{"products":[{"id":11149769638230,"title":"Almont Jeep Grand Cherokee WJ\/WG Front Skid Plate","handle":"almont-grand-cherokee-wj-front-skid-plate-grand-cherokee-wg-front-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe WJ Grand Cherokee has become one of the best-value ways into proper off-roading, and owners use them accordingly: hard, and on ground that punishes the front underside. This Almont plate protects the WJ's nose with 12.5 kg of 8mm EN AW-5083 H111 duralumin, one HeavyDuty part covering the WJ and WG codes with all engines. Rocks, stumps and rutted approaches meet plate, and a cheap-to-run Jeep stays cheap to run.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWJs used on lanes, pay-and-play days and rock-strewn tracks\u003c\/li\u003e\n\u003cli\u003eKeeping repair bills proportionate on a value 4x4 that gets worked hard\u003c\/li\u003e\n\u003cli\u003eThe first plate of a WJ underside setup, ahead of the transmission plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWJA8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WJ and WG, all engines\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 12.5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovers both the WJ and WG designations; all engines take the same plate.\u003c\/li\u003e\n\u003cli\u003eMounts to the original chassis holes with the supplied steel brackets and bolts.\u003c\/li\u003e\n\u003cli\u003eRaised suspension is accepted; body lifts and modified links, mounts or chassis are not.\u003c\/li\u003e\n\u003cli\u003eContinue with the \u003ca href=\"\/products\/almont-grand-cherokee-wj-gearbox-and-transfer-skid-plate-grand-cherokee-wg-gearbox-and-transfer-skid-plate\"\u003eWJ\/WG gearbox and transfer plate\u003c\/a\u003e for the centre of the truck.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWJA8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WJ \/ WG, all engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eMy V5 says WG, not WJ. Is it the same plate?\u003c\/h3\u003e\u003cp\u003eYes. Almont lists this single part for both the WJ and WG codes, whatever the engine.\u003c\/p\u003e\u003ch3\u003eHow involved is fitting?\u003c\/h3\u003e\u003cp\u003eThe plate goes into the original chassis holes using the supplied brackets and pre-installed bolts, with instructions in the box. Typical tools are 13mm and 17mm sockets plus 5mm and 6mm Allen keys.\u003c\/p\u003e","published_at":"2026-07-30T22:23:20+01:00","created_at":"2026-07-29T16:21:39+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wg","fits:jeep-grand-cherokee-wj","make:jeep","type:skid-plate"],"variants":[{"id":54838164848982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWJA8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"457.38","grams":16000,"compare_at_price":null,"position":1,"product_id":11149769638230,"created_at":"2026-07-29T16:21:39+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223326654806,"created_at":"2026-07-29T16:21:39+01:00","position":1,"updated_at":"2026-07-29T16:21:44+01:00","product_id":11149769638230,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/Frontal-Jeep-Grand-Cherokee-WJ.webp?v=1785338504","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769703766,"title":"Almont Jeep Grand Cherokee WJ\/WG Gearbox and Transfer Skid Plate","handle":"almont-grand-cherokee-wj-gearbox-and-transfer-skid-plate-grand-cherokee-wg-gearbox-and-transfer-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eUnder the middle of a WJ Grand Cherokee sits the hardware that makes it a Jeep: gearbox and transfer case, hanging where rock crests and deep ruts do their scraping. This Almont plate is one of the most substantial in its Jeep range, 16.5 kg of 8mm EN AW-5083 H111 duralumin spanning the transmission area of the WJ and WG. When the middle of the truck grounds out, all that mass is what grinds, not the casings above it.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWJs that cross breakover ground, ledges and rutted climbs regularly\u003c\/li\u003e\n\u003cli\u003eOwners protecting the drivetrain core on a Jeep bought to be used, not queued\u003c\/li\u003e\n\u003cli\u003ePairing with the front plate for a covered run from bumper to transfer case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: gearbox and transfer case skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWJB8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WJ and WG\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne part for WJ and WG codes.\u003c\/li\u003e\n\u003cli\u003eMounts to the original chassis holes and threads; nothing needs modifying on a standard truck.\u003c\/li\u003e\n\u003cli\u003eModified transmission mounts, diff-drop kits and body lifts rule fitting out; raised suspension is fine.\u003c\/li\u003e\n\u003cli\u003eThe matching \u003ca href=\"\/products\/almont-grand-cherokee-wj-front-skid-plate-grand-cherokee-wg-front-skid-plate\"\u003eWJ\/WG front plate\u003c\/a\u003e covers the approach side.