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179594582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS23D6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"550.62","grams":13500,"compare_at_price":null,"position":1,"product_id":11149775634774,"created_at":"2026-07-29T16:24:50+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223349789014,"created_at":"2026-07-29T16:24:50+01:00","position":1,"updated_at":"2026-07-29T16:24:52+01:00","product_id":11149775634774,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS23D6.jpg?v=1785338692","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775700310,"title":"Almont Mercedes-Benz Sprinter W906 CDI 4x4, W907 4x4 and W907 VS30 4Matic Rear Differential Skid Plate","handle":"almont-sprinter-2-w906-cdi-4x4-rear-differential-sprinter-3-w907-4x4-rear-differential-engine-2-2-3-0-2-0matic-sprinter-w907-vs30-4matic-rear-differential-engine-2-2-3-0-2-0matic","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe rear differential is the lowest hard point on an all-wheel-drive Sprinter's back axle, and it trails through every rut, rock crest and ford the route serves up. This Almont plate shields that housing across the Mercedes-Benz Sprinter 2 W906 CDI 4x4, Sprinter 3 W907 4x4 and Sprinter W907 VS30 4Matic, covering the 2.2, 3.0 and 2.0Matic engine versions on the later vans. Cut from certified EN AW-5083 H111 duralumin in your choice of 6mm SportDuty or 8mm HeavyDuty, it puts sacrificial metal between trail and diff so a strike means a scuffed plate, not gear oil on the ground.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4x4 and 4Matic Sprinter campers running rutted and rocky routes\u003c\/li\u003e\n\u003cli\u003eCompleting driveline cover behind the gearbox and tank plates\u003c\/li\u003e\n\u003cli\u003eHeavier builds selecting 8mm per Almont's duty guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Sprinter W906 CDI 4x4; W907 4x4; W907 VS30 4Matic (2.2, 3.0, 2.0Matic engines)\u003c\/li\u003e\n\u003cli\u003eCoverage: rear differential housing\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMatch your van's generation and engine to the application list before ordering\u003c\/li\u003e\n\u003cli\u003eNot compatible with modified axles, suspension links or a diff-drop arrangement\u003c\/li\u003e\n\u003cli\u003eCheck bolt tightness annually, especially after heavy corrugation miles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCover the exposed shock mounts nearby with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-rear-shock-absorber-skid-plate-steel-4mm-sprinter-3-w907-4x4-rear-shock-absorber-skid-plate-steel-4mm-sprinter-w907-vs30-4matic-rear-shock-absorber-s\"\u003e4mm steel rear shock plates\u003c\/a\u003e, or see the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate\"\u003e4x4 fuel tank plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear differential skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS23DIF6 (6mm); PDMBS23DIF8 (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter W906 CDI 4x4, W907 4x4, W907 VS30 4Matic; 2.2, 3.0, 2.0Matic engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes it cover all three Sprinter 4x4 generations?\u003c\/h3\u003e\u003cp\u003eYes: W906 CDI 4x4, W907 4x4 and the VS30 4Matic, with the 2.2, 3.0 and 2.0Matic engines named for the W907-based vans.\u003c\/p\u003e\u003ch3\u003e6mm or 8mm at the diff?\u003c\/h3\u003e\u003cp\u003eAlmont's rule of thumb is 6mm for lighter use and 8mm for heavy vans and continental overland work. If the van is a loaded camper doing rocky miles, take the 8mm.\u003c\/p\u003e\u003ch3\u003eDoes it need welding?\u003c\/h3\u003e\u003cp\u003eNo welding step is published for this plate; it mounts with the supplied steel brackets and bolts.\u003c\/p\u003e","published_at":"2026-07-30T22:28:40+01:00","created_at":"2026-07-29T16:24:52+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179692886,"title":"HeavyDuty 8mm","option1":"HeavyDuty 8mm","option2":null,"option3":null,"sku":"PDMBS23DIF8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"390.60","grams":8000,"compare_at_price":null,"position":1,"product_id":11149775700310,"created_at":"2026-07-29T16:24:52+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838179725654,"title":"SportDuty 6mm","option1":"SportDuty 