{"products":[{"id":11149767278934,"title":"Almont BAW 212 T01 2.0T GDI 4x4 2025+ Fuel Tank Skid Plate","handle":"almont-baw-212-t01-2-0t-gdi-4x4-2025-fuel-tank-skid-plate-petrol-engine","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eFuel tanks sit low, wide and behind the wheels that flick rocks at them, and a split tank is the one failure that cannot be limped home. For the petrol BAW 212 T01, this Almont fuel tank skid plate lays 15 kg of certified EN AW-5083 H111 duralumin in 6mm SportDuty cut under the GDI model's tank, so ledges, stones and drag-overs are taken by flat alloy with the tank untouched above it. Steel mounting brackets and pre-installed bolts are in the box, and fitting uses the 212's original chassis holes with no modification.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePetrol GDI 212s used on rocky pistes, forest tracks and rutted lanes\u003c\/li\u003e\n\u003cli\u003eRemote-travel builds where fuel security is the difference between a delay and a recovery\u003c\/li\u003e\n\u003cli\u003eOwners finishing the underside after the \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-gdi-4x4-2025-engine-skid-plate-petrol-engines\"\u003epetrol engine plate\u003c\/a\u003e is on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: fuel tank skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212D6\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T GDI petrol 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 15 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCut for the petrol model's tank; the diesel version is a separate plate.\u003c\/li\u003e\n\u003cli\u003eNot fittable if the original tank has been replaced with a larger-capacity one; raised suspension is fine.\u003c\/li\u003e\n\u003cli\u003eGive the plate a yearly pressure wash and bolt check, more often after salt or deep mud.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T GDI petrol 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy does the petrol 212 need its own tank plate?\u003c\/h3\u003e\u003cp\u003eThe plate is shaped around the exact tank installation, and Almont cuts different versions for petrol and diesel vehicles, so matching the engine gets you the correct fit.\u003c\/p\u003e\u003ch3\u003eIs the mounting hardware aluminium too?\u003c\/h3\u003e\u003cp\u003eNo. The plate is duralumin but the anchoring brackets are steel, with the bolts pre-installed for fitting to the original chassis threads.\u003c\/p\u003e","published_at":"2026-07-30T22:21:15+01:00","created_at":"2026-07-29T16:20:20+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158885206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212D6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"535.50","grams":16000,"compare_at_price":null,"position":1,"product_id":11149767278934,"created_at":"2026-07-29T16:20:20+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223314334038,"created_at":"2026-07-29T16:20:20+01:00","position":1,"updated_at":"2026-07-29T16:20:22+01:00","product_id":11149767278934,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212D6-Proteccion-deposito-combustible.jpg?v=1785338422","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149767213398,"title":"Almont BAW 212 T01 2.0T GDI and Diesel 4x4 2025+ Winch Support for Original Bumper","handle":"almont-baw-212-t01-2-0t-gdi-diesel-x4-2025-winch-support-thyssenkrupp-f105-for-original-bumper-f105-6mm","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA winch is only as useful as the steel it pulls against, and the standard BAW 212 T01 bumper has nowhere to bolt one. This Almont winch support is the missing platform: a 15 kg mount fabricated from 6mm THYSSENKRUPP F105 steel, made to sit behind the original bumper of the 2025-on 212 in both GDI petrol and diesel form. It is not a skid plate but a structural mounting support, built by the same Spanish factory that armours the rest of the truck, so self-recovery becomes part of the build rather than an afterthought.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e212 owners adding self-recovery ability while keeping the original bumper\u003c\/li\u003e\n\u003cli\u003eGreen-lane and overland drivers who travel alone and need a pull point that will not flex\u003c\/li\u003e\n\u003cli\u003eBuilds already running Almont underbody plates that now want recovery covered\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: winch mounting support\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212WINCH\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T GDI \/ diesel 4x4, 2025 on, with original bumper\u003c\/li\u003e\n\u003cli\u003eMaterial: 6mm THYSSENKRUPP F105 steel\u003c\/li\u003e\n\u003cli\u003eWeight: 15 kg\u003c\/li\u003e\n\u003cli\u003eExclusions: winch, synthetic rope and fairlead sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade for the original bumper; if an aftermarket bumper is planned, check compatibility with us first.