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWJB8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WJ \/ WG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy is this plate 16.5 kg?\u003c\/h3\u003e\u003cp\u003eIt is a large area of 8mm plate covering the gearbox and transfer case together. The mass is the point: a big, continuous surface for the chassis midline to slide on instead of the drivetrain.\u003c\/p\u003e\u003ch3\u003eDo I need the front plate fitted first?\u003c\/h3\u003e\u003cp\u003eAlmont carries no linked-mounting requirement on this part. The two plates simply cover adjoining areas, and most owners fit them together for a continuous run of cover.\u003c\/p\u003e","published_at":"2026-07-30T22:23:21+01:00","created_at":"2026-07-29T16:21:41+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wg","fits:jeep-grand-cherokee-wj","make:jeep","type:skid-plate"],"variants":[{"id":54838164947286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWJB8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"725.76","grams":16100,"compare_at_price":null,"position":1,"product_id":11149769703766,"created_at":"2026-07-29T16:21:41+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223326753110,"created_at":"2026-07-29T16:21:41+01:00","position":1,"updated_at":"2026-07-29T16:21:43+01:00","product_id":11149769703766,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWJB8-Jeep-Grand-Cherokee-WJ-WG.webp?v=1785338503","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769736534,"title":"Almont Jeep Grand Cherokee WK1\/WH Front Skid Plate for Original Bumper","handle":"almont-grand-cherokee-wk1-wh-front-skid-plate-for-original-bumper","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA WK1 Grand Cherokee still makes an honest trail and towing truck, and its front underside still takes the hits that come with that life. This Almont plate closes the nose off with 14.8 kg of 8mm EN AW-5083 H111 duralumin, cut for WK1 and WH trucks wearing the original bumper, with every engine covered by the same part. Kerbs, rocks and rutted ramps wear the plate; the hardware behind it stays dry and straight.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWK1 owners who lane, tow or launch on ground that reaches the front underside\u003c\/li\u003e\n\u003cli\u003eKeeping an older premium 4x4 out of the workshop after every rough weekend\u003c\/li\u003e\n\u003cli\u003eStarting underside cover at the end that touches first\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWKA8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WK1\/WH, all engines, original bumper\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 14.8 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCut for the original bumper; if your truck wears an aftermarket bumper, check with us which Almont plate suits it before ordering.\u003c\/li\u003e\n\u003cli\u003eWK1 and WH codes are both covered, all engines.\u003c\/li\u003e\n\u003cli\u003eRaised suspension is fine; body lifts and modified mounts, links or chassis are not.\u003c\/li\u003e\n\u003cli\u003eExtend cover with the \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-gearbox-and-transfer-skid-plate\"\u003eWK1\/WH gearbox and transfer plate\u003c\/a\u003e and \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-fuel-tank-skid-plate\"\u003efuel tank plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWKA8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WK1 \/ WH, all engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant Fitment\u003c\/td\u003e\n\u003ctd\u003eOriginal bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes engine choice change the part?\u003c\/h3\u003e\u003cp\u003eNo. Almont lists one plate for all WK1\/WH engines; the fit is set by the original bumper, not the drivetrain.\u003c\/p\u003e\u003ch3\u003eI have an aftermarket winch bumper. Can I use this?\u003c\/h3\u003e\u003cp\u003eThis cut is for the factory bumper. Almont makes bumper-matched plates across its range, so send us your bumper details and we will confirm the right part.\u003c\/p\u003e","published_at":"2026-07-30T22:23:23+01:00","created_at":"2026-07-29T16:21:42+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wh","fits:jeep-grand-cherokee-wk1","make:jeep","type:skid-plate"],"variants":[{"id":54838164980054,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWKA8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"699.30","grams":15000,"compare_at_price":null,"position":1,"product_id":11149769736534,"created_at":"2026-07-29T16:21:42+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223326982486,"created_at":"2026-07-29T16:21:42+01:00","position":1,"updated_at":"2026-07-29T16:21:45+01:00","product_id":11149769736534,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWKA8-Jeep-Grand-Cherokee-WK1.webp?v=1785338505","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769769302,"title":"Almont Jeep Grand Cherokee WK1\/WH Fuel Tank Skid Plate","handle":"almont-grand-cherokee-wk1-wh-fuel-tank-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe tank is the one component under a WK1 Grand Cherokee that turns a scrape into an emergency. It sits in reach of the rocks and debris the rear axle straddles, and it fails wet. This Almont plate covers the WK1\/WH tank area with 12.8 kg of 6mm EN AW-5083 H111 duralumin, SportDuty cover that lets the truck drag its tail through bad ground and drive home smelling of nothing.