6mm","option2":null,"option3":null,"sku":"PDMBS23DIF6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"315.00","grams":6000,"compare_at_price":null,"position":2,"product_id":11149775700310,"created_at":"2026-07-29T16:24:52+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350280534,"created_at":"2026-07-29T16:24:52+01:00","position":1,"updated_at":"2026-07-29T16:24:55+01:00","product_id":11149775700310,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS23DIF6.jpg?v=1785338695","width":1080,"height":1080}],"options":[{"name":"Duty","position":1,"values":["HeavyDuty 8mm","SportDuty 6mm"]}]},{"id":11149775733078,"title":"Almont Mercedes-Benz Sprinter W906 CDI 4x4, W907 4x4 and W907 VS30 4Matic Rear Shock Absorber Skid Plate 4mm Steel","handle":"almont-sprinter-2-w906-cdi-4x4-rear-shock-absorber-skid-plate-steel-4mm-sprinter-3-w907-4x4-rear-shock-absorber-skid-plate-steel-4mm-sprinter-w907-vs30-4matic-rear-shock-absorber-s","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe lower rear shock mounts on an all-wheel-drive Sprinter sit right out at axle level, where rocks, ruts and trail debris clip them long before anything else is in danger. Bend or shear a damper mount two days into a trip and the van limps home on a cratered ride. This Almont plate set shields those rear shock absorber mounts on the Mercedes-Benz Sprinter 2 W906 CDI 4x4, Sprinter 3 W907 4x4 and Sprinter W907 VS30 4Matic. Unlike the duralumin plates in the range, these are made from 4mm steel, weigh 4 kg and mount with the supplied hardware.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4x4 and 4Matic Sprinters that run rocky, rutted or washed-out tracks\u003c\/li\u003e\n\u003cli\u003eExpedition vans protecting suspension hard points before remote routes\u003c\/li\u003e\n\u003cli\u003eFinishing a rear-axle setup alongside the diff plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Sprinter W906 CDI 4x4; W907 4x4; W907 VS30 4Matic\u003c\/li\u003e\n\u003cli\u003eCoverage: rear shock absorber lower mounts\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm steel\u003c\/li\u003e\n\u003cli\u003eWeight: 4 kg\u003c\/li\u003e\n\u003cli\u003eSKU: PDMBS23AS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne part covers the three all-wheel-drive generations; check your driveline first\u003c\/li\u003e\n\u003cli\u003eNot for vans with modified suspension links or relocated shock mounts\u003c\/li\u003e\n\u003cli\u003eSteel wants the same yearly pressure wash and bolt check as the rest of the setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGuard the neighbouring housing with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-rear-differential-sprinter-3-w907-4x4-rear-differential-engine-2-2-3-0-2-0matic-sprinter-w907-vs30-4matic-rear-differential-engine-2-2-3-0-2-0matic\"\u003eSprinter 4x4 rear differential plate\u003c\/a\u003e, or cover the tank with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate\"\u003e4x4 fuel tank plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear shock absorber skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDMBS23AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eSprinter W906 CDI 4x4, W907 4x4, W907 VS30 4Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy is this one steel when the big plates are duralumin?\u003c\/h3\u003e\u003cp\u003eAlmont builds this particular guard in 4mm steel rather than the AW-5083 duralumin used for its main plates. You get a compact, tough cover shaped for the shock mounts at only 4 kg.\u003c\/p\u003e\u003ch3\u003eDoes it fit all three Sprinter 4x4 generations?\u003c\/h3\u003e\u003cp\u003eYes. W906 CDI 4x4, W907 4x4 and the VS30 4Matic share the same part.\u003c\/p\u003e\u003ch3\u003eWill it work with upgraded dampers?\u003c\/h3\u003e\u003cp\u003eIt protects the standard mount locations. If your van runs relocated or modified shock mounts, the plates will not line up, so check with us first.\u003c\/p\u003e","published_at":"2026-07-30T22:28:41+01:00","created_at":"2026-07-29T16:24:54+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838179758422,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDMBS23AS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"157.50","grams":4000,"compare_at_price":null,"position":1,"product_id":11149775733078,"created_at":"2026-07-29T16:24:54+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350542678,"created_at":"2026-07-29T16:24:54+01:00","position":1,"updated_at":"2026-07-29T16:24:56+01:00","product_id":11149775733078,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS32AS.webp?v=1785338696","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775864150,"title":"Almont Mercedes-Benz Sprinter W907 and VS30 4Matic Recovery Point Kit","handle":"almont-sprinter-3-w907-4x4-winch-support-thyssenkrupp-f105-f105-6mm-wbmb967-1-9-0kgr-sprinter-3-w907-4x4-kit-recovery-point-thyssenkrupp-f105-f105-6mm-sprinter-w907-vs30-winch-supp","body_html":"\u003cp\u003eRecovery point kit for Mercedes-Benz Sprinter W907 4x4 models from July 2019 to September 2022 and W907 VS30 4Matic models from October 2022 onwards.