\u003c\/li\u003e\n\u003cli\u003eConfirm your winch's bolt pattern and dimensions against the support before ordering the winch.\u003c\/li\u003e\n\u003cli\u003eAlmont protections and winches can be fitted in either order, so existing plates can stay on the truck.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWinch mounting support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212WINCH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T GDI \/ diesel 4x4, 2025+, original bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTHYSSENKRUPP F105 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs a winch included?\u003c\/h3\u003e\u003cp\u003eNo, this is the steel mounting support only; you choose the winch, rope and fairlead to suit your pulling weight and budget.\u003c\/p\u003e\u003ch3\u003eWhy is this steel when Almont plates are duralumin?\u003c\/h3\u003e\u003cp\u003eWinch loads are concentrated pulling forces rather than sliding impacts, so Almont fabricates its winch supports from 6mm THYSSENKRUPP F105 steel instead of the alloy used for its skid plates.\u003c\/p\u003e","published_at":"2026-07-30T22:21:21+01:00","created_at":"2026-07-29T16:20:17+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Recovery Accessory","tags":["ALMONT4WD","brand:almont4wd","cat:recovery","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:recovery-accessory"],"variants":[{"id":54838158819670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212WINCH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"522.90","grams":15500,"compare_at_price":null,"position":1,"product_id":11149767213398,"created_at":"2026-07-29T16:20:17+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223313711446,"created_at":"2026-07-29T16:20:17+01:00","position":1,"updated_at":"2026-07-29T16:20:20+01:00","product_id":11149767213398,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212WINCH.jpg?v=1785338420","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149767016790,"title":"Almont BAW 212 T01 2.0T Diesel 4x4 2025+ Engine Skid Plate","handle":"almont-baw-212-t01-2-0t-diesel-4x4-2025-engine-skid-plate-diesel-engines","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe sump area is the part of a 4x4 that meets the ground first when a rut is deeper than it looked, and on the new BAW 212 T01 diesel it hangs exactly where rock steps and centre ridges strike. This Almont engine skid plate covers that zone in 8mm certified EN AW-5083 H111 duralumin, the HeavyDuty thickness Almont recommends for heavier vehicles and harder terrain, so a grounding costs you a scratched plate rather than an oil leak far from a workshop. It weighs 5 kg, mounts to the original chassis points and arrives with steel brackets and pre-installed bolts.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDiesel 212 owners planning rocky lanes, mountain pistes or loaded overland travel\u003c\/li\u003e\n\u003cli\u003eDrivers who ground out occasionally and would rather hear alloy slide than metal crack\u003c\/li\u003e\n\u003cli\u003ePairing with the diesel \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-diesel-4x4-2025-fuel-tank-skid-plate-diesel-engine\"\u003efuel tank plate\u003c\/a\u003e to cover the vulnerable underside points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain (since 1992)\u003c\/li\u003e\n\u003cli\u003eProduct Type: engine skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212E8DIESEL\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T diesel 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade for diesel engines; the petrol GDI takes a different \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-gdi-4x4-2025-engine-skid-plate-petrol-engines\"\u003eengine plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFine with raised suspension and a winch; not compatible with body lifts or modified chassis, transmission mounts or links.\u003c\/li\u003e\n\u003cli\u003eFitting uses 17mm and 13mm sockets plus 5mm and 6mm Allen keys.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEngine skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212E8DIESEL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T diesel 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhy 8mm rather than 6mm here?\u003c\/h3\u003e\u003cp\u003eAlmont builds this plate in its HeavyDuty 8mm thickness, the grade it recommends for heavier 4x4s and continental travel over desert and rock, which suits the engine zone that takes the most direct strikes.\u003c\/p\u003e\u003ch3\u003eWill it fit the petrol 212?\u003c\/h3\u003e\u003cp\u003eNo, this version is cut for the diesel; there is a separate plate for petrol GDI engines linked above.