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWK1s that tour and lane beyond easy recovery distance\u003c\/li\u003e\n\u003cli\u003eCompleting the underside after the front and centre plates\u003c\/li\u003e\n\u003cli\u003eOwners who treat fuel containment as non-negotiable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: fuel tank skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWKD6\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WK1\/WH\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 12.8 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAlmont's tank plates cannot be fitted where the original tank has been replaced with a larger-capacity one.\u003c\/li\u003e\n\u003cli\u003eFitting instructions are included; check bolt tightness yearly and pressure wash after muddy or salty use.\u003c\/li\u003e\n\u003cli\u003ePair with the \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-front-skid-plate-for-original-bumper\"\u003efront plate\u003c\/a\u003e and \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-gearbox-and-transfer-skid-plate\"\u003egearbox and transfer plate\u003c\/a\u003e for full-length cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWKD6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WK1 \/ WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6mm SportDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy protect the tank before anything else at the rear?\u003c\/h3\u003e\u003cp\u003eBecause tank damage is the failure that strands the truck and creates a hazard at the same time. Everything else at the back dents; the tank leaks.\u003c\/p\u003e\u003ch3\u003eDoes it fit diesel and petrol trucks?\u003c\/h3\u003e\u003cp\u003eAlmont lists the plate by vehicle, WK1\/WH, and the tank area it covers is the same; if you are unsure about your exact build, send us the details before ordering.\u003c\/p\u003e","published_at":"2026-07-30T22:23:24+01:00","created_at":"2026-07-29T16:21:44+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wh","fits:jeep-grand-cherokee-wk1","make:jeep","type:skid-plate"],"variants":[{"id":54838165012822,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWKD6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"522.90","grams":13000,"compare_at_price":null,"position":1,"product_id":11149769769302,"created_at":"2026-07-29T16:21:44+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223327408470,"created_at":"2026-07-29T16:21:44+01:00","position":1,"updated_at":"2026-07-29T16:21:46+01:00","product_id":11149769769302,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWKD6-Proteccion-deposito-de-combustible-Jeep-Grand-Cherokee-WK1-WH.jpg?v=1785338506","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769802070,"title":"Almont Jeep Grand Cherokee WK1\/WH Gearbox and Transfer Skid Plate","handle":"almont-grand-cherokee-wk1-wh-gearbox-and-transfer-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eBetween a WK1's axles run the gearbox and transfer case, low enough for rock crests and rutted centre lines to find them. Casing damage there does not buff out; it drains. This Almont plate bolts 11.5 kg of 8mm EN AW-5083 H111 duralumin under the WK1\/WH transmission area, so the ground gets a wear surface and the four-wheel-drive hardware keeps its oil. It is the natural second stage after the front plate.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWK1s crossing crests and ruts where the chassis midline grounds\u003c\/li\u003e\n\u003cli\u003eProtecting transmission casings on a truck used for towing and touring\u003c\/li\u003e\n\u003cli\u003eOwners building continuous cover from nose to tank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: gearbox and transfer case skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWKB8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WK1\/WH\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 11.5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMounts to the original chassis holes with the supplied brackets and bolts.\u003c\/li\u003e\n\u003cli\u003eModified transmission or anti-roll-bar mounts, diff-drop kits and body lifts rule fitting out; raised suspension is fine.\u003c\/li\u003e\n\u003cli\u003eBracket it with the \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-front-skid-plate-for-original-bumper\"\u003efront plate\u003c\/a\u003e and the \u003ca href=\"\/products\/almont-grand-cherokee-wk1-wh-fuel-tank-skid-plate\"\u003efuel tank plate\u003c\/a\u003e for the full centre line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWKB8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WK1 \/ WH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e11.