\u003c\/p\u003e\u003cp\u003eMade from 8 mm ThyssenKrupp F105 steel. Maximum linear pull is 1,800 kg per point or 3,600 kg across both points. Use for frontal linear pulls only, never diagonal or lateral pulls.\u003c\/p\u003e","published_at":"2026-07-30T22:28:48+01:00","created_at":"2026-07-29T16:24:58+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Recovery Accessory","tags":["ALMONT4WD","brand:almont4wd","cat:recovery","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:recovery-accessory"],"variants":[{"id":54838179987798,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RPMBS907","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"138.60","grams":4000,"compare_at_price":null,"position":1,"product_id":11149775864150,"created_at":"2026-07-29T16:24:59+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350772054,"created_at":"2026-07-29T16:24:59+01:00","position":1,"updated_at":"2026-07-29T16:25:01+01:00","product_id":11149775864150,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/RPMBS907-kit-recovery-point-w907-vs30.webp?v=1785338701","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11156045660502,"title":"Almont Mercedes-Benz Sprinter W907 and VS30 4Matic Winch Support","handle":"almont-mercedes-benz-sprinter-w907-vs30-winch-support","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA winch turns a heavy 4x4 Sprinter from the van that waits for recovery into the van that recovers itself, but only if it has somewhere structural to mount. This Almont winch support for the Mercedes-Benz Sprinter W907 and W907 VS30 4Matic is fabricated from 6mm ThyssenKrupp F105 steel, the same steel family Almont uses for its Sprinter recovery hardware, and gives the winch a mounting platform tied into the van's front structure. Almont recommends having its original-bumper front skid plate installed alongside, so the nose carries protection and recovery kit as one system.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eW907 and VS30 4Matic expedition vans winching themselves off soft ground\u003c\/li\u003e\n\u003cli\u003eRemote tourers who cannot rely on another vehicle for recovery\u003c\/li\u003e\n\u003cli\u003eBuilds combining the front plate, recovery points and a winch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter W907 and W907 VS30 4Matic\u003c\/li\u003e\n\u003cli\u003ePurpose: winch mounting support\u003c\/li\u003e\n\u003cli\u003eMaterial: 6mm ThyssenKrupp F105 steel\u003c\/li\u003e\n\u003cli\u003eSKU: WBMB967\u003c\/li\u003e\n\u003cli\u003eRecommended alongside: Almont original-bumper front skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFit or plan the matching front skid plate; Almont names it as the recommended companion\u003c\/li\u003e\n\u003cli\u003eChoose your winch and confirm its dimensions and mounting pattern with us before ordering\u003c\/li\u003e\n\u003cli\u003eHave the electrical installation done to the winch maker's specification\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePair it with the \u003ca href=\"\/products\/almont-sprinter-3-w907-4x4-front-skid-plate\"\u003eW907 4x4 front skid plate\u003c\/a\u003e or \u003ca href=\"\/products\/almont-sprinter-w907-vs30-4matic-front-skid-plate\"\u003eVS30 4Matic front skid plate\u003c\/a\u003e, and add the recovery point kit for strap work.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWinch support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWBMB967\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter W907 and W907 VS30 4Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eThyssenKrupp F105 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs a winch included?\u003c\/h3\u003e\u003cp\u003eNo. This is the steel mounting support; the winch itself, its wiring and its fitting are separate. Tell us your winch model and we will check the pairing.\u003c\/p\u003e\u003ch3\u003eHow is this different from the recovery point kit?\u003c\/h3\u003e\u003cp\u003eThe recovery points are rated attachment eyes for strap pulls; this support carries a winch. Serious builds often run both.\u003c\/p\u003e\u003ch3\u003eDo I need the front skid plate first?