\u003c\/p\u003e","published_at":"2026-07-30T22:21:07+01:00","created_at":"2026-07-29T16:20:12+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158590294,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212E8DIESEL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"151.20","grams":5000,"compare_at_price":null,"position":1,"product_id":11149767016790,"created_at":"2026-07-29T16:20:12+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223312236886,"created_at":"2026-07-29T16:20:12+01:00","position":1,"updated_at":"2026-07-29T16:20:14+01:00","product_id":11149767016790,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212E8DIESEL-Turbodiesel.jpg?v=1785338414","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149766984022,"title":"Almont BAW 212 T01 2.0T Diesel 4x4 2025+ AdBlue Tank Skid Plate","handle":"almont-baw-212-t01-2-0t-diesel-4x4-2025-adblue-tank-skid-plate-diesel-engine","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe BAW 212 T01 diesel carries its AdBlue tank low in the chassis, and a rock crest or deep rut can find it long before you hear it coming. This Almont skid plate puts 6mm of certified EN AW-5083 H111 duralumin between the tank and the track, so the plate takes the scrape or the hit instead of a thin plastic reservoir that is expensive to replace and awkward to reach. Almont4WD has built underbody protection in Spain since 1992, and this plate bolts to the 212's original chassis points with the steel brackets and pre-installed bolts supplied in the box.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2025-on BAW 212 T01 2.0T diesel owners heading onto green lanes, rocky pistes or overland routes\u003c\/li\u003e\n\u003cli\u003eDrivers fitting underside cover before the first remote trip rather than after the first strike\u003c\/li\u003e\n\u003cli\u003eBuilds combining the diesel tank, engine and front plates for wider underside cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: AdBlue tank skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212D26\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T diesel 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFor the diesel 212 only; the petrol GDI does not use this plate.\u003c\/li\u003e\n\u003cli\u003eCompatible with raised suspension; not with body-lift kits or modified chassis, mounts or suspension links.\u003c\/li\u003e\n\u003cli\u003eTypical fitting tools are 17mm and 13mm sockets plus 5mm and 6mm Allen keys; check bolt tightness once a year.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAdBlue tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212D26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T diesel 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDoes this also cover the fuel tank?\u003c\/h3\u003e\u003cp\u003eNo. The diesel 212 has a separate \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-diesel-4x4-2025-fuel-tank-skid-plate-diesel-engine\"\u003efuel tank skid plate\u003c\/a\u003e; this one is shaped around the AdBlue tank only.\u003c\/p\u003e\u003ch3\u003eHow much care does the plate need?\u003c\/h3\u003e\u003cp\u003eAlmont recommends a pressure wash once a year, or two to three washes a year after salty or very muddy terrain, plus an annual check of bolt tightness.\u003c\/p\u003e","published_at":"2026-07-30T22:21:05+01:00","created_at":"2026-07-29T16:20:10+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158557526,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212D26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"233.10","grams":5000,"compare_at_price":null,"position":1,"product_id":11149766984022,"created_at":"2026-07-29T16:20:11+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223312073046,"created_at":"2026-07-29T16:20:11+01:00","position":1,"updated_at":"2026-07-29T16:20:13+01:00","product_id":11149766984022,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212D26-Adblue.jpg?v=1785338413","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149767246166,"title":"Almont BAW 212 T01 2.0T GDI 4x4 2025+ Engine Skid Plate","handle":"almont-baw-212-t01-2-0t-gdi-4x4-2025-engine-skid-plate-petrol-engines","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eGround clearance always runs out mid-obstacle, and when the petrol BAW 212 T01 settles onto a rock step it is the engine's underside that meets it. This Almont engine skid plate for the 2.0T GDI covers that strike zone in 8mm certified EN AW-5083 H111 duralumin at only 4 kg, so the lightest plate in the 212 line-up stands between hard ground and the priciest casting on the truck. Almont has cut underbody protection in Spain since 1992, and this plate bolts straight to the original chassis points with its supplied steel brackets and pre-fitted bolts.