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs it one plate for the gearbox and the transfer case?\u003c\/h3\u003e\u003cp\u003eYes, the plate spans both, covering the transmission run in the centre of the truck.\u003c\/p\u003e\u003ch3\u003eWhat tools does fitting need?\u003c\/h3\u003e\u003cp\u003eTypically 13mm and 17mm sockets or spanners and 5mm and 6mm Allen keys, using the original chassis holes and the supplied hardware. Instructions come in the box.\u003c\/p\u003e","published_at":"2026-07-30T22:23:26+01:00","created_at":"2026-07-29T16:21:45+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wh","fits:jeep-grand-cherokee-wk1","make:jeep","type:skid-plate"],"variants":[{"id":54838165045590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWKB8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"522.90","grams":13000,"compare_at_price":null,"position":1,"product_id":11149769802070,"created_at":"2026-07-29T16:21:45+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223327474006,"created_at":"2026-07-29T16:21:45+01:00","position":1,"updated_at":"2026-07-29T16:21:47+01:00","product_id":11149769802070,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWKB8-Jeep-Grand-Cherokee-WK1-WH.webp?v=1785338507","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769834838,"title":"Almont Jeep Grand Cherokee WK2 Front Skid Plate for Original Bumper","handle":"almont-grand-cherokee-wk2-front-skid-plate-for-original-bumper","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe WK2 Grand Cherokee is more refined than its ancestors, but gravel firebreaks, field entrances and towing ramps do not care about refinement. The front underside still leads every approach, and this Almont plate makes sure it leads with 14.8 kg of 8mm EN AW-5083 H111 duralumin rather than factory hardware. It is a HeavyDuty cut for WK2 trucks on the original bumper, with all engines covered by one part.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWK2s that tow, lane or launch where approach contact happens\u003c\/li\u003e\n\u003cli\u003eOwners adding real underside cover to a road-refined 4x4\u003c\/li\u003e\n\u003cli\u003eProtecting a family truck before its first proper green lane season\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWK2A8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WK2, all engines, original bumper\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 14.8 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOriginal-bumper fit; for an aftermarket bumper, check with us which plate suits it before ordering.\u003c\/li\u003e\n\u003cli\u003eMounts into the original chassis holes; raised suspension is fine, body lifts are not.\u003c\/li\u003e\n\u003cli\u003ePair with the \u003ca href=\"\/products\/almont-grand-cherokee-wk2-gearbox-and-transfer-skid-plate\"\u003eWK2 gearbox and transfer plate\u003c\/a\u003e for the centre of the truck.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWK2A8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WK2, all engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant Fitment\u003c\/td\u003e\n\u003ctd\u003eOriginal bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill it fit my diesel WK2?\u003c\/h3\u003e\u003cp\u003eYes. Almont lists all engines for this plate; what matters is the original front bumper.\u003c\/p\u003e\u003ch3\u003eWhat upkeep does the plate need once fitted?\u003c\/h3\u003e\u003cp\u003eA pressure wash once a year, two or three after salty or muddy work, and an annual check of bolt tightness. Scars on the plate face are it doing its job.\u003c\/p\u003e","published_at":"2026-07-30T22:23:28+01:00","created_at":"2026-07-29T16:21:47+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wk2","make:jeep","type:skid-plate"],"variants":[{"id":54838165078358,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWK2A8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"699.30","grams":15000,"compare_at_price":null,"position":1,"product_id":11149769834838,"created_at":"2026-07-29T16:21:47+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223327637846,"created_at":"2026-07-29T16:21:47+01:00","position":1,"updated_at":"2026-07-29T16:21:49+01:00","product_id":11149769834838,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWK2A8-frontal-jeep-grand-cherokee-WK2.jpg?v=1785338509","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149769867606,"title":"Almont Jeep Grand Cherokee WK2 Gearbox and Transfer Skid Plate","handle":"almont-grand-cherokee-wk2-gearbox-and-transfer-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA WK2 crossing a rutted field entrance carries its gearbox and transfer case closer to the ground than its owner usually realises. One deep crest and the sump-level hardware takes a strike engineered for nothing of the kind. This Almont plate spans the WK2's transmission area with 11.5 kg of 8mm EN AW-5083 H111 duralumin, HeavyDuty cover that turns driveline strikes into cosmetic history.