\u003c\/h3\u003e\u003cp\u003eAlmont recommends the original-bumper front plate installed alongside rather than making it mandatory, and the two are designed to live together.\u003c\/p\u003e","published_at":"2026-07-31T00:04:27+01:00","created_at":"2026-07-31T00:02:34+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Recovery Accessory","tags":["ALMONT4WD","brand:almont4wd","cat:recovery","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:recovery-accessory"],"variants":[{"id":54851985441110,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WBMB967","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"781.20","grams":19000,"compare_at_price":null,"position":1,"product_id":11156045660502,"created_at":"2026-07-31T00:02:34+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83243621974358,"created_at":"2026-07-31T00:02:35+01:00","position":1,"updated_at":"2026-07-31T00:02:37+01:00","product_id":11156045660502,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBSSWINCH-Mercedes-W907-W907-VS30.webp?v=1785452557","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149775896918,"title":"Almont Mercedes-Benz Sprinter W907 VS30 4Matic Front Skid Plate","handle":"almont-sprinter-w907-vs30-4matic-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe VS30 4Matic is the newest all-wheel-drive Sprinter, and new vans get taken to the same old places: rock-strewn access tracks, rutted farm lanes and steep loose pitches that reach up for the front underside. This Almont front skid plate for the Mercedes-Benz Sprinter W907 VS30 4Matic hangs certified EN AW-5083 H111 duralumin under the nose in your pick of 6mm SportDuty or 8mm HeavyDuty, with versions for the original bumper and for a Van Compass bumper. Impacts spend themselves on the plate, which is exactly what it is for, and Almont warrants it against cracking for 3 years.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVS30 4Matic adventure vans built for touring and winter routes\u003c\/li\u003e\n\u003cli\u003eVans converted with a Van Compass front end needing the VC version\u003c\/li\u003e\n\u003cli\u003eLoaded builds choosing 8mm per Almont's heavy-vehicle guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter W907 VS30 4Matic\u003c\/li\u003e\n\u003cli\u003eBumper versions: original bumper, or Van Compass bumper (VC variants)\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe VS30 4Matic arrived in late 2022; earlier W907 4x4 vans take the other front plate, so check which you have\u003c\/li\u003e\n\u003cli\u003eChoose the VC variant only with a Van Compass bumper fitted\u003c\/li\u003e\n\u003cli\u003eWinch-compatible before or after fitting; body-lifts and chassis mods are excluded\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd the \u003ca href=\"\/products\/almont-sprinter-w907-vs30-4matic-gearbox-and-transfer-skid-plate\"\u003eVS30 4Matic gearbox and transfer plate\u003c\/a\u003e behind it, and rated recovery points for soft-ground trips.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS3A26 \/ PDMBS3A26VC (6mm); PDMBS3A28 \/ PDMBS3A28VC (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter W907 VS30 4Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow do I know my van is a VS30 4Matic rather than a W907 4x4?\u003c\/h3\u003e\u003cp\u003eThe VS30 4Matic replaced the W907 4x4 from around October 2022. Check your build date or send us the registration and we will confirm which front plate fits.\u003c\/p\u003e\u003ch3\u003eDo I need the Van Compass version?\u003c\/h3\u003e\u003cp\u003eOnly if a Van Compass bumper is fitted. On the standard front end, order the standard variant in your chosen thickness.\u003c\/p\u003e","published_at":"2026-07-30T22:28:50+01:00","created_at":"2026-07-29T16:25:00+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838180020566,"title":"PDMBS3A26","option1":"PDMBS3A26","option2":null,"option3":null,"sku":"PDMBS3A26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"767.34","grams":24000,"compare_at_price":null,"position":1,"product_id":11149775896918,"created_at":"2026-07-29T16:25:00+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838180053334,"title":"PDMBS3A26VC","option1":"PDMBS3A26VC","option2":null,"option3":null,"sku":"PDMBS3A26VC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"767.34","grams":24000,"compare_at_price":null,"position":2,"product_id":11149775896918,"created_at":"2026-07-29T16:25:00+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838180086102,"title":"PDMBS3A28","option1":"PDMBS3A28","option2":null,"option3":null,"sku":"PDMBS3A28