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePetrol GDI 212 owners using the truck on rocky lanes, ruts and loose climbs\u003c\/li\u003e\n\u003cli\u003eDrivers adding cover with almost no weight cost, at 4 kg all in\u003c\/li\u003e\n\u003cli\u003eBuilds pairing this with the petrol \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-gdi-4x4-2025-fuel-tank-skid-plate-petrol-engine\"\u003efuel tank plate\u003c\/a\u003e for the exposed underside points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: engine skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212E8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T GDI petrol 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 4 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePetrol engines only; diesel 212s take the diesel-specific engine plate instead.\u003c\/li\u003e\n\u003cli\u003eCompatible with raised suspension; not with body-lift kits or modified chassis, mounts or links.\u003c\/li\u003e\n\u003cli\u003eFits with 17mm and 13mm sockets plus 5mm and 6mm Allen keys; check bolts annually.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEngine skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212E8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T GDI petrol 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eCan I fit this to a diesel 212?\u003c\/h3\u003e\u003cp\u003eNo, this cut is for the GDI petrol; the diesel has its own engine plate shaped for that installation.\u003c\/p\u003e\u003ch3\u003eDoes 4 kg of alloy really make a difference?\u003c\/h3\u003e\u003cp\u003eThe job is to spread and deflect a strike before it reaches the engine, which is what an 8mm hard alloy plate over the impact zone does; the low weight simply means there is no meaningful payload penalty for carrying it.\u003c\/p\u003e","published_at":"2026-07-30T22:21:12+01:00","created_at":"2026-07-29T16:20:18+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158852438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212E8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"138.60","grams":5000,"compare_at_price":null,"position":1,"product_id":11149767246166,"created_at":"2026-07-29T16:20:19+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223314039126,"created_at":"2026-07-29T16:20:19+01:00","position":1,"updated_at":"2026-07-29T16:20:22+01:00","product_id":11149767246166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212E8-Gasolina.jpg?v=1785338422","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149767082326,"title":"Almont BAW 212 T01 2.0T GDI and Diesel 4x4 2025+ Front Skid Plate","handle":"almont-baw-212-t01-2-0t-gdi-diesel-4x4-2025-front-skid-plate-petrol-and-diesel-engines","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThe nose of the BAW 212 T01 leads every climb, and it is the first panel to meet a rock crest, a bank or flying gravel. This Almont front skid plate covers that leading edge in 8mm certified EN AW-5083 H111 duralumin, one plate for both the 2.0T GDI petrol and the 2.0T diesel, weighing 10 kg and bolting to the original chassis points with the supplied steel brackets. It is also one of the cleverer plates in the range: Almont makes it in two parts precisely so the front section can come off on its own when the engine needs a service.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAny 2025-on 212 heading off tarmac, petrol or diesel, as the first plate on the vehicle\u003c\/li\u003e\n\u003cli\u003eDrivers on rocky approaches and ledges where the front underside strikes before anything else\u003c\/li\u003e\n\u003cli\u003eBuilds that will add the \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-gdi-diesel-4x4-2025-gearbox-and-transfer-skid-plate\"\u003egearbox and transfer plate\u003c\/a\u003e behind it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOil Changes With The Plate Fitted\u003c\/h2\u003e\u003cp\u003eAlmont builds this guard as a two-part assembly so the first front section can be removed to change the oil filter, keeping routine servicing simple with the rest of the plate still on the truck.\u003c\/p\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: front skid plate, two-part\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212A8\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T GDI and diesel 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 10 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plates, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne part number covers petrol and diesel engines, so no engine choice is needed here.\u003c\/li\u003e\n\u003cli\u003eCompatible with raised suspension and with a winch; not with body-lift kits or modified chassis or mounts.\u003c\/li\u003e\n\u003cli\u003eFitting tools are 17mm and 13mm sockets plus 5mm and 6mm Allen keys.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront skid plate (two-part)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212A8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T GDI \/ diesel 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eDo I have to remove the whole plate to service the engine?