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWK2s that tow and tour beyond smooth tarmac\u003c\/li\u003e\n\u003cli\u003eProtecting transmission casings on the family and towing truck\u003c\/li\u003e\n\u003cli\u003eCompleting the front-and-centre pair with the matching front plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: gearbox and transfer case skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDJWK2B8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee WK2\u003c\/li\u003e\n\u003cli\u003eMaterial and thickness: EN AW-5083 H111 certified duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 11.5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate-instruction manual and sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMounts to the original chassis holes with the supplied hardware; fitting instructions included.\u003c\/li\u003e\n\u003cli\u003eModified transmission mounts, diff-drop kits and body lifts rule fitting out; raised suspension is accepted.\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/almont-grand-cherokee-wk2-front-skid-plate-for-original-bumper\"\u003eWK2 front plate\u003c\/a\u003e covers the approach ahead of this plate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD, Spain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDJWK2B8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee WK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm HeavyDuty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e11.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year Almont cover against cracking; dents and deformation excluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo all WK2 drivetrains take the same plate?\u003c\/h3\u003e\u003cp\u003eAlmont lists this part for the WK2 without an engine split. If your truck runs an unusual driveline spec, send us the details and we will confirm before you order.\u003c\/p\u003e\u003ch3\u003eWhat ongoing care does it need?\u003c\/h3\u003e\u003cp\u003eAn annual pressure wash, more often after mud or salt, plus a yearly bolt-tightness check. Damage to the plate itself is what it is there for.\u003c\/p\u003e","published_at":"2026-07-30T22:23:29+01:00","created_at":"2026-07-29T16:21:48+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:jeep-grand-cherokee-wk2","make:jeep","type:skid-plate"],"variants":[{"id":54838165111126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDJWK2B8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"556.92","grams":11500,"compare_at_price":null,"position":1,"product_id":11149769867606,"created_at":"2026-07-29T16:21:48+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83223327736150,"created_at":"2026-07-29T16:21:48+01:00","position":1,"updated_at":"2026-07-29T16:21:52+01:00","product_id":11149769867606,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDJWK2B8-Jeep-Grand-Cherokee-WK2.webp?v=1785338512","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10953186836822,"title":"Apex Chassis KIT102 HD Ball Joint Kit - Jeep Wrangler JK \u0026 Grand Cherokee","handle":"apex-chassis-kit102-hd-ball-joint-kit-jeep-wrangler-jk-grand-cherokee","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis HD Ball Joint Kit for the Jeep JK and Grand Cherokee puts tight, confident steering back into a Jeep front axle. On a Wrangler JK (2007-2018) or Grand Cherokee (1999-2004), worn ball joints show up as wander on the motorway, vibration through the wheel and vague response on the trail - and lifted setups with larger tyres wear the factory joints even faster. This kit replaces the front joints with forged steel housings and heat-treated chromoly studs built to carry that load. It is a genuine Apex Chassis part, imported to the UK.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJeep JK owners chasing out steering wander, vibration or death-wobble contributors\u003c\/li\u003e\n\u003cli\u003eLifted JK builds on larger tyres that load the front joints harder than stock\u003c\/li\u003e\n\u003cli\u003eGrand Cherokee (1999-2004) owners restoring worn front-end feel\u003c\/li\u003e\n\u003cli\u003eTrail and daily Jeeps that need a fit-once fix rather than repeat factory joints\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Joints Matter On A Solid Axle\u003c\/h2\u003e\u003cp\u003eThe ball joints locate the steering knuckle on the axle, so every input - steering, braking, articulation - passes through them. Once they wear, no amount of tracking adjustment brings back precision. Compared with fitting another set of factory-style joints, this kit's CNC-machined forged housings and polished chromoly studs are built for the loads a modified or hard-driven Jeep actually sees.