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"945.00","grams":25000,"compare_at_price":null,"position":3,"product_id":11149775896918,"created_at":"2026-07-29T16:25:00+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838180118870,"title":"PDMBS3A28VC","option1":"PDMBS3A28VC","option2":null,"option3":null,"sku":"PDMBS3A28VC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"945.00","grams":25000,"compare_at_price":null,"position":4,"product_id":11149775896918,"created_at":"2026-07-29T16:25:00+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223350837590,"created_at":"2026-07-29T16:25:00+01:00","position":1,"updated_at":"2026-07-29T16:25:02+01:00","product_id":11149775896918,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS3A26.jpg?v=1785338702","width":1080,"height":1080}],"options":[{"name":"Front Type","position":1,"values":["PDMBS3A26","PDMBS3A26VC","PDMBS3A28","PDMBS3A28VC"]}]},{"id":11149776159062,"title":"Almont Mercedes-Benz Sprinter W907 VS30 4Matic Gearbox and Transfer Skid Plate","handle":"almont-sprinter-w907-vs30-4matic-gearbox-and-transfer-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe 4Matic hardware that gets a VS30 Sprinter across rough ground hangs in the middle of the van, where rock crowns and rut edges strike hardest. This Almont plate covers the gearbox and transfer case on the Mercedes-Benz Sprinter W907 VS30 4Matic with certified EN AW-5083 H111 duralumin in a 6mm SportDuty or 8mm HeavyDuty choice. A strike becomes a scuff on replaceable plate rather than a cracked casing and a recovery flatbed. Steel mounting brackets, pre-installed bolts and a certificate and instruction manual are supplied, and the plate carries a 3-year warranty against cracking.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVS30 4Matic expedition vans crossing rocky and rutted terrain\u003c\/li\u003e\n\u003cli\u003eOwners pairing centre cover with the front plate for a continuous run\u003c\/li\u003e\n\u003cli\u003eHeavier conversions taking 8mm per Almont's duty guidance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter W907 VS30 4Matic\u003c\/li\u003e\n\u003cli\u003eCoverage: gearbox and transfer case\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin\u003c\/li\u003e\n\u003cli\u003eThickness options: 6mm SportDuty or 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eIncluded: steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVS30 4Matic only; the earlier W906 and W907 4x4 vans use the other gearbox plate\u003c\/li\u003e\n\u003cli\u003eNot compatible with modified transmission mounts or a body-lift\u003c\/li\u003e\n\u003cli\u003eBudget a yearly bolt check and pressure wash, more often in salt and mud\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStart the run with the \u003ca href=\"\/products\/almont-sprinter-w907-vs30-4matic-front-skid-plate\"\u003eVS30 4Matic front skid plate\u003c\/a\u003e and close it with the \u003ca href=\"\/products\/almont-sprinter-2-w906-cdi-4x4-fuel-tank-skid-plate-sprinter-3-w907-4x4-fuel-tank-skid-plate-sprinter-w907-vs30-4matic-fuel-tank-skid-plate\"\u003e4x4\/4Matic fuel tank plate\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD (Spain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer case skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant SKUs\u003c\/td\u003e\n\u003ctd\u003ePDMBS3B26 (6mm); PDMBS3B28 (8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter W907 VS30 4Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6 mm (SportDuty) or 8 mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill it fit my 2020 W907 4x4?\u003c\/h3\u003e\u003cp\u003eNo. Pre-VS30 W906 and W907 4x4 Sprinters share a different gearbox and transfer plate. This one is shaped for the VS30 4Matic driveline.\u003c\/p\u003e\u003ch3\u003eWhich thickness should a heavy camper take?\u003c\/h3\u003e\u003cp\u003eAlmont steers heavy vehicles and long overland use to 8mm, and lighter mixed use to 6mm. Most built-out 4Matic vans sit in 8mm territory.