{"title":"Driveline \u0026 Steering","description":null,"products":[{"product_id":"arb-high-level-breather-kit","title":"ARB High Level Differential Breather Kit – Off-Road Drivetrain Protection for Water Crossings","description":"\u003ch2\u003eARB High Level Differential Breather Kit for Off-Road Drivetrain Protection\u003c\/h2\u003e\n\n\u003ch2\u003eHow the ARB Differential Breather Kit Protects Your Drivetrain\u003c\/h2\u003e\n\u003cp\u003eThe ARB High Level Differential Breather Kit is engineered to prevent water, dust, and debris from entering your vehicle’s differentials, gearbox, and transfer case during challenging off-road conditions. By relocating the breather points to a high, protected position, this kit helps avoid the costly repairs and reliability issues caused by water ingress—especially during river crossings or deep mud. If you regularly tackle water hazards, overland routes, or dusty tracks, this kit is designed to keep your drivetrain internals clean and dry, safeguarding your investment and supporting long-term performance.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Choose This ARB Breather Kit?\u003c\/h2\u003e\n\u003cp\u003eThis kit is ideal for 4WD owners, off-road enthusiasts, overlanders, and expedition drivers who demand reliable drivetrain protection. It is particularly valuable for those running ARB Air Lockers or performance differentials, as well as anyone who frequently encounters water crossings or deep mud. The universal design suits a wide range of vehicles, including popular platforms like the Ford Ranger Raptor and other ARB-equipped builds. If you want to minimise the risk of oil contamination and mechanical failure on remote adventures, this kit is a practical upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Makes This ARB Kit Distinct?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned by ARB, a leader in 4x4 protection and off-road solutions\u003c\/li\u003e\n  \u003cli\u003eCentral manifold supports up to four drivetrain assemblies—front and rear differentials, gearbox, and transfer case\u003c\/li\u003e\n  \u003cli\u003eHigh-flow, zero back pressure design ensures consistent venting and reduces vacuum risk\u003c\/li\u003e\n  \u003cli\u003eFlexible, oil and heat resistant 8mm polyethylene tubing for robust routing\u003c\/li\u003e\n  \u003cli\u003eIncludes a washable, splash-resistant ARB compressor air filter for long-term reliability\u003c\/li\u003e\n  \u003cli\u003eCompact, anodised billet aluminium manifold for corrosion resistance and easy mounting\u003c\/li\u003e\n  \u003cli\u003eKit contains all required fittings, tubing, and mounting hardware for a straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnlike generic breather kits, this ARB solution is engineered for demanding off-road use, with components selected for durability and ease of installation. The high-flow manifold and 8mm tubing help prevent oil blockages and ensure your drivetrain breathes freely, even on extended overland journeys.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Use Cases and Compatibility Guidance\u003c\/h2\u003e\n\u003cp\u003eThe ARB High Level Differential Breather Kit is suitable for most 4WDs and off-road vehicles with multiple drivetrain assemblies. It is commonly fitted to vehicles such as the Ford Ranger Raptor, Toyota Land Cruiser, Nissan Patrol, and other expedition-ready builds. The kit’s universal design allows it to adapt to a variety of axle, gearbox, and transfer case layouts. For best results, check your vehicle’s existing breather locations and confirm the number of assemblies you wish to protect. If your build includes ARB Air Lockers or other performance drivetrain components, this kit is a recommended upgrade to prevent oil contamination and maximise reliability.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits for Off-Road and Expedition Drivers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents water and dust from contaminating drivetrain oil during river crossings and mud runs\u003c\/li\u003e\n  \u003cli\u003eSupports up to four assemblies for complete drivetrain coverage\u003c\/li\u003e\n  \u003cli\u003eReduces risk of costly repairs and downtime due to water ingress\u003c\/li\u003e\n  \u003cli\u003eHelps protect ARB Air Lockers and performance differentials\u003c\/li\u003e\n  \u003cli\u003eSimple, reliable installation with push-in fittings and included hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eARB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eDifferential