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Apex Chassis (USA)\u003c\/li\u003e\n\u003cli\u003eProduct Type: HD ball joint kit (front, full vehicle set)\u003c\/li\u003e\n\u003cli\u003eSKU: KIT102\u003c\/li\u003e\n\u003cli\u003eIncluded Items: 2x BJ107 upper, 2x BJ109 lower\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Jeep Grand Cherokee (1999-2004) 2WD or 4WD; Jeep Wrangler JK (2007-2018) 4WD\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged steel housings, chromoly ball studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cp\u003eConfirm your model and year against the application list before ordering - fitment shown is manufacturer reference. Ball joint replacement on these axles is a press-in job, so plan the right tooling or a workshop visit, and book an alignment afterwards. If you are curing death wobble, inspect track bar, tie rod ends and steering damper at the same time so one worn part does not mask another.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHD ball joint kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eKIT102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Items\u003c\/td\u003e\n\u003ctd\u003e2x BJ107 upper; 2x BJ109 lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eJeep Grand Cherokee 1999-2004 2WD\/4WD; Jeep Wrangler JK 2007-2018 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged steel housings, chromoly studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this help with death wobble on my JK?\u003c\/h3\u003e\u003cp\u003eWorn ball joints are a common contributor. This kit replaces them with heavy-duty units, but check the track bar, tie rod ends and damper too - wobble usually has more than one worn part behind it.\u003c\/p\u003e\u003ch3\u003eDoes it fit both 2WD and 4WD Grand Cherokees?\u003c\/h3\u003e\u003cp\u003eYes - the 1999-2004 Grand Cherokee application covers 2WD and 4WD. The Wrangler JK application is 4WD.\u003c\/p\u003e\u003ch3\u003eDo I need special tools to fit them?\u003c\/h3\u003e\u003cp\u003eThe joints press into the axle, so a ball joint press or workshop install is the right route, followed by a wheel alignment.\u003c\/p\u003e\u003cp\u003eRebuilding the whole steering system? The \u003ca href=\"\/products\/apex-chassis-kit140-2-5-ton-prolock-steering-kit-polished-aluminium-jeep-wrangler-jk\"\u003eKIT140 ProLock steering kit\u003c\/a\u003e pairs with these joints for a complete JK front-end overhaul.\u003c\/p\u003e","published_at":"2026-07-09T09:26:58+01:00","created_at":"2026-07-08T14:59:17+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"Apex Chassis","product_type":"Performance","tags":["Apex Chassis","Ball Joint Kit","brand:apex-chassis","cat:driveline-steering","dept:performance-parts","fits:jeep-grand-cherokee","fits:jeep-wrangler-jk","Jeep Wrangler JK","make:jeep","type:ball-joints"],"variants":[{"id":54474183016790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KIT102","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"430.00","grams":2270,"compare_at_price":null,"position":1,"product_id":10953186836822,"created_at":"2026-07-08T14:59:17+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":82239080825174,"created_at":"2026-07-08T14:59:17+01:00","position":1,"updated_at":"2026-07-08T14:59:20+01:00","product_id":10953186836822,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT102-1.jpg?v=1783519160","width":1200,"height":1200}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11150383677782,"title":"Planted Seat Bracket - Jeep Grand Cherokee [3rd Generation] (2005-2010) - Left side","handle":"planted-seat-bracket-jeep-grand-cherokee-3rd-generation-2005-2010-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Jeep Grand Cherokee [3rd Generation] (2005-2010) - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB315DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB315DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:42:42+01:00","created_at":"2026-07-30T11:36:56+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:jeep-grand-cherokee","Jeep","make:jeep","planted","planted-seat-bracket","planted-technology","type:seat-bracket"],"variants":[{"id":54841606537558,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB315DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150383677782,"created_at":"2026-07-30T11:36:56+01:00","updated_at":"2026-09-09T18:53:24+01:00"},{"id":54841606570326,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB315DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150383677782,"created_at":"2026-07-30T11:36:56+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83238287343958,"created_at":"2026-07-30T15:35:51+01:00","position":1,"updated_at":"2026-07-30T15:35:54+01:00","product_id":11150383677782,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315DR-1_8ff7a9ad-ec17-46d5-95a5-9102f70e008f.jpg?v=1785422154","width":5000,"height":3333},{"id":83238287376726,"created_at":"2026-07-30T15:35:51+01:00","position":2,"updated_at":"2026-07-30T15:35:54+01:00","product_id":11150383677782,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315DR-2.jpg?v=1785422154","width":5000,"height":3333},{"id":83238287409494,"created_at":"2026-07-30T15:35:51+01:00","position":3,"updated_at":"2026-07-30T15:35:54+01:00","product_id":11150383677782,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315DR-3.jpg?v=1785422154","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150383710550,"title":"Planted