\u003c\/p\u003e","published_at":"2026-07-30T22:28:53+01:00","created_at":"2026-07-29T16:25:01+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:mercedes-benz-sprinter","make:mercedes-benz","type:skid-plate"],"variants":[{"id":54838180446550,"title":"PDMBS3B26","option1":"PDMBS3B26","option2":null,"option3":null,"sku":"PDMBS3B26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"422.10","grams":10000,"compare_at_price":null,"position":1,"product_id":11149776159062,"created_at":"2026-07-29T16:25:01+01:00","updated_at":"2026-08-16T14:14:42+01:00"},{"id":54838180479318,"title":"PDMBS3B28","option1":"PDMBS3B28","option2":null,"option3":null,"sku":"PDMBS3B28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"564.48","grams":12000,"compare_at_price":null,"position":2,"product_id":11149776159062,"created_at":"2026-07-29T16:25:01+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83223351132502,"created_at":"2026-07-29T16:25:01+01:00","position":1,"updated_at":"2026-07-29T16:25:04+01:00","product_id":11149776159062,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDMBS3B.jpg?v=1785338704","width":1080,"height":1080}],"options":[{"name":"Configuration","position":1,"values":["PDMBS3B26","PDMBS3B28"]}]},{"id":11146190258518,"title":"ARB Mercedes-Benz Sprinter L1 \/ L2 \/ L3 LWB 2006 Onwards BASE Rack Cab Mount Kit 2995mm x 1445mm","handle":"arb-base-rack-2995mm-x-1445mm-cab-mount-kit-mercedes-sprinter-2006-onwards-l1-l2-l3-lwb-models-only","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eARB Mercedes-Benz Sprinter L1 \/ L2 \/ L3 LWB 2006 Onwards BASE Rack Cab Mount Kit 2995mm x 1445mm. Listed fitment (ARB): Mercedes Sprinter Mk3 (2006 - 2013) Mercedes Sprinter Mk4 (2013 - 2018) Mercedes Sprinter Mk5 (2018 Onwards) VW Crafter Mk1 (2006 - 2011) VW Crafter Mk2 (2012 - 2017). Confirm the exact year, body style and cab against your vehicle before ordering.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTouring or work vehicles refining how equipment is carried.\u003c\/li\u003e\n\u003cli\u003eReplacing a missing rack component with the correct product code.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlanning The Rack Layout\u003c\/h2\u003e\u003cp\u003eDecide where the accessory will sit before loading the vehicle. Allow room for neighbouring mounts, opening doors, awnings, rooftop tents and the path used to load longer items. The rack, roof and vehicle load limits still govern the finished setup even when the accessory itself is small.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: ARB\u003c\/li\u003e\n\u003cli\u003eProduct type: rack mounting accessory\u003c\/li\u003e\n\u003cli\u003eSKU: XRRJ1770140MESP3K\u003c\/li\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2006 Onwards\u003c\/li\u003e\n\u003cli\u003eVariant fitment: LWB Models Only L1, L2, L3\u003c\/li\u003e\n\u003cli\u003elisted size or rating: 2995mm x 1445mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eMatch the rack family, dimensions and mounting interface shown in the product title. Check the vehicle roof-load limit, the rack limit and any dynamic or off-road reductions before adding cargo. Related rack, fasteners or load carriers are separate unless listed as included.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eARB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003erack mounting accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eXRRJ1770140MESP3K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Application\u003c\/th\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 2006 Onwards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Fitment\u003c\/th\u003e\n\u003ctd\u003eLWB Models Only L1, L2, L3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePublished Size or Rating\u003c\/th\u003e\n\u003ctd\u003e2995mm x 1445mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied As\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this attach to every ARB rack?\u003c\/h3\u003e\u003cp\u003eCheck the exact rack family, size and mounting interface. BASE Rack, traditional rack and canopy systems use different components.\u003c\/p\u003e\u003ch3\u003eDoes the accessory increase the vehicle roof-load limit?\u003c\/h3\u003e\u003cp\u003eNo. The vehicle and rack limits remain the controlling figures for the complete load.\u003c\/p\u003e\u003ch3\u003eAre the rack and carried equipment included?\u003c\/h3\u003e\u003cp\u003eOnly the item shown in the title is covered. Plan the rack, cargo mounts and any extra fasteners separately.