Breather Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManifold Material\u003c\/th\u003e\n\u003ctd\u003eAnodised Billet Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Breather Ports\u003c\/th\u003e\n\u003ctd\u003e4 x 1\/8” BSP (for breather lines), 1 x 1\/4” NPT (for air filter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTubing\u003c\/th\u003e\n\u003ctd\u003e8m x 8mm Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir Filter\u003c\/th\u003e\n\u003ctd\u003eARB Compressor Air Filter (washable, splash resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eVenting for differentials, gearbox, and transfer case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation and Maintenance Notes\u003c\/h2\u003e\n\u003cp\u003eThe ARB High Level Differential Breather Kit is designed for straightforward DIY installation. The compact manifold can be mounted in most engine bays using the supplied self-tapping screws or standard M6 bolts. Flexible 8mm tubing and push-in fittings simplify routing to high points on the vehicle, ensuring breathers remain above water level. Periodically inspect and clean the washable air filter, especially after dusty or wet conditions, to maintain optimal airflow and protection. For complex builds or if you are unsure about compatibility, consult a professional installer or your vehicle’s service manual.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the ARB Differential Breather Kit prevent water ingress?\u003c\/h3\u003e\n\u003cp\u003eBy relocating the breather points to a high, protected position and using a high-flow manifold, the kit prevents water from being drawn into drivetrain assemblies during rapid cooling in water crossings.\u003c\/p\u003e\n\u003ch3\u003eWhich vehicles are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe universal design fits most 4WDs, including popular models like the Ford Ranger Raptor, Toyota Land Cruiser, and Nissan Patrol. Always check your drivetrain layout and breather locations before installation.\u003c\/p\u003e\n\u003ch3\u003eCan I connect all my drivetrain assemblies to this kit?\u003c\/h3\u003e\n\u003cp\u003eYes, the kit supports up to four assemblies—typically front and rear differentials, gearbox, and transfer case—depending on your vehicle’s configuration.\u003c\/p\u003e\n\u003ch3\u003eIs the kit suitable for vehicles with ARB Air Lockers?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. The kit is designed to help protect ARB Air Lockers and other performance components by preventing oil contamination and supporting reliable operation in challenging conditions.\u003c\/p\u003e\n\u003ch3\u003eIs DIY installation possible?\u003c\/h3\u003e\n\u003cp\u003eYes, the kit is suitable for DIY installation with basic tools. Clear instructions and push-in fittings simplify the process, but professional fitting is recommended if you are unsure about your vehicle’s setup.\u003c\/p\u003e\n\u003ch3\u003eHow often should the air filter be maintained?\u003c\/h3\u003e\n\u003cp\u003eInspect and clean the washable sintered bronze filter regularly, especially after exposure to dust or water, to ensure continued high airflow and protection.\u003c\/p\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":52099399057750,"sku":"XADS170112","price":59.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/1_78bdbf9d-1706-4e35-8f3a-36173ac5fd20.png?v=1765975002"},{"product_id":"apex-chassis-heavy-duty-tie-rod-kit-ford-bronco-2020-2025-ranger-raptor-2019-2025-upgraded-steering-tie-rods","title":"Apex Chassis KIT300 Heavy Duty Tie Rod Kit - Ford Bronco and Ranger Raptor Steering Upgrade","description":"\u003ch2\u003eApex Chassis KIT300 Front Tie Rod Kit for Ford Bronco and Ranger Raptor\u003c\/h2\u003e\u003cp\u003eThe Apex Chassis KIT300 Heavy Duty Tie Rod Kit is a front steering upgrade for Ford Bronco 4WD and Ford Ranger Raptor 4WD owners who want more confidence from the steering linkage during off-road use, loaded trips and daily driving. It replaces the standard tie rod assemblies with a stronger, serviceable kit designed around forged steel and chromoly components.\u003c\/p\u003e\u003cp\u003eFor shoppers comparing steering upgrades, KIT300 is focused on steering system reinforcement. It is not a full steering rack, suspension lift kit or cosmetic accessory. It targets the tie rods, which are a critical connection between rack movement and front wheel direction.