Seat Bracket - Jeep Grand Cherokee [3rd Generation] (2005-2010) - Right side","handle":"planted-seat-bracket-jeep-grand-cherokee-3rd-generation-2005-2010-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Jeep Grand Cherokee [3rd Generation] (2005-2010) - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB315PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB315PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:42:39+01:00","created_at":"2026-07-30T11:36:57+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:jeep-grand-cherokee","Jeep","make:jeep","planted","planted-seat-bracket","planted-technology","type:seat-bracket"],"variants":[{"id":54841606603094,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB315PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150383710550,"created_at":"2026-07-30T11:36:58+01:00","updated_at":"2026-09-09T18:53:24+01:00"},{"id":54841606635862,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB315PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150383710550,"created_at":"2026-07-30T11:36:58+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83238287442262,"created_at":"2026-07-30T15:35:52+01:00","position":1,"updated_at":"2026-07-30T15:35:55+01:00","product_id":11150383710550,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315PA-1_9a9c616b-9950-47e2-83bb-8aa7b89b8de5.jpg?v=1785422155","width":5000,"height":3333},{"id":83238287475030,"created_at":"2026-07-30T15:35:52+01:00","position":2,"updated_at":"2026-07-30T15:35:55+01:00","product_id":11150383710550,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315PA-2.jpg?v=1785422155","width":5000,"height":3333},{"id":83238287507798,"created_at":"2026-07-30T15:35:52+01:00","position":3,"updated_at":"2026-07-30T15:35:55+01:00","product_id":11150383710550,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB315PA-3.jpg?v=1785422155","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150383743318,"title":"Planted Seat Bracket - Jeep Grand Cherokee [4th Generation] (2011+) - Left side","handle":"planted-seat-bracket-jeep-grand-cherokee-4th-generation-2011-driver-left","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Jeep Grand Cherokee [4th Generation] (2011+) - Driver \/ Left\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB292DR\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB292DR\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:42:37+01:00","created_at":"2026-07-30T11:36:59+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:jeep-grand-cherokee","Jeep","make:jeep","planted","planted-seat-bracket","planted-technology","type:seat-bracket"],"variants":[{"id":54841606668630,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB292DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150383743318,"created_at":"2026-07-30T11:36:59+01:00","updated_at":"2026-09-09T18:53:24+01:00"},{"id":54841606701398,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB292DR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150383743318,"created_at":"2026-07-30T11:36:59+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83238287540566,"created_at":"2026-07-30T15:35:52+01:00","position":1,"updated_at":"2026-07-30T15:35:56+01:00","product_id":11150383743318,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292DR-1_cb1f0259-d28b-46a8-90c1-cd61d592f4f7.jpg?v=1785422156","width":5000,"height":3333},{"id":83238287573334,"created_at":"2026-07-30T15:35:52+01:00","position":2,"updated_at":"2026-07-30T15:35:56+01:00","product_id":11150383743318,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292DR-2.jpg?v=1785422156","width":5000,"height":3333},{"id":83238287606102,"created_at":"2026-07-30T15:35:52+01:00","position":3,"updated_at":"2026-07-30T15:35:56+01:00","product_id":11150383743318,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292DR-3.jpg?v=1785422156","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]},{"id":11150383776086,"title":"Planted Seat Bracket - Jeep Grand Cherokee [4th Generation] (2011+) - Right side","handle":"planted-seat-bracket-jeep-grand-cherokee-4th-generation-2011-passenger-right","body_html":"\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlanted Seat Bracket- Jeep Grand Cherokee [4th Generation] (2011+) - Passenger \/ Right\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide of vehicle:\u003c\/strong\u003e Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSlider bolt pattern options and Planted part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSlider bolt pattern\u003c\/th\u003e\n\u003cth\u003ePlanted part number\u003c\/th\u003e\n\u003cth\u003eWhat this option includes (Planted)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard \/ RECARO pattern\u003c\/td\u003e\n\u003ctd\u003eSB292PA\u003c\/td\u003e\n\u003ctd\u003eIncludes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlternate \/ Cobra and Scheel-Mann pattern\u003c\/td\u003e\n\u003ctd\u003eCOBRA-SB292PA\u003c\/td\u003e\n\u003ctd\u003eReplaces the Recaro slider bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct information from Planted\u003c\/h3\u003e\n\u003cp\u003eThe Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. We create each seat bracket using the floor of the vehicle as a reference. We literally bring each vehicle into our development center so we can create the best fitting, bolt in, universal seat bracket possible.