\u003c\/p\u003e","published_at":"2026-07-31T00:28:48+01:00","created_at":"2026-07-26T22:23:32+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ARB","product_type":"Rack Accessory","tags":["ARB","ARB Base Rack","brand:arb","cat:roof-racks","dept:vehicle-accessories","fits:mercedes-benz-sprinter","fits:volkswagen-crafter","make:mercedes-benz","make:volkswagen","Mercedes-Benz","Mercedes-Benz Sprinter","Rack Accessory","type:rack-accessory","Volkswagen","Volkswagen Crafter"],"variants":[{"id":54818891137366,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XRRJ1770140MESP3K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1872.95","grams":0,"compare_at_price":null,"position":1,"product_id":11146190258518,"created_at":"2026-07-26T22:23:32+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83163140882774,"created_at":"2026-07-26T22:23:32+01:00","position":1,"updated_at":"2026-07-26T22:23:36+01:00","product_id":11146190258518,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/rack_merc.png?v=1785101016","width":1200,"height":1200},{"id":83163140915542,"created_at":"2026-07-26T22:23:32+01:00","position":2,"updated_at":"2026-07-26T22:23:34+01:00","product_id":11146190258518,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/hqdefault_50_5.jpg?v=1785101014","width":480,"height":360}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11146190389590,"title":"ARB Mercedes-Benz Sprinter SWB \/ MWB 2006 Onwards BASE Rack Cab Mount Kit 1545mm x 1445mm","handle":"arb-base-rack-1545mm-x-1445mm-cab-mount-kit-mercedes-sprinter-2006-onwards-swb-mwb-models","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eARB Mercedes-Benz Sprinter SWB \/ MWB 2006 Onwards BASE Rack Cab Mount Kit 1545mm x 1445mm. Listed fitment (ARB): Mercedes Sprinter Mk3 (2006 - 2013) Mercedes Sprinter Mk4 (2013 - 2018) Mercedes Sprinter Mk5 (2018 Onwards) VW Crafter Mk1 (2006 - 2011) VW Crafter Mk2 (2012 - 2017). Confirm the exact year, body style and cab against your vehicle before ordering.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTouring or work vehicles refining how equipment is carried.\u003c\/li\u003e\n\u003cli\u003eReplacing a missing rack component with the correct product code.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlanning The Rack Layout\u003c\/h2\u003e\u003cp\u003eDecide where the accessory will sit before loading the vehicle. Allow room for neighbouring mounts, opening doors, awnings, rooftop tents and the path used to load longer items. The rack, roof and vehicle load limits still govern the finished setup even when the accessory itself is small.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: ARB\u003c\/li\u003e\n\u003cli\u003eProduct type: rack mounting accessory\u003c\/li\u003e\n\u003cli\u003eSKU: XRRJ1770080MESP3K\u003c\/li\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2006 Onwards\u003c\/li\u003e\n\u003cli\u003eVariant fitment: SWB MWB\u003c\/li\u003e\n\u003cli\u003elisted size or rating: 1545mm x 1445mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eMatch the rack family, dimensions and mounting interface shown in the product title. Check the vehicle roof-load limit, the rack limit and any dynamic or off-road reductions before adding cargo. Related rack, fasteners or load carriers are separate unless listed as included.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eARB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003erack mounting accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eXRRJ1770080MESP3K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Application\u003c\/th\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 2006 Onwards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Fitment\u003c\/th\u003e\n\u003ctd\u003eSWB MWB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePublished Size or Rating\u003c\/th\u003e\n\u003ctd\u003e1545mm x 1445mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied As\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this attach to every ARB rack?\u003c\/h3\u003e\u003cp\u003eCheck the exact rack family, size and mounting interface. BASE Rack, traditional rack and canopy systems use different components.\u003c\/p\u003e\u003ch3\u003eDoes the accessory increase the vehicle roof-load limit?\u003c\/h3\u003e\u003cp\u003eNo. The vehicle and rack limits remain the controlling figures for the complete load.\u003c\/p\u003e\u003ch3\u003eAre the rack and carried equipment included?\u003c\/h3\u003e\u003cp\u003eOnly the item shown in the title is covered. Plan the rack, cargo mounts and any extra fasteners separately.