\u003c\/p\u003e\u003ch2\u003eWhat This Steering Tie Rod Kit Improves\u003c\/h2\u003e\u003cp\u003eSteering tie rods transfer movement from the steering rack to the front wheels. When a 4x4 is used on ruts, rocks, mud, sand or rough tracks, those parts can see higher loads than they would in normal road use. Larger tyre setups can also add stress to the front steering linkage.\u003c\/p\u003e\u003cp\u003eThe KIT300 helps address that by strengthening a key point in the steering system. Apex Chassis uses a design stated as 33% larger than OE, with solid steel forged housings, forged chromoly ball studs and a metal-to-metal bearing design. The result is a heavy duty replacement kit aimed at durability and serviceability for demanding use.\u003c\/p\u003e\u003ch2\u003eWho This Apex Chassis KIT300 Kit Is For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFord Ranger Raptor 4WD drivers using their vehicle on trails, sand, rough rural roads or expedition routes.\u003c\/li\u003e\n\u003cli\u003eFord Bronco 4WD owners wanting a stronger front steering tie rod solution for mixed road and off-road use.\u003c\/li\u003e\n\u003cli\u003eDrivers running larger tyres where steering components may see increased load.\u003c\/li\u003e\n\u003cli\u003eWorkshop builds replacing worn steering parts while upgrading front-end durability.\u003c\/li\u003e\n\u003cli\u003eOwners who want a greaseable, maintainable tie rod kit rather than a basic like-for-like replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a practical upgrade for off-road and performance 4x4 builds because it focuses on a component that directly affects steering response, wheel control and front-end serviceability.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility Notes\u003c\/h2\u003e\u003cp\u003eThe kit is designed for Ranger Raptor 2019-2025 4WD applications and Ford Bronco 4WD applications. Manufacturer application data lists Ford Bronco 2021-2025 4WD and excludes Bronco Sport. If you are buying for a 2020 Bronco, check compatibility before ordering because model-year references can differ.\u003c\/p\u003e\u003cp\u003eBronco fitment information includes Big Bend, Black Diamond, Outer Banks, Heritage, Heritage Limited and Badlands variants. Support is listed for HOSS 1.0 and HOSS 2.0. HOSS 3.0 applications are noted as requiring the boot to be stretched over the rack side during fitting.\u003c\/p\u003e\u003cp\u003eBecause steering parts are vehicle-specific, check your vehicle year, drivetrain, suspension package and existing steering setup before purchase. If the vehicle has aftermarket steering or suspension modifications, professional fitment checking is sensible.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eApex Chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eKIT300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHeavy duty front steering tie rod kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity Per Vehicle\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Applications\u003c\/th\u003e\n\u003ctd\u003eFord Bronco 2021-2025 4WD and Ranger Raptor 2019-2025 4WD, with fitment notes checked before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExcluded Application\u003c\/th\u003e\n\u003ctd\u003eBronco Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eSAE 1045 solid steel forged housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Stud Material\u003c\/th\u003e\n\u003ctd\u003eSAE 4140 hot forged chromoly ball studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot Material\u003c\/th\u003e\n\u003ctd\u003eCR rubber boots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing Design\u003c\/th\u003e\n\u003ctd\u003eMetal-to-metal bearing design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eDurable E-coat finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService Features\u003c\/th\u003e\n\u003ctd\u003ePre-greased, greaseable and supplied with zerk fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eGrade 8 \/ class 10.9 hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003ctd\u003eTie rods, boots, zerk fittings and necessary hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eServiceability and Installation Considerations\u003c\/h2\u003e\u003cp\u003eThe KIT300 is supplied pre-greased and uses zerk fittings, so greasing can be incorporated into routine inspection. Greaseable joints are useful on off-road vehicles because mud, water, grit and repeated articulation can accelerate wear if steering parts are ignored.