\u003c\/h3\u003e\u003cp\u003eNo. The plate is made in two parts so the front piece unbolts on its own for oil filter access.\u003c\/p\u003e\u003ch3\u003eWill it work with a winch fitted?\u003c\/h3\u003e\u003cp\u003eYes. Almont confirms its protections can be fitted with a winch already installed, or the winch added afterwards.\u003c\/p\u003e","published_at":"2026-07-30T22:21:17+01:00","created_at":"2026-07-29T16:20:14+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158655830,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212A8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"371.70","grams":10000,"compare_at_price":null,"position":1,"product_id":11149767082326,"created_at":"2026-07-29T16:20:15+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223312662870,"created_at":"2026-07-29T16:20:15+01:00","position":1,"updated_at":"2026-07-29T16:20:17+01:00","product_id":11149767082326,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212A8.jpg?v=1785338417","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":11149767180630,"title":"Almont BAW 212 T01 2.0T GDI and Diesel 4x4 2025+ Gearbox and Transfer Skid Plate","handle":"almont-baw-212-t01-2-0t-gdi-diesel-4x4-2025-gearbox-and-transfer-skid-plate","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eBetween the axles of the BAW 212 T01 sit the gearbox and transfer case, the low-hanging alloy castings that centre ridges and rock steps reach for the moment a track gets crossed up. This Almont gearbox and transfer skid plate covers that central run in 8mm certified EN AW-5083 H111 duralumin, cut in separate versions for the 2.0T GDI petrol and the turbodiesel, so drag-overs polish the plate rather than the casings that would stop the truck. It anchors to the original chassis points with steel brackets and pre-installed bolts, and carries a 3-year warranty against cracking.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e212 drivers tackling rock steps, ridged tracks and deep ruts where the centre of the truck grounds\u003c\/li\u003e\n\u003cli\u003eOverland and expedition builds protecting the driveline before remote travel\u003c\/li\u003e\n\u003cli\u003eFollowing on from the \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-gdi-diesel-4x4-2025-front-skid-plate-petrol-and-diesel-engines\"\u003etwo-part front plate\u003c\/a\u003e for a continuous protected run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: gearbox and transfer case skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212B8G (petrol) or PDB212B8D (turbodiesel)\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T GDI \/ diesel 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 8mm HeavyDuty\u003c\/li\u003e\n\u003cli\u003eBuyer Checks: choose the engine version that matches your 212 at the variant picker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo versions exist, petrol (Gasolina) and turbodiesel; select the one for your engine before ordering.\u003c\/li\u003e\n\u003cli\u003eCompatible with raised suspension; not with body lifts, diff-drop kits or modified transmission mounts.\u003c\/li\u003e\n\u003cli\u003eCheck bolt tightness once a year, and pressure wash the plate after muddy or salty terrain.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGearbox and transfer skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212B8G \/ PDB212B8D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T GDI \/ diesel 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e8mm (HeavyDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs the petrol plate different from the diesel one?\u003c\/h3\u003e\u003cp\u003eYes, each engine has its own part number, which is why the variant choice matters; the plates are otherwise the same 8mm duralumin build.\u003c\/p\u003e\u003ch3\u003eDoes it come with everything needed to fit it?\u003c\/h3\u003e\u003cp\u003eYes: the plate ships with steel mounting brackets, pre-installed bolts and Almont's certificate and instruction manual, anchoring to the original chassis holes.\u003c\/p\u003e","published_at":"2026-07-30T22:21:19+01:00","created_at":"2026-07-29T16:20:16+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158754134,"title":"Gasolina","option1":"Gasolina","option2":null,"option3":null,"sku":"PDB212B8G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"627.48","grams":19500,"compare_at_price":null,"position":1,"product_id":11149767180630,"created_at":"2026-07-29T16:20:16+01:00","updated_at":"2026-08-16T14:20:18+01:00"},{"id":54838158786902,"title":"Turbodiésel","option1":"Turbodiésel","option2":null,"option3":null,"sku":"PDB212B8D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"627.48","grams":19500,"compare_at_price":null,"position":2,"product_id":11149767180630,"created_at":"2026-07-29T16:20:16+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223312957782,"created_at":"2026-07-29T16:20:16+01:00","position":1,"updated_at":"2026-07-29T16:20:18+01:00","product_id":11149767180630,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212B8-proteccion-caja-de-cambio-y-reductora.jpg?v=1785338418","width":1080,"height":1080}],"options":[{"name":"Engine","position":1,"values":["Gasolina","Turbodiésel"]}]},{"id":11149767049558,"title":"Almont