\u003c\/p\u003e","published_at":"2026-07-31T00:28:37+01:00","created_at":"2026-07-26T22:23:37+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ARB","product_type":"Rack Accessory","tags":["ARB","brand:arb","cat:roof-racks","dept:vehicle-accessories","fits:mercedes-benz-sprinter","fits:volkswagen-crafter","make:mercedes-benz","make:volkswagen","Rack Accessory","type:roof-rack"],"variants":[{"id":54818891268438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XRRJ1770080MESP3K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"1084.73","grams":0,"compare_at_price":null,"position":1,"product_id":11146190389590,"created_at":"2026-07-26T22:23:37+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83163141243222,"created_at":"2026-07-26T22:23:37+01:00","position":1,"updated_at":"2026-07-26T22:23:41+01:00","product_id":11146190389590,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/rack_merc_1.png?v=1785101021","width":1200,"height":1200},{"id":83163141275990,"created_at":"2026-07-26T22:23:37+01:00","position":2,"updated_at":"2026-07-26T22:23:39+01:00","product_id":11146190389590,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/hqdefault_50_6.jpg?v=1785101019","width":480,"height":360}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11146187112790,"title":"ARB Mercedes-Benz Sprinter W906 2WD RWD 2006-2018 BASE Rack Mount Kit 2125 x 1445","handle":"arb-base-rack-mount-kit-2125-x-1445-for-sprinter","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eARB Mercedes-Benz Sprinter W906 2WD RWD 2006-2018 BASE Rack Mount Kit 2125 x 1445. \u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTouring or work vehicles refining how equipment is carried.\u003c\/li\u003e\n\u003cli\u003eReplacing a missing rack component with the correct product code.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlanning The Rack Layout\u003c\/h2\u003e\u003cp\u003eDecide where the accessory will sit before loading the vehicle. Allow room for neighbouring mounts, opening doors, awnings, rooftop tents and the path used to load longer items. The rack, roof and vehicle load limits still govern the finished setup even when the accessory itself is small.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: ARB\u003c\/li\u003e\n\u003cli\u003eProduct type: rack mounting accessory\u003c\/li\u003e\n\u003cli\u003eSKU: XRR17965030\u003c\/li\u003e\n\u003cli\u003eVehicle application: Mercedes-Benz Sprinter 2006-2018\u003c\/li\u003e\n\u003cli\u003eVariant fitment: W906 2WD RWD\u003c\/li\u003e\n\u003cli\u003eSupplied as: \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eMatch the rack family, dimensions and mounting interface shown in the product title. Check the vehicle roof-load limit, the rack limit and any dynamic or off-road reductions before adding cargo. Related rack, fasteners or load carriers are separate unless listed as included.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eARB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003erack mounting accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eXRR17965030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Application\u003c\/th\u003e\n\u003ctd\u003eMercedes-Benz Sprinter 2006-2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Fitment\u003c\/th\u003e\n\u003ctd\u003eW906 2WD RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied As\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this attach to every ARB rack?\u003c\/h3\u003e\u003cp\u003eCheck the exact rack family, size and mounting interface. BASE Rack, traditional rack and canopy systems use different components.\u003c\/p\u003e\u003ch3\u003eDoes the accessory increase the vehicle roof-load limit?\u003c\/h3\u003e\u003cp\u003eNo. The vehicle and rack limits remain the controlling figures for the complete load.\u003c\/p\u003e\u003ch3\u003eAre the rack and carried equipment included?\u003c\/h3\u003e\u003cp\u003eOnly the item shown in the title is covered. Plan the rack, cargo mounts and any extra fasteners separately.\u003c\/p\u003e","published_at":"2026-07-31T00:29:28+01:00","created_at":"2026-07-26T22:21:42+01:00","updated_at":"2026-08-16T14:14:42+01:00","vendor":"ARB","product_type":"Rack Accessory","tags":["ARB","brand:arb","cat:roof-racks","dept:vehicle-accessories","fits:mercedes-benz-sprinter","fits:volkswagen-crafter","make:mercedes-benz","make:volkswagen","Rack Accessory","type:roof-rack"],"variants":[{"id":54818886386006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XRR17965030","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"303.97","grams":0,"compare_at_price":null,"position":1,"product_id":11146187112790,"created_at":"2026-07-26T22:21:42+01:00","updated_at":"2026-08-16T14:14:42+01:00"}],"images":[{"id":83163131674966,"created_at":"2026-07-26T22:21:42+01:00","position":1,"updated_at":"2026-07-26T22:21:44+01:00","product_id":11146187112790,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/image_5b7cde39-7b08-446a-aadb-9425516febdd.jpg?v=1785100904","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]}]}