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Pattern Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach seat bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Scheel-Mann***, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eWe offer two different bolt pattern options:\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eStandard\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Includes the Recaro slider bolt pattern but not the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eAlternate\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e: Replaces the Recaro silder bolt pattern with the Cobra \u0026amp; Scheel-Mann slider bolt pattern.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e*Bride sliders are generally made to be vehicle specific so need to have the \"feet\" removed to make them \"universal.\" Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.\u003c\/p\u003e\n\u003cp\u003e**Cobra sliders come in Narrow and Wide versions. The Wide version will require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option. The Narrow version slider requires no modification.\u003c\/p\u003e\n\u003cp\u003e***Scheel-Mann sliders require the \"Alternate Bolt Pattern\" option or elongating one hole on each slider by 1\/8 Inch if using the \"standard bolt pattern\" option.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal. Strong. Secure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlanted Seat Brackets are laser cut from 3\/16 inch thick steel and hand welded to ensure weld penetration for superior strength. They are finished with a black powder coat and applications are available for many vehicles, however Planted is continually looking for more vehicles to create brackets for.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nEach Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met.\u003c\/li\u003e\n\u003cli\u003e\nAll Planted Seat Brackets are hand welded in the USA.\u003c\/li\u003e\n\n\u003cli\u003eBeware of counterfeit seat brackets and other products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.\u003c\/li\u003e\n\u003cli\u003eMany vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat.\n\u003c\/li\u003e\n\u003cli\u003eReplacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and\/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work \u0026amp; which resistor to use.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003cbr\u003e","published_at":"2026-07-31T09:42:34+01:00","created_at":"2026-07-30T11:37:00+01:00","updated_at":"2026-09-09T18:53:24+01:00","vendor":"Planted Technology","product_type":"Seat Bracket","tags":["brand:planted-technology","cat:base-plates-mounting","dept:vehicle-seats","fits:jeep-grand-cherokee","Jeep","make:jeep","planted","planted-seat-bracket","planted-technology","type:seat-bracket"],"variants":[{"id":54841606734166,"title":"Standard \/ RECARO pattern","option1":"Standard \/ RECARO pattern","option2":null,"option3":null,"sku":"SB292PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":1,"product_id":11150383776086,"created_at":"2026-07-30T11:37:01+01:00","updated_at":"2026-09-09T18:53:24+01:00"},{"id":54841606766934,"title":"Alternate \/ Cobra and Scheel-Mann pattern","option1":"Alternate \/ Cobra and Scheel-Mann pattern","option2":null,"option3":null,"sku":"COBRA-SB292PA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"298.38","grams":0,"compare_at_price":null,"position":2,"product_id":11150383776086,"created_at":"2026-07-30T11:37:01+01:00","updated_at":"2026-09-09T18:53:24+01:00"}],"images":[{"id":83238287901014,"created_at":"2026-07-30T15:35:53+01:00","position":1,"updated_at":"2026-07-30T15:35:57+01:00","product_id":11150383776086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292PA-1_a863dc06-473a-49f1-9106-a52048a17cc9.jpg?v=1785422157","width":5000,"height":3333},{"id":83238287933782,"created_at":"2026-07-30T15:35:53+01:00","position":2,"updated_at":"2026-07-30T15:35:57+01:00","product_id":11150383776086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292PA-2.jpg?v=1785422157","width":5000,"height":3333},{"id":83238287966550,"created_at":"2026-07-30T15:35:53+01:00","position":3,"updated_at":"2026-07-30T15:35:56+01:00","product_id":11150383776086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/SB292PA-3.jpg?v=1785422156","width":5000,"height":3333}],"options":[{"name":"Slider bolt pattern","position":1,"values":["Standard \/ RECARO pattern","Alternate \/ Cobra and Scheel-Mann pattern"]}]}]}