\u003c\/p\u003e\u003cp\u003eInstallation involves front steering components, so correct tools, tightening procedure and alignment checks matter. After any tie rod change, a professional wheel alignment is recommended before serious road or off-road use, because tie rods affect front toe and steering geometry.\u003c\/p\u003e\u003cp\u003eDocumented service boot references include outer boot XP109 and inner boot BEL300, helping make future boot replacement easier to identify.\u003c\/p\u003e\u003ch2\u003eWhy Choose KIT300 Instead of a Basic Replacement Tie Rod\u003c\/h2\u003e\u003cp\u003eA standard replacement tie rod can restore worn parts, but the Apex Chassis KIT300 is aimed at reinforcement. The 33% larger than OE design, SAE 1045 forged steel housing, SAE 4140 hot forged chromoly ball studs, metal-to-metal bearing layout and E-coat finish make it a stronger choice for vehicles that regularly see off-road steering loads.\u003c\/p\u003e\u003cp\u003eFor a Ranger Raptor or Bronco build, the benefit is straightforward: the steering linkage is upgraded with serviceable heavy duty components rather than left as a weak point in an otherwise capable vehicle setup.\u003c\/p\u003e\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConfirm your vehicle is a Ford Bronco 4WD or Ranger Raptor 4WD application covered by the kit.\u003c\/li\u003e\n\u003cli\u003eCheck Bronco model year carefully, particularly for 2020 vehicles.\u003c\/li\u003e\n\u003cli\u003eCheck whether your Bronco has HOSS 1.0, HOSS 2.0 or HOSS 3.0 suspension.\u003c\/li\u003e\n\u003cli\u003eRemember that HOSS 3.0 applications have a rack-side boot fitting note.\u003c\/li\u003e\n\u003cli\u003ePlan for wheel alignment after installation.\u003c\/li\u003e\n\u003cli\u003eInspect surrounding steering and suspension components at the same time, especially on vehicles used off-road.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat does the Apex Chassis KIT300 replace?\u003c\/h3\u003e\u003cp\u003eIt replaces the front steering tie rod assemblies with a heavy duty kit supplied for the vehicle as a pair.\u003c\/p\u003e\u003ch3\u003eDoes it fit the Ford Bronco Sport?\u003c\/h3\u003e\u003cp\u003eNo. Manufacturer fitment information excludes Bronco Sport.\u003c\/p\u003e\u003ch3\u003eWhich Ranger Raptor years are covered?\u003c\/h3\u003e\u003cp\u003eFitment is listed for Ranger Raptor 2019-2025 4WD applications. Check exact vehicle details before ordering if your vehicle has non-standard steering or suspension parts.\u003c\/p\u003e\u003ch3\u003eWhat should Ford Bronco owners check?\u003c\/h3\u003e\u003cp\u003eManufacturer fitment information lists Bronco 2021-2025 4WD and notes HOSS 1.0 and HOSS 2.0 support. HOSS 3.0 needs the boot stretched over the rack side when fitted. Check 2020 model-year vehicles carefully before ordering.\u003c\/p\u003e\u003ch3\u003eIs the kit greaseable?\u003c\/h3\u003e\u003cp\u003eYes. It is listed as pre-greased and greaseable, with zerk fittings included for maintenance.\u003c\/p\u003e\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\u003cp\u003eA wheel alignment is recommended after changing tie rods because they affect front toe and steering geometry.\u003c\/p\u003e\n\u003ch2\u003ePayment Terms\u003c\/h2\u003e\n\u003cp\u003eFor UK customers, the price shown includes VAT, customs charges and supplier shipping costs, so you can order with confidence and avoid unexpected customs bills after purchase. If any customs-related questions or issues arise, Hoonies Adrenaline will handle them for you.\u003c\/p\u003e\n\u003cp\u003eFor orders outside the UK, please contact us through the contact form before purchasing so we can prepare a personalised quote.\u003c\/p\u003e\n\u003ch2\u003eShipping and Lead Times\u003c\/h2\u003e\n\u003cp\u003eWe aim to keep strong stock availability across the products we sell, but imported, specialist and custom-order items may have a lead time. If you need an estimated delivery window before ordering, please contact us and we will be happy to check this for you.\u003c\/p\u003e\n\u003cp\u003eIf you place an order for an item that is currently out of stock or already on order with a supplier, Hoonies Adrenaline will contact you as soon as possible with an update.\u003c\/p\u003e","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":52451102032214,"sku":"KIT300","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/KIT3001.png?v=1769589350"}],"url":"https:\/\/hooniesadrenaline.co.uk\/collections\/driveline-steering.oembed","provider":"Hoonies Adrenaline","version":"1.0","type":"link"}