BAW 212 T01 2.0T Diesel 4x4 2025+ Fuel Tank Skid Plate","handle":"almont-baw-212-t01-2-0t-diesel-4x4-2025-fuel-tank-skid-plate-diesel-engine","body_html":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eA holed fuel tank ends a trip on the spot, and the tank on the BAW 212 T01 diesel sits in the debris path of every rocky climb and rutted descent. This Almont fuel tank skid plate is a substantial piece of protection: 16 kg of certified EN AW-5083 H111 duralumin in 6mm SportDuty cut, shaped around the diesel model's tank so stones, ledges and drag-overs meet flat alloy instead of the tank skin. Like the rest of the range it bolts to the original chassis holes with steel brackets and pre-installed bolts, and it carries Almont's 3-year warranty against cracking.\u003c\/p\u003e\u003ch2\u003eBest For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDiesel 212 drivers covering rocky or heavily rutted ground where the tank drags first\u003c\/li\u003e\n\u003cli\u003eOverland builds where a tank strike hundreds of miles from recovery is the real risk being priced in\u003c\/li\u003e\n\u003cli\u003eCompleting the underside alongside the \u003ca href=\"\/products\/almont-baw-212-t01-2-0t-diesel-4x4-2025-adblue-tank-skid-plate-diesel-engine\"\u003eAdBlue tank plate\u003c\/a\u003e fitted to the same vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Specs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Almont4WD, Spain\u003c\/li\u003e\n\u003cli\u003eProduct Type: fuel tank skid plate\u003c\/li\u003e\n\u003cli\u003eSKU: PDB212D6Diesel\u003c\/li\u003e\n\u003cli\u003eVehicle Application: BAW 212 T01 2.0T diesel 4x4, 2025 on\u003c\/li\u003e\n\u003cli\u003eMaterial: certified EN AW-5083 H111 duralumin, 6mm SportDuty\u003c\/li\u003e\n\u003cli\u003eWeight: 16 kg\u003c\/li\u003e\n\u003cli\u003eIncluded Items: plate, steel mounting brackets, pre-installed bolts, certificate and instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment And Setup Checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShaped for the diesel model's tank; petrol GDI vehicles take their own tank plate.\u003c\/li\u003e\n\u003cli\u003eCannot be fitted if the original tank has been swapped for a larger-capacity replacement; raised suspension is fine.\u003c\/li\u003e\n\u003cli\u003ePlan an annual bolt-tightness check and a pressure wash, more often after mud or salted roads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAlmont4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel tank skid plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePDB212D6Diesel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eBAW 212 T01 2.0T diesel 4x4, 2025+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEN AW-5083 H111 duralumin, certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e6mm (SportDuty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years against cracking of the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this the same plate as the petrol version?\u003c\/h3\u003e\u003cp\u003eNo. Almont cuts a separate tank plate for each engine, so order this one for the diesel and the petrol version for the GDI.\u003c\/p\u003e\u003ch3\u003eDoes it need anything welded or drilled?\u003c\/h3\u003e\u003cp\u003eNo welding is stated for this plate; it anchors to the 212's original chassis holes and threads using the supplied steel brackets and bolts.\u003c\/p\u003e","published_at":"2026-07-30T22:21:10+01:00","created_at":"2026-07-29T16:20:13+01:00","updated_at":"2026-08-16T14:20:18+01:00","vendor":"ALMONT4WD","product_type":"Skid Plate","tags":["ALMONT4WD","brand:almont4wd","cat:protection","dept:vehicle-accessories","fits:baw-212-t01-2-0t-4x4","make:baw","type:skid-plate"],"variants":[{"id":54838158623062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PDB212D6Diesel","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"567.00","grams":17000,"compare_at_price":null,"position":1,"product_id":11149767049558,"created_at":"2026-07-29T16:20:13+01:00","updated_at":"2026-08-16T14:20:18+01:00"}],"images":[{"id":83223312466262,"created_at":"2026-07-29T16:20:13+01:00","position":1,"updated_at":"2026-07-29T16:20:16+01:00","product_id":11149767049558,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0952\/1849\/9926\/files\/PDB212D6DIESEL.jpg?v=1785338416","width":1080,"height":1080}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]}]}